Panasonic ES-LV9Q User manual
Operating Instructions
(Household) Rechargeable Shaver
Model No. ES‑LV9Q
ES-LV9Q_EU.indb 1 2017/12/22 9:13:09
2
GB English����������������� 5
DDeutsch ������������� 29
FFrançais������������� 55
IItaliano��������������� 81
NL Nederlands������ 105
EEspañol������������ 131
DK Dansk��������������� 157
PPortuguês�������� 183
NNorsk ��������������� 209
SSvenska����������� 233
FIN Suomi��������������� 257
PL Polski��������������� 281
CZ ��������������� 307
SK �������� 331
H������������� 355
RO ����������� 381
TR Türkçe�������������� 407
ES-LV9Q_EU.indb 2 2017/12/22 9:13:09
3
PAN EUROPEAN
GUARANTEE
1103H016PC
Personal Care Products
Operating Instructions
(Household)
Rechargeable Shaver
Model No.
ES-LV9Q
a
c
d
b
b
f
g
e
Back
ES-LV9Q_EU.indb 3 2017/12/22 9:13:11
4
ES-LV9Q_EU.indb 4 2017/12/22 9:13:12
5
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
Operating Instructions
(Household) Rechargeable Shaver
Model No. ES‑LV9Q
Thank you for purchasing this Panasonic product.
Safety precautions..................... 8
Intended use ��������������������������������������12
����������������������������13
Preparation�����������������������������������������13
How to use �����������������������������������������15
��������������������������18
the inner blades���������������������������������20
Replacing the cleaning liquid�����������21
When the LOW/STATUS lamp glows
�������������������������������������������������������������22
FAQ �����������������������������������������������������22
Troubleshooting ��������������������������������23
Service������������������������������������������������27
For environmental protection and
������������������������27
������������������������������������28
Contents
ES-LV9Q_EU.indb 5 2017/12/22 9:13:12
6
Warning
•This appliance can be used by children aged from
8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children without supervision.
•The supply cord cannot be replaced. If the cord is
damaged, the AC adaptor should be scrapped.
ES-LV9Q_EU.indb 6 2017/12/22 9:13:12
7
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
• This WET/DRY shaver can be used for wet shaving using
shaving lather or for dry shaving. You can use this watertight
shaver in the shower and clean with water. The following
symbol means suitable for use in a bath or shower.
• Do not use anything other than the supplied AC adaptor
and the self‑cleaning recharger for any purpose.
Also, do not use any other product with the supplied AC
adaptor and the self‑cleaning recharger. (See page 13.)
•
power supply unit is required for connecting the electrical
appliance to the supply mains. The type reference of
power supply unit is marked near the symbol.
ES-LV9Q_EU.indb 7 2017/12/22 9:13:12
8
damage to property, always observe the following safety precautions.
The following symbols are used to classify and describe the
level of hazard, injury, and property damage caused when the
denotation is disregarded and improper use is performed.
DANGER Denotes a potential
hazard that will result in
serious injury or death.
WARNING
Denotes a potential
hazard that could result
in serious injury or death.
CAUTION
Denotes a hazard that
could result in minor injury
or property damage.
The following symbols are used to classify and describe the
type of instructions to be observed.
operating procedure that must not be performed.
operating procedure that must be followed in order to
operate the unit safely.
WARNING
This product
leave in a high temperature environment�
‑
Doing so may cause overheating, ignition, or explosion.
‑
Contact an authorized service centre for repair (battery
change etc).
Never disassemble except when disposing of the
product�
‑
‑
•The main unit, self-cleaning recharger, adaptor or
•The main unit, self-cleaning recharger, adaptor or
cord smells of burning�
•There is an abnormal sound during use or
charging of the main unit, self-cleaning recharger,
adaptor or cord�
‑ Immediately request inspection or repair at an
authorized service centre.
ES-LV9Q_EU.indb 8 2017/12/22 9:13:12
9
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
WARNING
Do not connect or disconnect the adaptor to a
household outlet with a wet hand�
‑ Doing so may cause electric shock or injury.
Do not immerse the AC adaptor and the self-
cleaning recharger in water or wash with water�
Do not place the AC adaptor and the self-cleaning
Never use the appliance if the AC adaptor is
household outlet�
or pinch the cord�
‑
short circuit.
household outlet or the wiring�
‑
Exceeding the rating by connecting too many plugs to
electric power source matched to the rated voltage
indicated on the AC adaptor�
‑
Disconnect the AC adaptor when cleaning the
shaver with water�
‑ Failure to do so may cause electric shock or injury.
plug to prevent dust from accumulating�
‑
caused by humidity.
