Panasonic FZ-M1 Series User manual

Getting Started
Useful Information
Troubleshooting
Appendix
Please read these instructions carefully before using this product, and save this
manual for future use.
OPERATING INSTRUCTIONS
Basic Guide
Tablet Computer
Model No. FZ-M1 series
Contents
Getting Started
Introduction.................................................2
Description of Parts ....................................4
First-time Operation....................................7
Turning On / Turning Off...........................12
Useful Information
Handling and Maintenance.......................14
Installing Software ....................................21
Troubleshooting
Troubleshooting (Basic)............................23
Appendix
LIMITED USE LICENSE AGREEMENT...29
Contrat de licence d’usage limité..............33
Specications ...........................................37
LIMITED WARRANTY..............................42
Standard Limited Warranty.......................51
Downloaded from ManualsNet.com search engine

2
Getting Started
Introduction
Thank you for purchasing this Panasonic product. For optimum performance and
safety, please read these instructions carefully.
nTerms and illustrations in these instructions
CAUTION : Conditions that may result in minor or moderate
injury.
NOTE : Useful and helpful information.
“Windows 10 Pro 64-bit” as “Windows” or “Windows 10”
Enter
: Press [Enter] key.
Alt
+
Del
: Press and hold [Alt] key, and then press [Del]
key.
è: Page in these Operating Instructions.
: Reference to the on-screen manuals.
(Start) - [All Programs] : Touch (Start), and then touch [All Programs].
You may need to double-touch in some cases.
l Someillustrationsaresimpliedtohelpyourunderstandingandmaylookdif-
ferent from the actual unit.
lIf you do not sign in as an administrator, you cannot use some functions or
cannot display some screens.
lRefer for the latest information about optional products to the catalogs, etc.
lIn these instructions, the names and terms are referred as follows.
“Multilingual User Interface” as “MUI”
lScreen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these
instructions are different from the actual screen messages. For example, [Flight
mode] may be displayed instead of [Airplane mode] in some language prefer-
ence.)
nDisclaimer
Computerspecicationsandmanualsaresubjecttochangewithoutnotice.Pana-
sonic Corporation assumes no liability for damage incurred directly or indirectly
from errors, omissions or discrepancies between the computer and the manuals.
Downloaded from ManualsNet.com search engine

3
Getting Started
nTrademarks
Microsoft, Windows, and the Windows logo are registered trademarks or trade-
marks of Microsoft Corporation of the United States and/or other countries.
Intel, Core, and PROSet are either registered trademarks or trademarks of Intel
Corporation.
microSDXC Logo is a trademark of SD-3C, LLC.
Adobe and Flash are registered trademarks or trademarks of the United States
and/or other countries.
Bluetooth®is a registered trademark owned by Bluetooth SIG, Inc., U.S.A. and
licensed to Panasonic Corporation.
ThetermsHDMIandHDMIHigh-DenitionMultimediaInterface,andtheHDMI
Logo are trademarks or registered trademarks of HDMI Licensing Administrator,
Inc. in the United States and other countries.
Names of products, brands, etc., appearing in this manual are trademarks or reg-
istered trademarks of their respective own companies.
nOn-screen Manual
For further information about the computer, you can refer to the on-screen manual.
lOperating Instructions - Reference Manual
The Operating Instructions - Reference Manual contains the practical informa-
tion to help you fully enjoy the computer’s performance.
lImportant Battery Tips
The Important Battery Tips will provide you with the battery information so that
you can use the battery in the optimum condition to obtain longer operation
time.
To access the on-screen manuals, follow the steps below.
On the Start screen, touch the [Manual Selector] tile, and select the on-screen
manual.
NOTE
l[Contents] tab or [Search] tab is displayed on the left side of the window.
Select tab and display the desired item.
Downloaded from ManualsNet.com search engine

