Panasonic DMREA38V - DVD RECORDER - MULTI LANGUAGE User manual

RQCA1689 F1207SN0
If you have any
questions contact
Connection
Quick Setup Guide
Connecting to a TV and a Set Top Box
RF IN
RF
OUT
AC IN
COMPONENT VIDEO OUT
DVD/VHS COMMON OUT
DVD PRIORITY OUT
IN1
AUDIO IN
R L
VIDEO
IN
AUDIO OUT
R L
VIDEO
OUT




AV OUT
SET TOP BOX
CONTROL
RF IN/
SATELLITE IN

DVD Connection Guides (This is in English only) http://www.panasonic.com/consumer_electronics/dvd_recorder/dvd_connection.asp
1-800-211-7
PANA
262
Connecting with an HDMI (High Definition Multimedia Interface) Cable
HDMI IN
COMPONENT VIDEO OUT
DVD/VHS COMMON OUT
DVD PRIORITY OUT
IN1
AV OUT
SET TOP BOX
CONTROL
AUDIO IN
R L
INPUT 1
VIDEO
IN
What is VIERA Link “HDAVI Control”?
VIERA LinkTM is a new name for EZ SyncTM.
VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this unit, and a Panasonic TV
(VIERA) or receiver under “HDAVI Control”. You can use this function by connecting the equipment with the HDMI
cable.
For details on the benefits of “ HDAVI Control ”, please refer to pages 38 to 39 in the Operating Instructions.
VIERA LinkTM “HDAVI ControlTM”
Set “HDMI Priority” and “HDMI Audio Output” to “On” (The default setting is “On”.)
(  page 59, 60 in the operating instructions).

Connecting and positioning
the set top box control cable
The set top box control cable is
a device that allows this unit to
communicate with the set top box.
If you connect a set top box to this
unit, you also need to attach the
set top box control cable.
You can enjoy high-quality picture and audio by adding the HDMI cable connection between this unit and your TV (  left).
DMR-EA38V
• Before making any connections, turn off all equipment.
• For details on the benefits and limitations of different types of connections, please refer to pages 8 to 9, 63 to 65 in
the Operating Instructions.
Set top box
TV
(Included)
This unit
(Included)
When connected to an HDMI compatible unit, an uncompressed digital audio and video signal is transmitted, enabling
you to enjoy high quality, digital video and audio with just one cable. When connecting to an HDMI-compatible HDTV
(High Definition Television), the output can be switched to 1080p, 1080i or 720p HD video.
• Please use HIGH SPEED HDMI cables that have the HDMI logo (as shown on the cover of the operating instructions). It
is recommended that you use Panasonic’s HDMI cable.
• We recommend connecting to the TV with the DVD/VHS COMMON OUT terminals as well.
This unit
TV
(Included)
(the signal sensor)
Set top box
control cable
This unit
Set top box
(in front of, and as
near as possible to,
the signal sensor)
(Included)
Cable from the wall or
satellite antenna
EA38V.indd1-2EA38V.indd1-2 2007/12/2716:05:102007/12/2716:05:10

Initial Settings
Preparing the TV and the
set top box
1
Turn the TV and
the set top box on.
2
Select the video
input on your TV.
Activate the TV’s video
input which was connected
to this unit.
e.g. the TV/VIDEO or
INPUT button
• To return to the
previous screen
RETURN
3Turn this unit
on.
4Select the language.
5Select the type of TV you
are using.
• If you make a mistake, press [RETURN].
6Set Quick Start to “On”
or “Off”.
12
Select an item and
change the setting.
POWER
DVD/VHS
Select,
Set
OK
Select,
Set
OK
Select,
Set
OK
Select,
Next,
OK
POWER
POWER
SLOW/SEARCH
S
C
H
E
D
U
L
E
F
U
N
C
T
I
O
N
S
TV/VIDEO
PAU S ESTOP
3
2
1
6
54
9
8
7
0
REC MODE
RETURN
SUB MENU
CM SKIP
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
DISPLAYAUDIO
REC
DRIVE
SELECT
F Rec
STATUS
CHAPTER
CREATE
INPUT SELECT
CANCEL
DELETE
CH
CH
PLAY
VOL
SETUP
SKIP/ INDEX REW FF
TRACKING/V-LOCK
DVD/VHS
RESET
TIME SLIP / JET REW
S
C
H
E
D
U
L
E
F
U
N
C
T
I
O
N
S
PA
USE
S
T
OP
3
2
1
6
5
4
9
8
7
0
D
I
R
E
C
T
N
A
V
A
I
G
A
T
A
A
O
R
C
AN
C
E
L
CH
CH
PLAY
V
O
L
POWER
DVD/VHS
CH
RETURN
OK
A
B
9Select “Test” to check the
operation of the Set Top
Box cable.
Select,
Set
OK
Select Language
Seleccione el idioma
Sélection de langue
Press OK
Pulse OK
Appuyer sur OK
English
Français
Español
Set Clock Manually
/ :
/SAT AM
Month Day Year Hour Minute
1112
00
2000
DST Time Zone
Off EST
OK
Select TV type and press OK.
(Please refer to Operation Instruction
for details)
4:3 TV
16:9 Widescreen TV
OK
Aspect Ratio Selection
The unit can be turned on faster,in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
OK
Quick Start Setting
11
Select “Yes, try other
channels”, “Yes,
complete setup” or “No,
try another code”.
Select,
Set
OK
Completed testing the / IR codes.
Has the STB channel changed to the number you
selected? Please select from the following:
Note : “Yes, try other channels” is
recommended to try several channels.
IR Code : OO
OK
STB (Set Top Box) IR Settings
Yes, try other channels
Yes, complete setup
No, try another code
• Please refer to “Basic Operations” (pages
13 to 20) in the operating instructions.
• When this unit is connected to a Panasonic
TV (VIERA) supporting HDAVI Control 3
and initially set up, it automatically acquires
the TV setting information. For details,
please refer to page 12 in the Operating
Instructions.
8
Select an item and change
the STB (Set Top Box) IR
Settings.
Select,
Set
OK
Please choose settings based on your
Set Top Box.
STB (Set Top Box) Type Cable Box/DVR
Brand Name ABC
Max. CH digits 3 Digit
OK Key Operatin
Test
Off
OK
STB (Set Top Box) IR Settings
7
Select whether to control
your set top box with this
unit or not.
Select,
Set
OK
This unit can control your STB
(Set Top Box ) , when connected to IN1
input using the Set Top Box Control cable.
Start setup now?
No
Yes
OK
STB (Set Top Box) IR Settings
• If you select “No”‚ you can proceed to “Set
Clock Manually” (step 12‚ right).
10
Enter a channel that can
be received by your set top
box.
Select,
Set
OK
Start Set Top Box Control testing.
Please input the channel number
for testing. Use either numbered
buttons or UP/DOWN Cursors.
Channel :
OK
STB (Set Top Box) IR Settings
10
STB Type : Cable Box/DVR
Brand Name : Panasonic
Max. CH digits : 4 Digit
OK Key Operation : On
IR Code : OO
Number
0-- 9
Next,
13
Complete the settings.
OK
Select,
EA38V.indd3-4EA38V.indd3-4 2007/12/2716:05:112007/12/2716:05:11