Preventing accidents
Persons using an implanted medical electronic
device, such as a pacemaker, should not allow this
unit to touch the skin where the medical electronic
device is implanted�
‑ Doing so may cause an accident or illness.
Do not place within reach of children or infants� Do
not let them use it�
‑ Putting parts or accessories in the mouth may cause
an accident or injury.
Do not use or store the self-cleaning recharger on
top of other electrical devices�
‑ Doing so may cause electric shock due to liquid spill or
induce vomiting, drink a large amount of water and
‑ Failure to follow these instructions may result in
physical problems.
ES-LV9Q_EU.indb 9 2017/12/22 9:13:12
10
WARNING
‑ Failure to follow these instructions may result in
physical injury or injury to the skin.
CAUTION
Protecting the skin
blemishes or injured skin�
Do not touch the blade section (metallic section) of
the inner blade�
‑ Doing so may cause injury to skin or hand.
nails when in use�
‑ Doing so may cause injury to skin or reduce the life of
the system outer foil.
Do not remove the shaver from the self-cleaning
Charge” mode�
‑ Doing so may cause burn due to high temperatures
around the blades.
deformations before use�
‑ Failure to do so may cause injury to the skin.
Be sure to place the protective cap on the shaver
‑ Failure to do so may cause injury to skin or reduce the
life of the system outer foil.
Note the following precautions
Do not wrap the cord around the adaptor when storing�
‑ Doing so may cause the wire in the cord to break with
Do not allow metal objects or trash to adhere to the
power plug or the appliance plug�
‑
short circuit.
Do not disconnect the adaptor or the appliance plug
‑ Doing so may cause electric shock or injury.
people�
‑
Do not drop or hit against other objects�
‑ Doing so may cause injury.
washing the shaver blades�
‑ Using it with other products may cause discoloration or
cracking.
ES-LV9Q_EU.indb 10 2017/12/22 9:13:12
11
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
CAUTION
been spilt�
‑ Prolonged contact may cause discoloration of leather
Disconnect the adaptor from the household outlet
when not charging�
‑
electrical leakage resulting from insulation deterioration.
Use caution when opening detergent as spout is sharp�
‑ Failure to do so may cause injury.
DANGER
•
other products�
•
removed from the product�
•
•
•Do not let the positive and negative terminals of
metallic objects�
•
•
exposed to high temperatures, such as under
direct sunlight or near other sources of heat�
•Never peel off the tube�
‑
Doing so may cause overheating, ignition, or explosion.
WARNING
keep it within reach of children and infants�
‑ The battery will harm the body if accidentally
swallowed.
If this happens, consult a physician immediately.
ES-LV9Q_EU.indb 11 2017/12/22 9:13:12
12
WARNING
rinse with clean water, such as tap water�
‑ Failure to do so may cause eye injury.
Consult a physician immediately.
CAUTION
with the skin or clothes, rinse off with clean water,
such as tap water�
‑
Intended use
• Treat yourself to wet lather shaves for at least three weeks and
notice the difference. Your Panasonic WET/DRY shaver
requires a little time to get used to because your skin and beard
need about a month to adjust to any new shaving method.
• Do not bring the system outer foil into contact with hard
objects.
Doing so may damage the blades as they are very thin and
deform easily.
• Do not dry the main unit with a dryer or a fan heater.
Doing so may cause malfunction or deformation of the parts.
• Do not leave the shaver exposed to direct sunlight with the
foil frame detached.
Doing so may deteriorate the waterproof rubber and degrade
waterproof function, which may cause to malfunction.
• Store the shaver in a place with low humidity after use.
Failure to do so may cause malfunction due to condensation
or rust.
• Do not leave the detergent in location of high temperatures.
Doing so may cause deterioration.
• Keep both the inner blades inserted. If only one of the inner
blades is inserted, the shaver may be damaged.
• If you clean the shaver with water, do not use salt water or
hot water. Do not soak the shaver in water for a long period
of time.
ES-LV9Q_EU.indb 12 2017/12/22 9:13:12
13
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
A
1Protective cap
2System outer foil
3Foil frame
4Smooth rollers
• They help to glide over
the skin more easily.
