Panasonic Lumix DMC-FX700 User manual

Basic Operating Instructions
Digital Camera
Model No. DMC-FX700
Before use, please read these instructions completely.
Please also refer to the Operating
Instructions (PDF format)
contained on the CD-ROM
(supplied).
You can learn about advanced operation methods
and check the Troubleshooting.
EB
Web Site: http://www.panasonic-europe.com
VQT2X94
Model number suffix “EB” denotes UK model.
until
2010/8/5
DMC-FX700EB-VQT2X94_eng.book 1 ページ ２０１０年７月１２日 月曜日 午後９時５６分

VQT2X94 (ENG)
2
Dear Customer,
We would like to take this opportunity to thank you for purchasing this Panasonic
Digital Camera. Please read these Operating Instructions carefully and keep them
handy for future reference. Please note that the actual controls and components,
menu items, etc. of your Digital Camera may look somewhat different from those
shown in the illustrations in these Operating Instructions.
Carefully observe copyright laws.
•Recording of pre-recorded tapes or discs or other published or broadcast
material for purposes other than your own private use may infringe copyright
laws. Even for the purpose of private use, recording of certain material may be
restricted.
Information for Your Safety
∫Product identification marking
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT
DAMAGE,
•DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING
OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH
AS VASES, SHALL BE PLACED ON THE APPARATUS.
•USE ONLY THE RECOMMENDED ACCESSORIES.
•DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THE SOCKET OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
Product Location
Digital camera Bottom
Battery charger Bottom
DMC-FX700EB-VQT2X94_eng.book 2 ページ ２０１０年７月１２日 月曜日 午後９時５６分

3
(ENG) VQT2X94
Caution for AC mains lead
For your safety, please read the following
text carefully.
This appliance is supplied with a moulded
three pin mains plug for your safety and
convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced
please ensure that the replacement fuse
has a rating of 5-ampere and that it is
approved by ASTA or BSI to BS1362.
Check for the ASTA mark or the BSI
mark on the body of the fuse.
If the plug contains a removable fuse
cover you must ensure that it is refitted
when the fuse is replaced.
If you lose the fuse cover the plug must
not be used until a replacement cover is
obtained.
A replacement fuse cover can be
purchased from your local dealer.
CAUTION!
IF THE FITTED MOULDED PLUG IS
UNSUITABLE FOR THE SOCKET
OUTLET IN YOUR HOME THEN THE
FUSE SHOULD BE REMOVED AND
THE PLUG CUT OFF AND DISPOSED
OF SAFELY.
THERE IS A DANGER OF SEVERE
ELECTRICAL SHOCK IF THE CUT OFF
PLUG IS INSERTED INTO ANY 13-
AMPERE SOCKET.
If a new plug is to be fitted please
observe the wiring code as stated below.
If in any doubt please consult a qualified
electrician.
IMPORTANT
The wires in this mains lead are coloured
in accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with
the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured Blue must be
connected to the terminal which is marked
with the letter N or coloured Black or Blue.
The wire which is coloured Brown must be
connected to the terminal which is marked
with the letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER
WIRE TO THE EARTH TERMINAL
WHICH IS MARKED WITH THE LETTER
E, BY THE EARTH SYMBOL OR
COLOURED GREEN OR
GREEN/YELLOW.
THIS PLUG IS NOT WATERPROOF-
KEEP DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to
the type of AC mains plug (figures A and
B). Confirm the AC mains plug fitted and
follow the instructions below.
Illustrations may differ from actual AC
mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach
the fuse cover.
Fuse cover
Figure A Figure B
Figure A Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
DMC-FX700EB-VQT2X94_eng.book 3 ページ ２０１０年７月１２日 月曜日 午後９時５６分

VQT2X94 (ENG)
4
∫About the battery pack
•Do not heat or expose to flame.
•Do not leave the battery(ies) in an automobile exposed to direct sunlight for a
long period of time with doors and windows closed.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Dispose of used
batteries according to the manufacturer’s instructions.
Warning
Risk of fire, explosion and burns. Do not disassemble, heat above 60 xC or
incinerate.
DMC-FX700EB-VQT2X94_eng.book 4 ページ ２０１０年７月１２日 月曜日 午後９時５６分

