Panasonic KX-TG7100E User manual

PQQW15103YA DC0206DS2076
Digital Cordless Phone
Model No. KX-TG7100E/KX-TG7102E
KX-TG7103E
Digital Cordless Answering System
Model No. KX-TG7120E/KX-TG7122E
KX-TG7123E
1Connections
Quick Guide
Base unit
Charger (KX-TG7102, KX-TG7103, KX-TG7122, and KX-TG7123 only)
(220–240 V, 50 Hz)
To telephone network
Hook
Use only the included AC adaptor
and telephone line cord.
Use only the included AC adaptor.
(220–240 V, 50 Hz)
Hooks
TG7100_7120E(e)_QG.fm Page 1 Wednesday, July 5, 2006 10:18 AM

–2 –
2Battery installation/
Battery charge (Initial charge: 7 hours)
Note:
LUse only the included rechargeable batteries.
3Symbols used in these operating instructions
Date and time
1{j/OK}
2Press {^} or {V} to select “Handset Setup”. i{>}
3KX-TG7100/KX-TG7102/KX-TG7103
Press {^} or {V} to select “Set Date & Time”. i{>}
KX-TG7120/KX-TG7122/KX-TG7123
Press {^} or {V} to select “Time Settings”. i{>}iPress {^} or {V} to select “Set
Date & Time”. i{>}
4Enter the current day, month, and year.
5Enter the current hour and minute.
6{j/OK}i{ih}
Symbol Meaning
{j/OK}Press {j/OK}.
iProceed to the next operation.
“” Select the words in quotations shown on the display (e.g., “Handset
Setup”) by pressing {^} or {V}.
*1 The pictured model is KX-TG7100.
Base unit *1 Charger *2
*2 KX-TG7102, KX-TG7103,
Charge
contact
KX-TG7122, and KX-TG7123 only
TG7100_7120E(e)_QG.fm Page 2 Wednesday, July 5, 2006 10:18 AM

–3 –
4Basic operations
Answering system (KX-TG7120, KX-TG7122, and KX-TG7123 only)
Feature Operation
Making a call Dial the phone number. i{C}/{s}
Answering a call {C}
Hanging up {ih}
Receiver/speaker volume Press {^} or {V} while on a call.
Last number redial {R} i{C}
Making a call with redial list {R} iPress {^} or {V} to select the desired
number. i{C}
Handset phonebook: storing an
entry (name and phone
numbers)
{k} i{j/OK}i“New Entry”i{>}i
Enter the party’s name (16 characters max.). i
{j/OK}iEnter the party’s phone number (24 digits
max.). i{j/OK}i“Save”i{>}i{ih}
LTo enter a name, see the character table in the
operating instructions.
Handset phonebook: making a
call
{k} iPress {^} or {V} to display the desired entry.
i{C}
Handset ringer volume {j/OK}i“Handset Setup”i{>}i
“Ringer Setup”i{>}i“Ringer Volume”
i{>}iPress {^} or {V} to select the desired
volume. i{>}i{ih}
Changing ringtone
(outside calls)
{j/OK}i“Handset Setup”i{>}i
“Ringer Setup”i{>}i“Ext. Ringtone”
i{>}iSelect the desired ringtone. i{>}i
{ih}
Feature Operation
Answering on/off {j/OK}i“Answer System”i{>}i
“Answer On”or “Answer Off”i{>}i{ih}
Listening to messages {j/OK}i“Answer System”i{>}i“Play
New Msg.”or “Play All Msg.”i{>}
TG7100_7120E(e)_QG.fm Page 3 Wednesday, July 5, 2006 10:18 AM

–4 –
5Frequently asked questions
Question Cause & solution
What kind of power outlet
should I connect the AC
adaptor to?
Connect the AC adaptor to a 220–240 V outlet.
Why is wflashing? LThe handset is too far from the base unit. Move closer.
LThe AC adaptor is not connected. Check the
connections.
LYou are using the handset or base unit in an area with
high electrical interference. Place the handset and base
unit away from interference sources, such as antennas
and mobile phones.
LThe handset is not registered to the base unit. Register it.
{j/OK}i“Handset Setup”i{>}i
“Registration”i{>}i“Register H.set”i
{>}iPress and hold {x} on the base unit for about 3
seconds, until the registration tone sounds. iWait until
“Enter Base PIN”is displayed. iEnter the base unit
PIN (default: “0000”). i{j/OK}
Why is the handset display
blank?
The handset is not turned on. To turn the power on, press
{ih} for about 1 second.
What should I do when the
handset does not turn on?
LMake sure that the batteries are installed correctly.
LFully charge the batteries.
LClean the charge contacts and charge again.
How long should I charge new
batteries?
Charge the batteries for about 7 hours.
How long is the battery
operating time?
When you are using fully-charged Ni-MH batteries
(included batteries) ;
In continuous use: 17 hours max.
In continuous standby mode: 180 hours max.
LIt is normal for batteries not to reach full capacity at the
initial charge. Maximum battery performance is reached
after a few complete cycles of charge/discharge (use).
LActual battery performance depends on a combination of
how often the handset is in use and how often it is not in
use (standby).
Can I keep the handset on the
base unit or charger when I
am not using it?
LEven after the handset is fully charged, the handset can
be left on the base unit or charger without any ill effect on
the batteries.
TG7100_7120E(e)_QG.fm Page 4 Wednesday, July 5, 2006 10:18 AM

–5 –
6Optional service (Caller ID)
If you subscribe to Caller ID service, you can:
7Sales and support information
.
When should I replace the
batteries?
If the batteries are fully charged until 1 is displayed, but
3 is displayed after a few calls, replace the batteries with
new ones.
What is a PIN? The PIN is a 4-digit number that must be entered in order
to change certain base unit settings. The default PIN is
“0000”.
What do I need to do to
display caller information?
LYou need to subscribe to Caller ID service. Consult your
service provider/telephone company for details.
LThe message “You must first subscribe to
Caller ID.” will be displayed until you receive caller
information after subscribing to Caller ID service.
– display caller information
Customer Care Helpline Tel. No.: U.K. 08700 100 076 / R.O.I. 01289 8333
Question Cause & solution
Tom
012345
Customer Care Centre
LFor customers within the UK: 08700 100 076
LFor customers within the Republic of Ireland: 01289 8333
LVisit our website for product information: www.panasonic.co.uk
LE-mail: [e-mail]
Direct Sales at Panasonic UK
LOrder accessory and consumable items for your product with ease and confidence by
phoning our Customer Care Centre Monday - Thursday 9:00am - 5:30pm, Friday 9:30am
- 5:30pm (Excluding public holidays).
L Or go on line through our Internet Accessory ordering application at www.panasonic.co.uk
L Most major credit and debit cards accepted.
L All enquiries transactions and distribution facilities are provided directly by Panasonic UK Ltd.
L It couldn t be simpler!
L Also available through our Internet is direct shopping for a wide range of finished products,
take a browse on our website for further details.
TG7100_7120E(e)_QG.fm Page 5 Wednesday, July 5, 2006 10:18 AM

IMPORTANT
If you have problems setting up or operating this product please call
the Panasonic DECT Helpline
08700 100 076 (UK)
01289 8333 (Repl of Ireland)
TG7100_7120E(e)_QG.fm Page 6 Wednesday, July 5, 2006 10:18 AM