Panasonic KX-TGA106CM User manual

© Panasonic Communications Co., Ltd. 2009.
Unauthorized copying and distribution is a violation
of law.
ORDER NO. KM40903853CE
F1
Telephone Equipment
Model No. KX-TG1061CM
KX-TGA106CM
Expandable Digital Corded/Cordless
Answering System
M: Metallic Grey Version
(for Canada)

2
KX-TG1061CM/KX-TGA106CM

3
KX-TG1061CM/KX-TGA106CM
TABLE OF CONTENTS
PAGE
1 Safety Precautions----------------------------------------------- 4
1.1. For Service Technicians --------------------------------- 4
2 Warning -------------------------------------------------------------- 4
2.1. Battery Caution--------------------------------------------- 4
3 Specifications ----------------------------------------------------- 5
4 Location of Controls and Components ------------------- 6
4.1. Controls ------------------------------------------------------ 6
5 Installation Instructions ---------------------------------------- 7
5.1. Setting up---------------------------------------------------- 7
5.2. Battery-------------------------------------------------------- 7
6 Operating Instructions------------------------------------------ 9
6.1. Programmable settings ---------------------------------- 9
6.2. Registering a Cordless Handset to a Base
Unit -----------------------------------------------------------13
6.3. Copying Phonebook Entries ---------------------------14
6.4. Dialing Mode ----------------------------------------------14
6.5. Error Messages -------------------------------------------15
6.6. Troubleshooting -------------------------------------------16
7 Schematic Diagram ---------------------------------------------19
7.1. For Schematic Diagram---------------------------------19
7.2. Schematic Diagram (Base Unit_Main) --------------20
7.3. Schematic Diagram (Base Unit_RF Part) ----------22
7.4. Schematic Diagram (Base Unit_Operation) -------23
7.5. Schematic Diagram (Cordless Handset) -----------24
7.6. Schematic Diagram (Charger Unit) ------------------26
8 Exploded View and Replacement Parts List -----------27
8.1. KX-TG1061CM--------------------------------------------27
8.2. KX-TGA106CM -------------------------------------------28

4
KX-TG1061CM/KX-TGA106CM
1 Safety Precautions
1.1. For Service Technicians
•Repair service shall be provided in accordance with repair technology information such as service manual so as to
prevent fires, injury or electric shock, which can be caused by improper repair work.
1. When repair services are provided, neither the products nor their parts or members shall be remodeled.
2. If a lead wire assembly is supplied as a repair part, the lead wire assembly shall be replaced.
3. FASTON terminals shall be plugged straight in and unplugged straight out.
•ICs and LSIs are vulnerable to static electricity.
When repairing, the following precautions will help prevent recurring malfunctions.
1. Cover plastic parts boxes with aluminum foil.
2. Ground the soldering irons.
3. Use a conductive mat on worktable.
4. Do not grasp IC or LSI pins with bare fingers.
2Warning
2.1. Battery Caution
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

5
KX-TG1061CM/KX-TGA106CM
3 Specifications
Note:
• Design and specifications are subject to change without notice.
Note for service:
• Operation range: Up to 300 m outdoors, Up to 50 m indoors, depending on the condition.
• Optional headset: RP-TCA86, RP-TCA94, RP-TCA95

6
KX-TG1061CM/KX-TGA106CM
4 Location of Controls and
Components
4.1. Controls
4.1.1. Base Unit
4.1.2. Cordless Handset

7
KX-TG1061CM/KX-TGA106CM
5 Installation Instructions
5.1. Setting up
5.1.1. Connections
Note:
• The AC adaptor must remain connected at all times. (It is
normal for the adaptor to feel warm during use.)
• The AC adaptor should be connected to a vertically oriented
or floor-mounted AC outlet. Do not connect the AC adaptor
to a ceilingmounted AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The base unit will work as a standard telephone using
power from the telephone line, so you can make and
answer outside calls with the corded handset. However, this
operation may not work properly depending on area or tele-
phone line’s condition. The base unit speakerphone and the
cordless handset will not function during a power failure.
5.2. Battery
5.2.1. Battery Installation
Note for service:
The battery strength may not be indicated correctly if the
battery is disconnected and connected again, even after it is
fully charged. In that case, by recharging the battery as
mentioned above, you will get a correct indication of the
battery strength.