5
(ENG) VQT2X94
∫About the battery charger
•The battery charger is in the standby condition when the AC power supply cord
is connected. The primary circuit is always “live” as long as the power cord is
connected to an electrical outlet.
∫Cautions for Use
•Do not use any other AV cables except the supplied one.
•Always use a genuine Panasonic HDMI mini cable (RP-CDHM15, RP-CDHM30;
optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
•Do not use any other USB connection cables except the supplied one.
Keep this unit as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).
•If you use this unit on top of or near a TV, the pictures and/or sound on this unit
may be disrupted by electromagnetic wave radiation.
•Do not use this unit near cell phones because doing so may result in noise
adversely affecting the pictures and/or sound.
•Recorded data may be damaged, or pictures may be distorted, by strong
magnetic fields created by speakers or large motors.
•Electromagnetic wave radiation generated by microprocessors may adversely
affect this unit, disturbing the pictures and/or sound.
•If this unit is adversely affected by electromagnetic equipment and stops
functioning properly, turn this unit off and remove the battery or disconnect AC
adaptor (DMW-AC5E; optional). Then reinsert the battery or reconnect AC
adaptor and turn this unit on.
Do not use this unit near radio transmitters or high-voltage lines.
•If you record near radio transmitters or high-voltage lines, the recorded pictures
and/or sound may be adversely affected.
CAUTION!
•DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS
WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE
HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY
OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
•DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
•DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED
CANDLES, ON THE UNIT.
•DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY
MANNER.
DMC-FX700EB-VQT2X94_eng.book 5 ページ ２０１０年７月１２日 月曜日 午後９時５６分

VQT2X94 (ENG)
6
Information for Users on Collection and Disposal of Old Equipment and
used Batteries
These symbols on the products, packaging, and/or
accompanying documents mean that used electrical and
electronic products and batteries should not be mixed with
general household waste.
For proper treatment, recovery and recycling of old products
and used batteries, please take them to applicable collection
points, in accordance with your national legislation and the
Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will
help to save valuable resources and prevent any potential
negative effects on human health and the environment which
could otherwise arise from inappropriate waste handling.
For more information about collection and recycling of old
products and batteries, please contact your local municipality,
your waste disposal service or the point of sale where you
purchased the items.
Penalties may be applicable for incorrect disposal of this waste,
in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the
European Union]
These symbols are only valid in the European Union. If you
wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical
symbol. In this case it complies with the requirement set by the
Directive for the chemical involved.
Cd
DMC-FX700EB-VQT2X94_eng.book 6 ページ ２０１０年７月１２日 月曜日 午後９時５６分

7
(ENG) VQT2X94
Contents
Information for Your Safety ........................................................................... 2
Accessories................................................................................................... 8
Names of the Components ......................................................................... 10
How to Use the Touch Panel ...................................................................... 12
Charging the Battery ................................................................................... 14
About the Built-in Memory/the Card ............................................................ 16
Inserting and Removing the Card (optional)/the Battery ............................. 17
Setting Date/Time (Clock Set)..................................................................... 18
• Changing the Clock Setting .................................................................. 18
Setting the Menu ......................................................................................... 19
Selecting the [REC] Mode........................................................................... 20
Taking Pictures Using the Automatic Function
(ñ: Intelligent Auto Mode) .......................................................................... 21
• Scene Detection.................................................................................... 22
• AF Tracking Function............................................................................ 22
Taking Pictures with Your Favourite Settings
(³: Programme AE Mode) ......................................................................... 23
Compensating the Exposure....................................................................... 24
Taking Pictures with Set Aperture (±: Aperture-priority AE) ...................... 25
Taking Pictures with Set Shutter Speed (´: Shutter-priority AE) ............... 26
Taking Pictures with Exposure Set Manually (²: Manual exposure) ......... 27
Taking Pictures using Burst Mode .............................................................. 28
Recording Motion Pictures.......................................................................... 29
Playing Back Pictures ([NORMAL PLAY]) .................................................. 30
Deleting Pictures ......................................................................................... 30
Reading the Operating Instructions (PDF format)....................................... 31
Specifications.............................................................................................. 33
DMC-FX700EB-VQT2X94_eng.book 7 ページ ２０１０年７月１２日 月曜日 午後９時５６分

