Panasonic ES7036-E8 User manual

ORDERNO. SD0509E44C8
Wet/DryRechargeableShaver
ES7036-E8/ ES7038-E8
SPECIFICATIONS
SPECIFICATIONS
2005 Matsushita ElectricWorks, Ltd. All rights reserved.
Unauthorizedcopying and distribution isaviolation oflaw.
1

1. SCHEMATICDIAGRAM
1.1. ES7036
1.2. ES7038
2. WIRING CONNECTIONDIAGRAM
3. DISASSEMBLYINSTRUCTION
Followtheprocedurebelowtodisassemblethemainunit.
1. Removethecap, theouterfoil withfoil frameand theinnerblade.
2

2. Slidethetrimmerhandleup toopenthetrimmerand unhookthe
trimmerhandlebyinserting something like aslotedscrewdriveror
plasticspatulaintoaslit.
NOTE:Make surenottoscratchor damageon thehousing.
3. Removetrimmerand trimmerhandle.
3

4. To removethetrimmerdriving barortheslitbladedriving bar,
press barsoutward.
5. Loosenascrew and removethebottomcover.
6. Slidedownthesidepanelsforbothsides.
4

7. Loosentwoscrewson frontand fourscrewson theback side, and
removetwohousing clips.
8. Take outthehousing B.
5

9. Removethemotorassemblyand tubeholder.
10. And take outthebatteryassemblyfromhousing A.
11. Removethebatteryo-ring and washerineachbattery. Take out
therechargeablebatteries fromthechassis.
4. CAUTIONINASSEMBLY
6

NOTE:Whenreassembling, replace thenewwaterproofrubber. Make surewhetherthereisNO
foreign substance sticking around apartcoveredwithwaterseal.
4.1. Motor
Insertthemotor and press fitthewaterprooftubeneatlyunderthetubeholder. And putthefloat
spring propery.
4.2. Rechargeablebatteries
Inserttherechargeablebatteries intochassis. Attachthebatteryo-ring and washertothebattery.
Putthebatteryassemblyfrom thebatteryterminal sideintohousing A, and insertthemotor side
intohousing A.
NOTE:Press fittheleadwireneatlyinordertopreventpinching.
7

4.3. Module
Align theprojection ofswitchselectbutton on housing Awiththegroove ofswitchplateon
module.
4.4. Driving bars
Setthetrimmerdriving barand theslitbladedriving bar.
8

4.5. Sidepanel
Setthesidepanel on thebodyand slideitup until clicking thehookofpanel atthree locations.
NOTE:Make surethattheleft and rightsidepanelsarefirmlyfittedon bothrearand frontside.
Fitthefrontsideofhookfirst, thenon top and rearside.
4.6. Trimmer
1. Make sureifthebosses ofhandlearm insertintotheholes of
trimmer.
2. Align thebosses ofhousing withtheholes oftrimmer, and hook
thetrimmerhandle.
3. Confirm its operation orsmoothmovementoftrimmer.
9

5. TROUBLESHOOTING GUIDE
(Referto WIRING CONNECTION DIAGRAM)
<TROUBLE> <CHECK.> <
REMEDY>
Motor does not
rotate. <CHECK CHARGINGADAPTOR.> NO Replace
charging
Does not
charge.
Connecttheratedvoltagetothenormal mainunitbythe
charging adaptor.
adaptor.
Functionsfor a
mo- Check ifthechargestatuslampofmainunitislit.
mentand stops. Supplytheratedvoltagetotheadaptor and measurethe
voltage. OKifitis
Does not
operateby approximatelyDC 4.0V betweentheterminalsoftheplug withno-loadoperation.
ACpower
source.
OK
<CHECK RECHARGEABLE BATTERIES.> NO Replace
both
recharge-
Okay ifthevoltageofrechargeablebatteries ismorethan
approximately
able
batteries
thesame
1.2V DC between(+)and (-) terminals. time.
10