4
Getting Started
A: Wireless WAN Antenna
<Only for model with wireless
WAN>
èOperating Instructions - Ref-
erence Manual “Wireless WAN”
B: Wireless LAN Antenna
<Only for model with wireless LAN>
èOperating Instructions - Ref-
erence Manual “Wireless LAN”
C: Ambient Light Sensor
The ambient light sensor is
equipped with an automatic bright-
ness adjustment function that ad-
justs the display screen. (èpage 16)
Front Camera
 è Operating Instructions - Ref-
erence Manual “Camera”
D: Camera Lens
E: Camera Indicator
F: LED Indicators
: Power Indicator
Off: Display off/Hibernation,
Green: Display on.
: Drive status
: Battery status
èpage 15 “When the battery
indicator does not light on”
èOperating Instructions -
Reference Manual “Battery
Power”
G: Wireless LAN Antenna / Blue-
tooth Antenna
<Only for model with wireless LAN>
<Only for model with Bluetooth>
èOperating Instructions - Ref-
erence Manual “Wireless LAN”
“Bluetooth”
H: Windows Button
èOperating Instructions - Ref-
erence Manual “Tablet Buttons”
Description of Parts
F
HG
ABD E
CA
Front side
Downloaded from ManualsNet.com search engine

5
Getting Started
A: Microphone
B: Volume Button
èOperating Instructions - Ref-
erence Manual “Tablet Buttons”
C: Power Switch
D: Rotation Lock Button
èOperating Instructions - Ref-
erence Manual “Display Rota-
tion”
E: A Button
èOperating Instructions - Ref-
erence Manual “Tablet Buttons”
F: DC-IN Jack
G: Headset Jack
A headset or headphone can be
connected.
H: USB3.0 Port
èOperating Instructions - Ref-
erence Manual “USB Devices”
I: Security Lock
A Kensington cable can be con-
nected.
For further information, read the
manual that comes with the cable.
J: Expansion Bus Connector
èOperating Instructions - Ref-
erence Manual “Cradle”
K: External Antenna Connector
<Only for model with wireless
WAN>
F
G
H
Left side Right side
EDCBA
I
JK
Top
Bottom
Downloaded from ManualsNet.com search engine

6
Getting Started
Description of Parts
Rear Camera
èOperating Instructions - Ref-
erence Manual “Camera”
A: Camera Lens
B: Camera Light
C: Camera Indicator
D: Speaker
E: Battery Indicator
<Only for model with Built-in Bridge Battery>
F: Battery Latch
èOperating Instructions - Ref-
erence Manual “Battery Power”
G: Battery Pack
H: microSIM Card Slot
<Only for model with wireless WAN>
èOperating Instructions - Ref-
erence Manual “Wireless WAN”
I: microSD Memory Card Slot
è
Operating Instructions - Reference
Manual “microSD Memory Card”
J: Barcode Reader / LAN Port
<Only for model with Barcode Reader>
è
Operating Instructions - Refer-
ence Manual
“Barcode Reader”
<Only for model with LAN Port>
èOperating Instructions - Ref-
erence Manual “LAN”
K: Built-in Bridge Battery
<Only for model with Built-in Bridge
Battery>
L: Smart Card Reader / Magnetic
Stripe Card Reader / Contactless
Smart Card Reader
<Only for model with Smart Card Reader>
è
Operating Instructions - Refer-
ence Manual “Smart Card”
<Only for model with Magnetic
Stripe Card Reader>
è
Operating Instructions - Reference
Manual “Magnetic Stripe Card Reader”
<Only for model with Contactless
Smart Card Reader>
èOperating Instructions - Ref-
erence Manual “Contactless
Smart Card Reader”
A
B
C
D
E
F
G
HH
I
I
Rear side
J
K
JL
K
Top (optional)
Downloaded from ManualsNet.com search engine

7
Getting Started
nPreparation
ACheck and identify the supplied accessories.
Ifyoudonotndthedescribedaccessories,contactPanasonicTechnical
Support (èpage 42).
• AC Adaptor...... 1
Model No: CF-AA6373A
• AC Cord ........ 1 • Battery Pack . . . . . 1
Model No: FZ-VZSU94W
• Soft Cloth .............................................1
• Stylus*1 ...............................................1
• Tether*1 ...............................................1
• Hand Strap*1 ...........................................1
• OPERATING INSTRUCTIONS - Read Me First ...............1
*1 Not included with some models.
BRead the LIMITED USE LICENSE AGREEMENT before breaking the seal
on the computer’s packaging (èpage 29).
First-time Operation
1 Inserting the Battery Pack.
Turn over the computer and insert the battery pack
until it touch to the secured position.
l
Make sure no foreign objects are under the computer.
CAUTION
lMake sure the latch is securely locked. Otherwise the
battery pack may fall when you carry the computer.
lDo not touch the terminals of the battery pack and the
computer. Doing so can make the terminals dirty or
damaged, and may cause malfunction of the battery
pack and the computer.
1
㪉
㪈
Downloaded from ManualsNet.com search engine