5Foil frame release
buttons
6Power switch
7Lamp display
a. Used time lamp
b. Battery capacity
lamp
c. Shaving sensor lamp
()
d. Clean lamp ( )
e. Switch lock lamp
()
f. Foil/blade check
lamp ( )
g. Charge status lamp
()
8Appliance socket
9Outer foil section
:System outer foil
release buttons
;Inner blades
<Trimmer
=Trimmer handle
>Main body rear
terminals
BSelf-cleaning recharger
?Charging terminals
@Cleaning liquid unit
removal button
AIntake port
BSelf‑cleaning recharger
socket
CLock release lever
D
Cleaning liquid unit
STATUS lamp
LOW lamp
CLEAN lamp
DRY lamp
SELECT button
CAC adaptor (RE7-87)
Adaptor
Power plug
Cord
Appliance plug
Accessories
DTravel case
ECleaning brush
FOil
GSpecial detergent
(Detergent)
HOperating Instructions
IGuarantee Card
There may be water droplets inside the self‑cleaning
recharger at the time of purchase, but there is no problem
regarding the hygiene or the performance. (It is a residue of
the distilled water used for performance test.)
Preparation
Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the main body rear terminals.
1 Insert the appliance plug
[C] into the self-cleaning
recharger [B]�
2 Remove the protective cap
[A1] while pressing the side
of the cap and insert the
shaver into the self-cleaning
recharger�
• Slowly insert the shaver into the
self‑cleaning recharger taking care
not to damage the system outer foil.
1
2
3
3 Plug the adaptor [C] into a household outlet�
• Check that the charge status lamp ( ) is glowing.
• Charging is completed after approx. 1 hour.
ES-LV9Q_EU.indb 13 2017/12/22 9:13:13
14
4 Disconnect the adaptor after charging is completed�
While charging After charging is completed
glows.
The number of the battery
capacity lamp will increase
as charging progresses.
All the battery capacity lamp
and will glow and then
turn off after 5 seconds.
Notes
•
been in use for more than 6 months, the charging time may
change or the charge status lamp ( ) may not glow for a
few minutes. It will eventually glow if kept connected.
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the charge
status lamp ( ) will blink quickly and the battery may fail to
charge properly in extremely high or low temperatures.
• The shaver can be used for approximately 2 weeks with a
full charge.
(Based on one 3‑minute dry‑shave usages per day in an
ambient temperature range of 20 °C – 30 °C.)
The number of usable days varies depending on the
following conditions.
‑ Beard thickness
‑ Pressure applied to the skin
‑ Usage frequency of the sonic vibration cleaning mode
• If there is noise from the radio or other sources while using
or charging the appliance, move to a different location to use
the appliance.
Charging without the self-cleaning recharger
• Turn the shaver off.
• Wipe off any water droplets on the appliance socket.
1 Insert the appliance plug
[C] into the shaver�
2 Plug the adaptor [C] into a
household outlet�
3 Disconnect the adaptor after
charging is completed�
2
1
Note
You cannot operate the shaver while charging.
Preparing the cleaning liquid
Cleaning can start right after the usage by preparing in
advance. (See page 17.)
• Remove the AC adaptor from the self‑cleaning recharger.
1 Press the cleaning
liquid unit removal
button (1) and
remove the cleaning
liquid unit (2) on a
• When the self‑cleaning recharger is lifted, or on the soft
in the recharger properly. In that case, the cleaning liquid
unit cannot be removed.
ES-LV9Q_EU.indb 14 2017/12/22 9:13:14
15
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
2 Pour tap water (1) and
detergent (2) into the
cleaning liquid unit�
• Be careful not to let the
water rise above the
maximum water line (a).
• Pour the entire packet of
detergent.
3
cleaning liquid unit
[B] into the self-
cleaning recharger [B]
until it clicks�
Notes
• To replace the cleaning liquid, see page 21.
• Only use self‑cleaning recharger detergent for Panasonic
shavers.
Not doing so may cause malfunction or failure.
• Do not tilt the self‑cleaning recharger.
Doing so may cause spill or the number of days that cleaning
liquid can be used reduce.
• You can use the cleaning liquid for approximately 30 days if
used once per day.
(This will differ depending on beard thickness and the
ambient temperature.)
How to use
This appliance has a smart lock function, so the power switch
is automatically locked to prevent accidental operation when
not shaving.
Unlocking the power switch
The lamps illuminate upwards
and the power switch is
automatically unlocked when
the main body is grasped.
• The remaining battery
capacity will be shown and
then turn off after
approximately 1 second.
Locking the power switch
The lamps illuminate
downwards and the power
switch is automatically locked
1 minute after releasing the
main body.
• The switch lock lamp ( )
will light up for 5 seconds
and turn off.
• The sensor may respond and the power switch may be
unlocked when an electrical device or metal object is brought
closer. This is not abnormal.