8
KX-TG1061CM/KX-TGA106CM
5.2.2. Battery Charge
Charge for about 7 hours.
• When the batteries are fully charged, the charge indicator
goes off.
Note:
• It is normal for the handset to feel warm during charging.
• Clean the charge contacts of the handset and charger with a
soft and dry cloth.
Clean if the unit is exposed to grease, dust, or high humidity.
5.2.3. Battery Level
Note:
• The batteries need to be charged if the cordless handset
beeps while you are engaged in a call or operating the
answering system remotely.
5.2.4. Panasonic Ni-MH Battery Perfor-
mance (supplied batteries)
Note:
• Actual battery performance depends on a combination of
how often the handset is in use and how often it is not in use
(standby).
• Even after the handset is fully charged, the handset can be
left on the charger without any ill effect on the batteries.
• The battery level may not be displayed correctly after you
replace the batteries. In this case, place the handset on the
charger and let it charge for at least 7 hours.

9
KX-TG1061CM/KX-TGA106CM
6 Operating Instructions
6.1. Programmable settings
You can customize the unit by programming the following features.
To access the features, there are 2 methods:
- scrolling through the display menus.
- using the direct commands.
• Direct command is the main method used in this service manual.
6.1.1. Programming by scrolling through the display menus

10
KX-TG1061CM/KX-TGA106CM

11
KX-TG1061CM/KX-TGA106CM
6.1.2. Programming using the Direct Commands

12
KX-TG1061CM/KX-TGA106CM

13
KX-TG1061CM/KX-TGA106CM
6.2. Registering a Cordless Handset to a Base Unit
6.2.1. Deregistering a Cordless Handset

14
KX-TG1061CM/KX-TGA106CM
6.3. Copying Phonebook Entries
You can copy phonebook entries from the base unit to a cordless handset , and vice versa.
Important:
• Groups (including their names and ringer tones) are not copied.
• You cannot make phonebook copy between cordless handsets directly.
However it is possible by first copying a cordless handset’s phonebook entries to the base unit, then copying the base unit’s
phonebook entries to another cordless handset.
6.3.1. Copying All Entries
6.4. Dialing Mode

15
KX-TG1061CM/KX-TGA106CM
6.5. Error Messages

16
KX-TG1061CM/KX-TGA106CM
6.6. Troubleshooting
If you still have difficulties after following the instructions in this section, disconnect the base unit’s AC adaptor, then reconnect the
base unit’s AC adaptor. Remove the batteries from the cordless handset, and then insert the batteries into the cordless handset
again.

17
KX-TG1061CM/KX-TGA106CM

18
KX-TG1061CM/KX-TGA106CM

19
KX-TG1061CM/KX-TGA106CM
7 Schematic Diagram
7.1. For Schematic Diagram
7.1.1. Base Unit (Schematic Diagram (Base Unit_Main))
Notes:
1. DC voltage measurements are taken with voltmeter from the negative voltage line.
2. The schematic diagrams may be modified at any time with the development of new technology.
7.1.2. Cordless Handset (Schematic Diagram (Cordless Handset))
Notes:
1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagrams may be modified at any time with the development of new technology.
7.1.3. Charger Unit (Schematic Diagram (Charger Unit))
Notes:
1. DC voltage measurements are taken with voltmeter from the negative voltage line.
2. This schematic diagram may be modified at any time with the development of new technology.