8
Getting Started
First-time Operation
NOTE
l
Note that the computer consumes electricity even when the
computer power is off. If the battery pack is fully charged,
the battery will fully discharge in the following period of time:
Status FZ-VZSU94W FZ-VZSU95W
(optional)
When power is off Approx. 7 weeks Approx. 17 weeks
In sleep*2 Approx. 9 days Approx. 20 days
In hibernation Approx. 7 weeks Approx. 17 weeks
*2 <Only for model with LAN>
If “Wake Up from wired LAN” is enabled, the period
of time will be shorter.
2 Connect your computer to a power out-
let.
The battery charging starts automatically.
CAUTION
l DonotdisconnecttheACadaptoruntiltherst-time
operation procedure is completed.
l Whenusingthecomputerforthersttime,donotcon-
nect any peripheral device (including wired LAN cable)
except the battery pack and AC adaptor.
lHandling the AC adaptor

Problems such as sudden voltage drops may arise dur-
ing periods of thunder and lightning. Since this could
adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless
running from the battery pack alone.
3 Turn on the computer.
Press and hold the power switch (A) (longer than 2
seconds) until the power indicator (B) lights.
CAUTION
lDo not press the power switch repeatedly or do not
hold the power switch for ten seconds or longer.
lAny changes from the default setting of the Setup Util-
ity must not be made until the First-time Operation is
completed.
㪈
㪉
2
3
B
A
Downloaded from ManualsNet.com search engine

9
Getting Started
4 Setup Windows.
<For MUI OS model>
Select language and touch [Next].
Follow the on-screen instructions.
lThe computer restarts several times. Do not touch
the screen or tablet buttons, and wait until the drive
indicator has turned off.
lAfter the computer is turned on, the screen remains
black or unchanged for a while, but this is not a
malfunction. Wait for a moment until the Windows
setup screen appears.
lSetup of Windows will take approximately 5 min-
utes.
Gotothenextstep,conrmingeachmessageon
the display.
lYou can set the Wireless Network after the setup of
Windows is complete.
If “Let’s get connected” is displayed, you can select
“Skip this step”.
CAUTION
lYou can change the user name, password, image and
security setting after setup of Windows.
lRemember your password. If you forget the password,
you cannot use Windows. Creating a password reset
disk beforehand is recommended.
lDo not use the following words for user name: CON,
PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to
LPT9, LPT, &, space.
5 Restart the computer
ATouch (Start).
BTouch (Power) - [Restart].
lA portion of the Panasonic PC Settings Utility func-
tions will be enabled after the computer restarts.
Downloaded from ManualsNet.com search engine

10
Getting Started
First-time Operation
6 Update the on-screen manual
AConnect to the internet. Sign in to Windows as an
administrator.
For further information, refer to Connect to a
network.
BUpdate the on-screen manual.
Double-touch the [Panasonic PC Settings Utility]
on the desktop screen, and then touch [Support] -
[Manual] - [Launch Manual Selector].
7 <For MUI OS model>
Deleting language packs.
Language Pack Cleanup Utility deletes the unused
languagepackfromtheashmemorydrive.
Deleting such language packs will shorten the post-
processing time.
Perform this utility before running the following functions.
Backup
Create a Recovery drive
Refresh
NOTE
lDo not disconnect the AC adaptor until this utility has
beennished.
lNo need to perform this utility more than twice.
ALog on to Windows as an administrator.
BTouch (Start) - (All apps) - [Panasonic] -
[Language Pack Cleanup Utility].
If [User Account Control] is displayed, touch [Yes].
CAttheconrmationmessage,touch[Yes]- [OK].
This utility requires several hours to perform, and
restarts more than 10 times while performing.
DIf “Completed” is displayed, touch [OK].
8 Create a recovery drive.
A recovery drive allows you to install OS and restore
its factory default condition, in case, for example, the
recoverypartitionoftheashmemoryisdamaged.
We recommend creating a recovery drive before you
begin using the computer.
Refer to è
Operating Instructions - Reference Manual “Re-
covery Disc Creation Utility” about creating the recovery drive.
Downloaded from ManualsNet.com search engine