VQT2X94 (ENG)
8
Accessories
Check that all the accessories are supplied before using the camera.
Product numbers correct as of July 2010. These may be subject to change.
1 Battery Pack
(Indicated as battery pack or
battery in the text)
Charge the battery before use.
2 Battery Charger
(Indicated as battery charger or
charger in the text)
3 AC Mains Lead
4 USB Connection Cable
5AVCable
6 CD-ROM
•Software:
Use it to install the software to your
PC.
•Operating Instructions
7 Hand Strap
8 Battery Case
9 Stylus Pen
•SD Memory Card, SDHC Memory Card
and SDXC Memory Card are indicated
as card in the text.
•The card is optional.
You can record or play back pictures
on the built-in memory when you are
not using a card.
•Consult the dealer or your nearest
Service Centre if you lose the supplied
accessories. (You can purchase the
accessories separately.)
3
12
4
56
78
DMW-BCF10E
K2CT39A00002
VFC4297
DE-A60A
VGQ0D56
K1HA08AD0002
K1HA08CD0028 VFF0688
VGQ0C14
9
DMC-FX700EB-VQT2X94_eng.book 8 ページ ２０１０年７月１２日 月曜日 午後９時５６分

9
(ENG) VQT2X94
Sales and Support Information
Customer Care Centre
•For customers within the UK: 0844 844 3852
•For customers within the Republic of Ireland: 01 289 8333
•Visit our website for product information
www.panasonic.co.uk.
•E-mail: [e-mail]
Technical Support for AV Software
•For customers within the UK: 0844 844 3869
•For customers within the Republic of Ireland: 01 289 8333
Direct Sales at Panasonic UK
•For customers: 0844 844 3856
• Order accessory and consumable items for your product with ease and confidence
by phoning our Customer Care Centre Monday – Thursday 9.00 a.m. – 5.30 p.m.,
Friday 9.30 a.m. – 5.30 p.m. (Excluding public holidays)
•Or go on line through our Internet Accessory ordering application at
www.pas-europe.com.
•Most major credit and debit cards accepted.
•All enquiries transactions and distribution facilities are provided directly by
Panasonic UK Ltd.
•It couldn’t be simpler!
•Also available through our Internet is direct shopping for a wide range of finished
products, take a browse on our website for further details.
∫Optional Accessories
•SDXC Memory Card
64 GB: RP-SDW64GE1K
48 GB: RP-SDW48GE1K
•SDHC Memory Card
32 GB: RP-SDW32GE1K/RP-SDP32GE1K
24 GB: RP-SDP24GE1K
16 GB: RP-SDW16GE1K/RP-SDP16GE1K
8 GB: RP-SDW08GE1K/RP-SDP08GE1K/RP-SDR08GE1A
4 GB: RP-SDW04GE1K/RP-SDP04GE1K/RP-SDR04GE1A
•SD Memory Card
2 GB: RP-SDP02GE1K/RP-SDR02GE1A
¢The AC Adaptor (optional) can only be used with the designated Panasonic
DC Coupler (optional). The AC adaptor (optional) cannot be used by itself.
Some optional accessories may not be available in some countries.
•Battery Pack
DMW-BCF10E
•AC Adaptor¢
DMW-AC5EB
•HDMI mini cable:
RP-CDHM15E/RP-CDHM30E
•DC Coupler¢
DMW-DCC4E
DMC-FX700EB-VQT2X94_eng.book 9 ページ ２０１０年７月１２日 月曜日 午後９時５６分

VQT2X94 (ENG)
10
Names of the Components
1Flash
2Lens
3 Self-timer indicator
AF Assist Lamp
4 Hand strap eyelet
•Be sure to attach the hand strap
when using the camera to ensure
that you will not drop it.
5 Touch panel/LCD monitor
6 [REC]/[PLAYBACK] selector switch
7 [MODE] button
8 [MENU] button
9 Speaker
10 Camera ON/OFF switch
11 Zoom lever
12 Motion picture button
13 Microphone
14 Shutter button
123