ES-LV9Q_EU.indb 15 2017/12/22 9:13:15
16
Shaving beard
1 Press and shave�
• The “shaving sensor”, which automatically
adjusts the power depending on the beard
thickness, will operate.
It will shave with high power on areas
where the beard is heavy, and reduce the
power on areas where the beard is thin, to
reduce burden on the skin.
Tips for better shaving
Apply the whole system outer foil
perpendicularly against the skin and
shave by slowly gliding the shaver over
the face against the grain of the beard.
• The beard under the chin and
around the throat can be shaved
better by stretching the skin so the
beard will stand.
• To prevent damaging the system
outer foil, do not shave with only a
part of the system outer foil.
2 Press
While using After use
The used time and
remaining battery capacity
are shown and then turn off
after 7 seconds.
• The shown time returns to
[0’00”] after 10 minutes.
• The shaving sensor lamp
() blinks.
The used time and
remaining battery capacity
blink alternately and then
turn off after 8 seconds.
When the battery capacity is low
“10%” appears and “ ” blinks.
The appliance beeps twice after switched off.
• You can shave 1 to 2 times after “10%”
appears. (This will differ depending on usage.)
Notes
• The appliance may not operate in an ambient temperature
lower than approximately 5 °C.
• The shaving sensor may not respond depending on the type
and quantity of the shaving gel. This is not abnormal.
• Depending on the beard thickness or the amount of beard
trimmings in the shaver head, the shaving sensor may not react
and the driving sound may not change. This is not abnormal.
•
ES-LV9Q_EU.indb 16 2017/12/22 9:13:15
17
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
• The sonic vibration cleaning mode is activated when the
power switch is pressed for more than 2 seconds while the
shaver is not operating. (See page 18.)
You cannot shave in this mode.
Switching the shaver head
You can change the pivot action.
FREE
The shaver head is moved to
prevent missed spots.
LOCK
You can lock the shaver head.
LOCK
FREE
Using the trimmer
1. Slide the trimmer handle up to the
“” position so that the trimmer
stands upright.
2. Press and use.
FREE
LOCK
Press and hold the top knob (a) and
slide the trimmer handle down to
lower the trimmer.
FREE
LOCK
Tips for better usage
Apply the trimmer edge perpendicular to skin gently and move
downward slowly.
Trimming sideburns Pre‑shave of long beards
We recommend cleaning the shaver after each use.
1 Insert the shaver into the
self-cleaning recharger [B]
and plug the adaptor [C]
into a household outlet�
(See page 13�)
• Check that the charge status
lamp ( ) is glowing.
• When the LOW lamp or the STATUS
lamp lights up, see page 22.
1
21
2 Press �
The CLEAN lamp and the DRY lamp glow, and the
“AUTO” mode will start after approximately 6 seconds.
• It is not possible to change the mode after the “AUTO”
mode has started.
Clean
10 min
80 min* Charge
0 to 60 min
*When the ambient temperature of the self‑cleaning
recharger is low (approx. 15 °C or lower): 170 min
ES-LV9Q_EU.indb 17 2017/12/22 9:13:16
18
3 Remove the adaptor after the selected mode is
completed�
Clean the shaver with water or with the
cleaning brush once per month. (See
pages 18 and 20.)
The main unit neck section (a), inner blade
attachment part (b), trimmer, system outer foil
gaps, etc. cannot be cleaned with the self‑
cleaning recharger.
Changing the mode of self-cleaning recharger
The “Charge” mode starts when attaching the shaver, and the
mode can be changed by pressing the SELECT button.
Charge mode
(Charge)
AUTO mode
(Clean/Dry/
Charge)
mode
(Dry/Charge)
Notes
• Do not press the cleaning liquid unit removal button during
cleaning as the cleaning liquid may spill causing a malfunction.
• The drying time may increase in an ambient temperature
approximately 15 °C or lower.
The Clean or Dry function may not operate under extreme
low temperatures (approximately 0 °C or lower).
• A lubricant constituent is included in the detergent, so
smooth shave is maintained without applying oil.
Cleaning with water
• Turn the shaver off and disconnect the AC adaptor.
1
A2
]�
2 Press for more than
2 seconds to activate the sonic
vibration cleaning mode�
• Splashing of foam is suppressed.
• The battery capacity lamps blink in order.
• After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power switch.
3 Remove the outer foil section
[A9] and clean with running
water�
• See page 20 for attaching and
removing the outer foil section.
• Splashing is reduced by rinsing the shaver in sonic
vibration cleaning mode.