11
Getting Started
NOTE
lPanasonic PC Settings Utility
You can check the status of the computer, and change the settings. Double-
touch [Panasonic PC Settings Utility] on the desktop to start the utility.
(èOperating Instructions - Reference Manual “Panasonic PC Settings
Utility”)
lPC Information Viewer
 Thiscomputerperiodicallyrecordsthemanagementinformationoftheash
memory, etc. The maximum data volume for each record is 1024 bytes.
Thisinformationisonlyusedforestimatingthecausewhentheashmemory
goes down by any possibility. They are never sent to outside via network nor
used for any other purpose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save
function for management information history] in [Hard Disk Status] of PC Infor-
mation Viewer, and touch [OK]. Then follow the on-screen instructions.
(èOperating Instructions - Reference Manual “Troubleshooting (Ad-
vanced)” “Checking the Computer’s Usage Status”)
l<For MUI OS model>
In the default settings, a shortcut icon for Korean language is on the Desktop
screen. You may delete the icon if not necessary.
nBefore using wireless function
ATouch (Action center) at the task tray, and then touch (All settings) -
[Network & Internet] - [Airplanemode].
Set [Airplane mode] to [Off], and then;
set [Wi-Fi] to [On] (for wireless LAN).
set [Mobile broadband] to [On] (for wireless WAN).
set [GPS] to [On] (for wireless WAN).
set [Bluetooth] to [On] (for Bluetooth).
set [GPS\GNSS] to [On] (for GPS).
CAUTION
lDo not add or delete partitions in Windows 10, as the Windows area and re-
covery partition must be adjacent to each other in Windows 10.
Downloaded from ManualsNet.com search engine

12
Getting Started
Turning On
Press the power switch (èpage 5) until the power indicator (èpage 4)
lights.
NOTE
lDo not press the power switch repeatedly.
lThe computer will forcibly be turned off if you press the power switch for ten
seconds or longer.
lOnce you turn off the computer, wait for ten seconds or more before you turn
on the computer again.
l
Do not perform the following operation until the drive indicator turns off.
Connecting or disconnecting the AC adaptor
Pressing the power switch

Touching tablet buttons, screen or external mouse
Turning Off
AShut down the computer.
1. Touch (Start) at the lower left.
2. Touch (Power) - [Shutdown].
NOTE
lTo turn off the computer completely, proceed as follows.
ATouch (Start) at the lower left, and the touch (Settings) - [Update &
security] - [recovery].
BTouch [Restart now] under “Advanced startup”.
CTouch [Turn off your PC].
Turning On / Turning Off
Downloaded from ManualsNet.com search engine

13
Getting Started
Precaution against Starting Up/Shutting Down
lDo not do the following
Connecting or disconnecting the AC adaptor
Pressing the power switch
Touching tablet buttons, screen or external mouse
NOTE
lTo conserve power, the following power saving methods are set at the time of
purchase.
The screen automatically turns off after :
10 minutes (when AC adaptor is connected) of inactivity
4 minutes (when operating on battery power) of inactivity
The computer automatically enters sleep*1 after :
10 minutes (when AC adaptor is connected) of inactivity
4 minutes (when operating on battery power) of inactivity
*1 Refer to Operating Instructions - Reference Manual “Modern Standby /
Sleep / Hibernation Functions” about resuming from sleep.
Downloaded from ManualsNet.com search engine