4
78
65
11 12
14
13
10
9
DMC-FX700EB-VQT2X94_eng.book 10 ページ ２０１０年７月１２日 月曜日 午後９時５６分

11
(ENG) VQT2X94
15 Lens barrel
16 [HDMI] socket
17 [AV OUT/DIGITAL] socket
18 Tripod receptacle
•When you use a tripod, make sure the
tripod is stable when the camera is
attached to it.
19 Card/Battery door
20 Release lever
21 DC coupler cover
•When using an AC adaptor, ensure that
the Panasonic DC coupler (DMW-DCC4;
optional) and AC adaptor (DMW-AC5E;
optional) are used.
•Always use a genuine Panasonic AC
adaptor (DMW-AC5E; optional).
•When using an AC adaptor, use the AC
cable supplied with the AC adaptor.
•We recommend you use a battery with
sufficient battery power or the AC
adaptor when recording motion pictures.
•If while recording motion pictures using
the AC adaptor and the power supply is
cut off due to a power outage or if the AC
adaptor is disconnected etc., the motion
picture being recorded will not be
recorded.
1
6
1
7
1
5
18 19
2021
DMC-FX700EB-VQT2X94_eng.book 11 ページ ２０１０年７月１２日 月曜日 午後９時５６分

VQT2X94 (ENG)
12
How to Use the Touch Panel
This touch panel is a type that detects pressure.
Operation or settings are performed by directly touching the icons displayed on
the LCD monitor (touch panel) or by moving while touching the touch panel
(dragging) using your fingers or the supplied stylus pen.
Touch the screen
To touch and release the touch panel.
Drag
A movement without releasing the
touch panel.
Use this to perform tasks such as
selecting icons or images displayed on
the touch panel.
You can make settings by touching the
items displayed on the screen.
You can exit without saving the settings
by touching [CANCEL].
•It may not operate properly when
multiple icons are touched
simultaneously, so try to touch the
centre of the icon.
This is used when performing tasks
such as moving to the next image by
dragging horizontally, or changing the
range of the displayed image.
This can also be used to perform
tasks such as switching the screen
by operating the slide bar.
•If you select wrong icon, you can
drag to different icon, and select
that icon by releasing your finger.
DMC-FX700EB-VQT2X94_eng.book 12 ページ ２０１０年７月１２日 月曜日 午後９時５６分

13
(ENG) VQT2X94
Note
•The touch panel does not operate when the LCD
monitor is turned off.
•If you use a commercially available liquid crystal
protection sheet, please follow the instructions that
accompany the sheet. (Some liquid crystal
protection sheets may impair visibility or
operability.)
•Apply a little extra pressure when touching if you
have a commercially available protection sheet affixed or if you feel it is not
responding well.
•Touch panel will not operate properly when the hand holding this unit is pressing
on the touch panel.
•Do not press using anything with a sharp tip or anything hard, except for the
supplied stylus pen.
•Do not operate with your fingernails.
•Wipe the LCD monitor with dry soft cloth when it gets dirty with finger prints and
others.
•Do not scratch or press the LCD monitor too hard.
∫About the Stylus pen
It is easier to use the stylus pen (supplied) for
detailed operation or if it is hard to operate with your
fingers.
•Do not place it where small children can reach.
•Do not place the stylus pen on the LCD monitor
when storing. LCD monitor may break when the
stylus pen is pressed strongly against the LCD
monitor.
DMC-FX700EB-VQT2X94_eng.book 13 ページ ２０１０年７月１２日 月曜日 午後９時５６分