20
KX-TG1061CM/KX-TGA106CM
7.2. Schematic Diagram (Base Unit_Main)
GND
GND
100n *C547 10n
*C549
GND
560*R545 560R544 560R543
10k
*R541
270k
*R542
GND
NC
C542
GND
UTX
URX
GND
100n
C531
GND_C
GND
1u
C533
GND
GND
1n
C225
GND
100n
C224
D201 5.1V
1u
C203
C223
330p
2.2k
R224
100n
C204
100u C202
GND
L201
100k
R207
10pC209
+1.8V
100n
C227
100nC201
2.2k
R222
100n
C208
100n
C207
D202 5.1V
1k
R202
NC
C226
GND
GND
C212 100n
GND
L202
1n
C206
GND
IC201 1
GPIO4/PCM_DI
2
GPIO5/PCM_DO
9
SPI_DI
3
GPIO6/PCM_CLK
4
GPIO7/PCM_FSC
5
VDD1
6
VDDIO1
7
CLK
8
*PF
10
SPI_DO
11
SPI_CLK
12
SPI_EN
13
AVD1
14
GPO9/PAOUTp
15
VDDPA
16
GPO8/PAOUTm
17 GPIO0
18 GPIO1
19 VDD2
20 VDDIO2
21 GPIO2
22 GPIO3
23 *RST
24 AVD2
25 *LSR 26 LSRp 27 MICh 28 *MIC 29 VREFm 30 VBUF 31 MICp 32 VREFp
33
Fin
100
R211
0R612
0R611
*Q603
ANS_LED
Q602
SP-Phone_LED
Q601
LCD-Backlight
*Q604
NEWMES_LED
GND
GND
GND
3.3k*R546
GND
UVCC
TAM_RESET
TAM_EN
TAM_WP
SPI_CLK SPI_DO
SPI_DI
FLASH_CSn
*WP
SPI2_CLK
SPI2_DI
SPI2_DO
MIC
VDD4
*Q541
*IC541
1*CE
2SO
3*WP
4VSS 5
SI
6
SCK
7
*HOLD
8
VDD
CN1-2
CN1-1
CN1-3
CN1-4
CN1-5
CN1-6
CN1-7
CN1-8
CN1-9
CN1-10
CN2-1
CN2-2
CN2-3
CN2-4
CN2-5
CN2-6
R206
1M
+1.8V
CLK
NCC218
NCC219
NCC220
NCC221
NCC222
GND
GND
2.2k
R221
2.2k
R225
390
R602
390
*R603
390
*R604
CN2-7
CN2-8
CN2-9
CN2-10
CN2-11
CN2-12
0
R617
CN1-11
CN1-12
GND
L224
L221
L222
L223
2.2k
R232
470
R236
33
R233
33
R234
10p
C233
10p
C234
GND
GND
10p
C232
4.7V D235
0
R213
1u
C216
0
R214
1u
C215
4.7k
R215
CN2-14
CN2-13
4.7u
C213
4.7u
C214
CN1-14
CN1-13
HOOK2-6
HOOK2-4
HOOK_DET
+4.4V
100n
C235
+3.2V_PD
100u C211
NC D222
GND
NC D221
MIC+
MIC-
GND
C624 NC C621 NC C622 NC
GND
C625 NC C623 NC
GND
C615 NC C614 NC C616 NC C613 NC C611 NC C612 NC
NC
C617
C631 NC C632 NC C636 NC
NC
C637
GND
C635 NC C633 NC C634 NC
C645 NC C642 NC C643 NC C641 NC
GND
C644 NC
2.2nC241 2.2nC242
GND
NC
C651
GND
GND
NC
C652
GND
NC
C653
GND
NC
C654
GND
470p C661
GND
470p C662
GND
470p C663
0
RA611
1
2
3
45
6
7
8
NC
C682
NC
C672
NC
C671
NC
C673
NC
C681
4.7k
*R547
Q605
Q606
Q607
10
R209
NC D223 NC D224
C380
NC
NC C381 NC C382 NC C383
GND
NC
C384
GND
CP_VOUT1
+3.2V_PD
0
R618
0
R620
0
R621
0
R622
10p C683
10p C684
C685 NC C686 NC
GND
0
R619
HOOK1HOOK2
HOOK3
2.2nC391 2.2nC392 680pC393 680pC394
GND
10pC243 10pC244
L203
L204
4.7k
R217
GND
NCR386
0R387
VDD_flash_LCD
VDD_flash_LCD
NC
C553
NC
C552
NC
C551
NC
C550
GND
100n *C548
PCM_DI
PCM_CLK
PCM_FSC
KEY0
KEY1
KEY2
KEY3
KEY4
SDA2
SCL2
FLASH_CSn
SPI_CLK
SPI_DO
SPI_DI
KEY0
KEY1
KEY2
KEY3
KEY4
LED1
LED2
LED3
LED4
ROW0
SPI2_DI
SPI2_DO
KEY6
POWER_FAIL
HOOK_DET
LED4
LED3
LED2
LED1
PCM_DO
ROW3
TAM_RESET
SPI2_CLK
Pulse
ROW1
TAM_EN
KEY5
Line_Seisure
ROW4
ROW3
ROW2
ROW1
ROW0
LCD_CS_P
LCD_RESET_P
LCD_CD_P
ROW2
CLK
CLK
TAM_WP
LCD_CD
LCD_RESET
LCD_CS
SPI_DO
SPI_CLK
FLASH_CSn
SPI_DI
SPI_DO
SPI_CLK
+
-
TO HANDSET
HS_MIC_P
HS_SP_P
HS_SP_N
HS_MIC_N
SP+
SP-
(1)
(3)
(4)
(5)
(7)
(9)
(11)
(13)
(15)
(17)
(2)
(6)
(8)
(10)
(12)
(14)
(16)
(19)
(21)
(23)
(18)
(20)
(22)
(25)
(27)
(28)
(29)
(24)
(26)
NC: No Components