• After rinsing with water, shake the shaver up and down
for a few times to remove excess moisture and then wipe
off any drops of water with a dry cloth.
ES-LV9Q_EU.indb 18 2017/12/22 9:13:17
19
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
4 Attach the outer foil section
recharger [B]�
1. Insert the shaver into the self‑
cleaning recharger and plug the
adaptor into a household outlet.
• Check that the charge status
lamp ( ) is glowing.
2. Press twice.
The DRY lamp glows, and the “Dry/Charge” mode will
start after approximately 6 seconds.
• It is possible to change to the “AUTO” mode even
after the “Dry/Charge” mode has started.
180 min Charge
0 to 60 min
3. Remove the adaptor after the selected mode is completed.
5 Lubricate the shaver�
It will keep the movement of the
blade smooth and maintain a comfort
shave.
1. Apply one drop of oil to each of the
system outer foils.
2. Raise the trimmer and apply a drop of oil.
3.
seconds.
4. Switch off the shaver, and wipe off any excess oil from
the system outer foil with a soft cloth.
1
21
Dry in a shade and apply oil.
Notes
• Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
• Do not wipe with thinners, benzine, alcohol etc.
Doing so may cause malfunction, or cracking or discoloration
of the parts.
Wipe with diluted soapy water.
• Do not use any kitchen or bathroom detergents other than
hand soap.
Doing so may cause malfunction.
• Do not use the self‑cleaning recharger while droplets or soap
remain on the shaver.
Doing so may change the concentration level or composition
of the cleaning liquid in the cleaning liquid unit, which may
degrade cleaning, sterilization, lubrication and drying
performance. This may also cause cleaning liquid to spill
from the self‑cleaning recharger.
ES-LV9Q_EU.indb 19 2017/12/22 9:13:18
20
Cleaning with the brush
Remove the outer foil section and the inner blades.
(See this page.)
Cleaning with the long brush
Clean the outer foil section
[A9], system outer foil [A2],
the shaver body [A] and the
trimmer [A<] using the long
brush.
Cleaning with the short brush
• Clean the inner blades [A;] using
the short brush by moving it in
direction as illustrated.
• Do not move the short brush
perpendicularly against the blades
as it will damage the inner blades
and affect their sharpness.
the inner blades
appears on the lamp display once a year. (Based on one
3‑minute shave use per day)
We recommend checking the system outer foil and the inner
blades when it appears.
Press the power switch for more than 30 seconds to turn off .
Even if is not turned off right after the replacement, it will
automatically turn off within approximately 7 uses.
system outer foil once every year
inner blades once every two years
Removing the outer foil section
Press the foil frame release buttons [A5] and
lift the outer foil section [A9] upwards.
Attaching the outer foil section
After turning the foil frame mark ( ) to the
front, securely attach the outer foil section [A9]
to the shaver until it clicks.
1. Press the system outer foil release buttons
[A:] and pull down the system outer foil
[A2].
• Do not press the system outer foil release
buttons with excessive force.
Doing so may bend the system outer foil, preventing
complete attachment to the foil frame.
2. Align the foil frame mark ( ) and the system outer foil
mark ( ) and securely attach together until it clicks.
Replacing the inner blades
1. Remove the inner blades [A;] one at a time.
2. Insert the inner blades one at a time.
Note
Do not throw away the foil frame.
ES-LV9Q_EU.indb 20 2017/12/22 9:13:19
Other manuals for ES-LV9Q
1
Table of contents
Languages:
Other Panasonic Electric Shaver manuals
Panasonic
Panasonic ER-206 User manual
Panasonic
Panasonic ES-LV81 User manual
Panasonic
Panasonic ES-WR40 User manual
Panasonic
Panasonic ES-8163 User manual
Panasonic
Panasonic ES-2113 User manual
Panasonic
Panasonic ES-WD51 User manual
Panasonic
Panasonic ES2209A Operating User manual
Panasonic
Panasonic ES-ALV6H User manual
Panasonic
Panasonic ES-881 User manual
Panasonic
Panasonic ES?RT51 User manual
Panasonic
Panasonic ES-LT68 User manual
Panasonic
Panasonic ES-LT70 User manual
Panasonic
Panasonic ES7036 User manual
Panasonic
Panasonic ES-LV54 User manual
Panasonic
Panasonic es-wd94 User manual
Panasonic
Panasonic ES2291DT User manual
Panasonic
Panasonic ES-3042 User manual
Panasonic
Panasonic ER-GD61 User manual
Panasonic
Panasonic ES-7109 User manual
Panasonic
Panasonic ER214/216 User manual