VQT2X94 (ENG)
14
Charging the Battery
∫About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCF10E.
•Use the dedicated charger and battery.
•The camera has a function for distinguishing batteries which can be used
safely. The dedicated battery (DMW-BCF10E) supports this function. The
only batteries suitable for use with this unit are genuine Panasonic
products and batteries manufactured by other companies and certified by
Panasonic. (Batteries which do not support this function cannot be used).
Panasonic cannot in any way guarantee the quality, performance or safety
of batteries which have been manufactured by other companies and are
not genuine Panasonic products.
∫Charging
•The battery is not charged when the camera is shipped. Charge the battery
before use.
•Charge the battery with the charger indoors.
•It is recommended to charge the battery in a temperature between 10 oC to
30 oC (50 oF to 86 oF). (The battery temperature should also be the same.)
It has been found that counterfeit battery packs which look very similar
to the genuine product are made available to purchase in some markets.
Some of these battery packs are not adequately protected with internal
protection to meet the requirements of appropriate safety standards.
There is a possibility that these battery packs may lead to fire or
explosion. Please be advised that we are not liable for any accident or
failure occurring as a result of use of a counterfeit battery pack. To
ensure that safe products are used we would recommend that a genuine
Panasonic battery pack is used.
Attach the battery paying
attention to the direction of the
battery.
DMC-FX700EB-VQT2X94_eng.book 14 ページ ２０１０年７月１２日 月曜日 午後９時５６分

15
(ENG) VQT2X94
∫About the [CHARGE] indicator
•When the [CHARGE] indicator flashes
–The battery temperature is too high or too low. It is recommended to charge
the battery again in an ambient temperature of between 10 oC to 30 oC (50 oF
to 86 oF).
–The terminals of the charger or the battery are dirty. In this case, wipe them
with a dry cloth.
∫Charging time
∫Approximate operating time and number of recordable pictures
Recording conditions by CIPA standard
•CIPA is an abbreviation of [Camera & Imaging Products Association].
•Programme AE Mode
•Temperature: 23 oC (73.4 oF)/Humidity: 50%RH when LCD monitor is on.
•Using a Panasonic SD Memory Card (32 MB).
•Using the supplied battery.
•Starting recording 30 seconds after the camera is turned on. (When the Optical
Image Stabilizer function is set to [AUTO].)
•Recording once every 30 seconds with full flash every second recording.
•Rotating the zoom lever from Tele to Wide or vice versa in every recording.
•Turning the camera off every 10 recordings and leaving it until the temperature
of the battery decreases.
Connect the AC mains lead.
•Disconnect the charger from the
electrical socket and detach the battery
after charging is completed.
The [CHARGE]
indicator turns on: The [CHARGE] indicator Ais turned on and charging
will start.
The [CHARGE]
indicator turns off: The [CHARGE] indicator Aof the charger will turn off
once the charging has completed without any problem.
Charging time Approx. 130 min
Number of recordable pictures Approx. 300 pictures
Recording time Approx. 150 min
Playback time Approx. 200 min
DMC-FX700EB-VQT2X94_eng.book 15 ページ ２０１０年７月１２日 月曜日 午後９時５６分

VQT2X94 (ENG)
16
About the Built-in Memory/the Card
•Memory size: Approx. 40 MB
•The built-in memory can be used as a temporary storage device when the card
being used becomes full.
•The access time for the built-in memory may be longer than the access time for
a card.
The following cards which conform to the SD video standard can be used with this
unit.
(These cards are indicated as card in the text.)
•Only cards bearing the SDHC logo (indicating that the card conforms to SD
video standards) may be used as 4 GB to 32 GB cards.
•Only cards bearing the SDXC logo (indicating that the card conforms to SD
video standards) may be used as 48 GB, 64 GB cards.
•Use a card with SD Speed Class¢with “Class 4” or higher when recording
motion pictures in [AVCHD]. Also, use a card with SD Speed Class with
“Class 6” or higher when recording motion pictures in [MOTION JPEG].
¢SD Speed Class is the speed standard regarding continuous writing.
•Please confirm the latest information on the following website.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Note
•Keep the Memory Card out of reach of children to prevent swallowing.
Built-in Memory
Card
Type of card which can
be used with this unit Remarks
SD Memory Card (8 MB
to 2 GB)
•SDHC Memory Card can be used with SDHC
Memory Card or SDXC Memory Card compatible
equipment.
•SDXC Memory Card can only be used with SDXC
Memory Card compatible equipment.
•Check that the PC and other equipment are
compatible when using the SDXC Memory Cards.
http://panasonic.net/avc/sdcard/information/
SDXC.html
SDHC Memory Card
(4 GB to 32 GB)
SDXC Memory Card
(48 GB, 64 GB)
DMC-FX700EB-VQT2X94_eng.book 16 ページ ２０１０年７月１２日 月曜日 午後９時５６分