14
Useful Information
Handling and Maintenance
Operation environment
l
Placethecomputeronaatstablesurfacenotsubjecttoshock,vibration,and
danger of dropping. Do not place the computer upright or turn it over. If the
computer is exposed to an extremely strong impact, it may become damaged.
lOperating environment
Temperature: Operation : -10 °C to 50 °C {14 °F to 122 °F} (IEC60068-2-1, 2)*1
Storage : -20 °C to 60 °C {-4 °F to 140 °F}
Humidity: Operation : 30%to 80%RH (No condensation)
Storage : 30%to 90%RH (No condensation)
Even within the above temperature/humidity ranges, operation for a long time
in extreme environments, smoking nearby, or operation in places where oil is
used or where there is a lot of dust will result in the product deterioration and
will shorten the product life.
*1 Do not expose the skin to this product when using the product in a hot or cold
environment. (èOperating Instructions - Read Me First “Safety Precautions”)
If the computer is wet in temperatures of 0 °C {32 °F} or below, freeze damage
may occur. Make sure to dry off the computer in such temperatures.
lDo not place the computer in the following areas, otherwise the computer may
be damaged.
Near electronic equipment. Image distortion or noise may occur.
In extremely high or low temperature.
lAs the computer can become hot during operation, keep it away from items
that are sensitive to heat.
l<Only for model with Built-in Bridge Battery>
Do not put sources of strong magnetism such as magnet close to the comput-
er. Malfunction may occur.
Handling cautions
This computer is designed to minimize shock to parts such as the LCD and the
ashmemorydrive,butnowarrantyisprovidedagainstanytroublecausedby
shock. Be extremely careful when handling the computer.
lWhen carrying the computer:
Turn off the computer.
Remove all external devices, cables, Smart Cards and other protruding ob-
jects.
Do not drop or hit the computer against solid objects.
Do not grip the display part.
lWhen you board an airplane, take the computer with you and never put it in
your checked luggage. When using the computer on airplane, follow the air-
line’s instructions.
lWhen carrying a spare battery, put it in a plastic bag to protect its terminals.
Downloaded from ManualsNet.com search engine

15
Useful Information
lThe touchscreenisdesignedtobeusedbyangertip.Donotplaceanyobject
on its surface and do not press down strongly with sharp-pointed or hard ob-
jects that may leave marks (e.g., nails, pencils and ball point pens).
lAvoid any harmful substances such as oil from getting into the touchscreen.
The pointer may not work correctly.
lBe careful not to get injured by dropping or getting hit when carrying the com-
puter.
lUse only the dedicated pen (optional) to touch the screen. Do not place any
object on its surface and do not press down strongly with sharp-pointed or hard
objects that may leave marks (e.g., nails, pencils and ball point pens).
lDo not use the screen when dust or dirt (e.g., oil) is on the screen. Otherwise
foreign particles on the screen/dedicated pen (optional) can scratch the screen
surface or obstruct the dedicated pen (optional) operation.
lUse the dedicated pen (optional) only for touching the screen. Using it for any
other purpose may damage the dedicated pen (optional) and result in scratch-
es on the screen.
nWhen the battery indicator does not light on
The battery indicator may not light on even if the AC adaptor and the battery pack
are correctly connected to the computer, due to the following reasons.
lThe AC adaptor’s protection function may be working. In this case, pull out the
AC cord and wait for more than 1 minute before reconnecting the AC cord.
nWhen using peripheral devices
Follow these instructions and the Operating Instructions - Reference Manual to
avoid any damage to the devices. Carefully read the instruction manuals of the
peripheral devices.
l Usetheperipheraldevicesconformingtothecomputer’sspecications.
lConnect to the connectors in the correct direction.
lIf it is hard to insert, do not try forcibly but check the connector’s shape, direc-
tion, alignment of pins, etc.
lIf screws are included, fasten them securely.
lRemove the cables when you carry the computer. Do not pull the cables forc-
ibly.
Downloaded from ManualsNet.com search engine

16
Useful Information
Handling and Maintenance
nPreventing your computer from unauthorized use via wireless LAN/Blue-
tooth/Wireless WAN
<Only for model with wireless LAN/Bluetooth/Wireless WAN>
l
Before using wireless LAN/Bluetooth/Wireless WAN, make the appropriate se-
curity settings such as data encryption.
nBattery Recalibration
lThe battery recalibration may take a long time due to the large battery capac-
ity. This is not a malfunction.
<When performing “Battery Recalibration” after shutting down Windows>
Full charge: Approximately 4.0 hours (with FZ-VZSU94W) / Approximately
7.0 hours (with FZ-VZSU95W (optional))

Complete discharge: Approximately 5.0 hours (with FZ-VZSU94W) / Approxi-
mately 12.0 hours (with FZ-VZSU95W (optional))
When performing “Battery Recalibration” without shutting down Windows, it may
take more time to charge / discharge.
nSensors
This computer is equipped with four sensors (acceleration sensor, gyro sensor,
magnetic sensor, ambient light sensor), and you can use these sensors with any
software that is compatible.
As the accuracy of each sensor output is dependent on the operating environment
and other conditions, the results should only be used as a reference.
The acceleration sensor, gyro sensor, and magnetic sensor are located at the bot-
tom left of the LCD. The detection results of each sensor may vary depending on
the display mode, how you are holding the computer, the application software you
are using, and other factors.
lAutomatic brightness adjustment
The computer is equipped with an automatic brightness adjustment function
that adjusts the display screen based on the ambient light sensor. You can
conguretheautomaticadjustmentfunctionasfollows.
A Touch (Start) at the lower left, and then touch (Settings) - [System] -
[Display].
B Set [Change brightness automatically when lighting changes] to [On].
The ambient light sensor is located at the top of LCD.
The ambient light cannot be detected properly if this area is obstructed or dirty.
Downloaded from ManualsNet.com search engine