17
(ENG) VQT2X94
Inserting and Removing the Card
(optional)/the Battery
•Check that this unit is turned off.
•We recommend using a Panasonic card.
Slide the release lever in the
direction of the arrow and open
the card/battery door.
•Always use genuine Panasonic
batteries (DMW-BCF10E).
•If you use other batteries, we cannot
guarantee the quality of this product.
Battery: Insert until it is locked by
the lever Abeing careful about
the direction you insert it. Pull the
lever Ain the direction of the
arrow to remove the battery.
Card: Push it fully until it clicks
being careful about the direction
you insert it. To remove the card,
push the card until it clicks, then
pull the card out upright.
B: Do not touch the connection terminals of the card.
•The card may be damaged if it is not fully inserted.
1:Close the card/battery door.
2:Slide the release lever in the
direction of the arrow.
DMC-FX700EB-VQT2X94_eng.book 17 ページ ２０１０年７月１２日 月曜日 午後９時５６分

VQT2X94 (ENG)
18
Setting Date/Time (Clock Set)
•The clock is not set when the camera is shipped.
Touch [CLOCK SET].
Touch the items you wish to set (Year/
Month/Day/Hours/Minutes), and set
using [3]/[4].
•Touch [CANCEL] to cancel the date and time
settings without setting a date and time.
Touch [SET] to set.
Touch [SET].
•Touch [CANCEL] to return to the settings screen.
Select [CLOCK SET] in the [REC] or [SETUP] menu.
•It can be changed in steps 3and 4to set the clock.
Turn the camera on.
Changing the Clock Setting
DMC-FX700EB-VQT2X94_eng.book 18 ページ ２０１０年７月１２日 月曜日 午後９時５６分

19
(ENG) VQT2X94
Setting the Menu
This section describes how to select the Programme AE Mode settings, and the
same setting can be used for the [MOTION PICTURE] Mode menu, [PLAYBACK]
Mode menu and [SETUP] menu as well.
Example: Setting [AF MODE] from [Ø] to [š] in the Programme AE Mode
Press [MENU] to display the menu.
Touch [AF MODE].
Touch [š].
•Depending on the item, its setting may not
appear or it may be displayed in a different
way.
Touch [EXIT] to close the menu.
•You can also press the shutter button halfway
to close the menu.
Switching to other menus
e.g.: Switching to the [SETUP] menu
Touch the [SETUP] menu icon [ ].
•Select a menu item next and set it.
DMC-FX700EB-VQT2X94_eng.book 19 ページ ２０１０年７月１２日 月曜日 午後９時５６分

VQT2X94 (ENG)
20
Mode switching
Selecting the [REC] Mode
∫List of [REC] Modes
Turn the camera on.
A[REC]/[PLAYBACK] selector switch
B[MODE] button
Slide the [REC]/[PLAYBACK] selector
switch to [!], and then press
[MODE].
Touch the mode.
¦[INTELLIGENT AUTO]
The subjects are recorded using settings automatically selected by the
camera.
»[PROGRAM AE]
The subjects are recorded using your own settings.
¹[APERTURE PRIORITY]
The shutter speed is automatically determined by the aperture value you set.
¼[SHUTTER PRIORITY]
The aperture value is automatically determined by the shutter speed you set.
º[MANUAL EXPOSURE]
The exposure is adjusted by the aperture value and the shutter speed which
are manually adjusted.
Û[SCENE MODE]
This allows you to take pictures that match the scene being recorded.
DMC-FX700EB-VQT2X94_eng.book 20 ページ ２０１０年７月１２日 月曜日 午後９時５６分