17
Useful Information
lMagnetic sensor
The magnetic sensor on the computer operates by detecting geomagnetism.
Therefore, the magnetic sensor may not function properly and it readings may
be inaccurate, especially in the following environments.
Inside or near steel structures such as buildings or bridges
Inside or near automobiles, or near train power lines
Near metallic furniture or appliances
When the AC adaptor or other peripheral devices are brought closer to the
computer
Nearmagnets,speakers,orotherobjectswithstrongmagneticelds
The magnetic directions indicated by the magnetic sensor may not be accurate
immediatelyafterpurchaseorinenvironmentswithpoormagneticelds.
In such cases, turn on the computer and move it as follows.
A Hold the computer so that its display side is facing the ground and level.
B While keeping the computer level, rotate it 90 degrees or more clockwise.
C Return the computer to position A, and rotate it 90 degrees or more coun-
terclockwise.
D Return the computer to position A.
E Tilt the computer 90 degrees or more to the left so that the left side of the
computer tilts down.
F Return the computer to position A, and tilt it 90 degrees or more to the right
so that the right side of the computer tilts down.
CAUTION
●Holdthecomputerrmlywhenmovingit.Strongshocksfromdroppingthe
computer may result in damage.
lTether for Stylus (Optional)
When using the stylus with tether (optional), do not pull the tether with exces-
sive force. The dedicated pen (optional) may hit the computer, person’s body
or other objects when released.
Downloaded from ManualsNet.com search engine

18
Useful Information
Handling and Maintenance
Maintenance
If drops of water or other stains get on the surface of the LCD panel, wipe them off
immediately. Failure to do so may result in staining.
To clean the LCD panel
Use the soft cloth. (For further information, refer to “Suggestions About Cleaning
the LCD Surface” èOperating Instructions - Reference Manual “Screen Input
Operation”.)
To clean areas other than the LCD panel
Wipe with a soft dry cloth such as gauze. When using detergent, dip a soft cloth in
water-diluted detergent and wring it thoroughly.
CAUTION
lDo not use benzene, thinner, or rubbing alcohol since it may adversely af-
fect the surface causing discoloration, etc. Do not use commercially-available
household cleaners and cosmetics, as they may contain components harmful
to the surface.
lDo not apply water or detergent directly to the computer, since liquid may enter
inside of the computer and cause malfunction or damage.
l
Use a soft, dry cloth to wipe droplets of water from the surface of the unit. Do not
use a microwave to dry the unit. Doing so will result in malfunction or damage.
Dispose of Computer
<Only for model with Built-in Bridge Battery>
<For Europe and U.S.A./Canada>
Attention Customers
Don't remove the battery by yourself. The battery must be removed by quali-
edprofessionals.
Whendisposingofthisproduct,besuretocontactqualied
professionals to remove the battery.
Downloaded from ManualsNet.com search engine

19
Useful Information
Attention Qualied professionals to remove the battery
Dispose of this product correctly in accordance with the local regulations after
removing the battery as shown in the following procedure.
nPreparation
lRemove all peripherals (microSD memory card, etc.).
l
Erase the stored data. (èOperating Instructions - Reference Manual “Eras-
ing Flash Memory Data”)
CAUTION
lNever disassemble the computer except before disposal.
lRefer to Operating Instructions - Read Me First “Safety Precautions” for
precautions when disposing of the computer.
1. Turn off the computer, and disconnect the AC adaptor.
2. Turn over the computer, remove the battery pack, and wait for about 3 min-
utes.
3. Remove the screws and the cover (A).
A
4. Pull out all cables from the connector on the cover side.
Downloaded from ManualsNet.com search engine

20
Useful Information
Handling and Maintenance
5. Dispose of the battery with the cover attached correctly in accordance with
the local regulation.
Downloaded from ManualsNet.com search engine