Panasonic KX-PW38CL User manual

Facsimile with Cordless Phone
Quick Reference Guide
KX-PW38CL
KX-PW48CL
E
メ
ー
ル
Model No.
Table of Contents
Finding the controls ………………………………………………………2
Installations and connections …………………………………………4
Setting the date and time ………………………………………………8
Setting your facsimile telephone number …………………………8
Setting your logo …………………………………………………………9
Automatic dialing on the main unit …………………………………10
Automatic dialing on the portable handset ………………………11
Intercom between portable handsets ……………………………12
Sending faxes ……………………………………………………………13
Receiving faxes …………………………………………………………14
Operating the built-in answering device …………………………16
Using the hand scanner ………………………………………………17
Individual e-mail services ……………………………………………22
Specifications …………………………………………………Back cover
KX-PW38CL
Thank you for purchasing a Panasonic facsimile.
●This guide explains some basic features and operations, but not all of them.
For further details, see the Japanese operating instructions.
●This product is designed for use in Japan.
Panasonic cannot provide service for this product if used outside Japan.
●Any details given in this guide are subject to change without notice.
KX-PW38CL has one portable handset.
KX-PW48CL has two portable handsets.

2
Finding the controls
Main unit (control panel)
Multi-operation buttons refer to the
function displayed on the display panel.
Liquid crystal display
Function button initiates programming.
Replay button plays back recorded
messages.
Auto Answer button
—light on: answering device activated.
—light off: used as a regular telephone.
Microphone
Store button stores information (phone
numbers, names etc.) into the telephone
directory.
Search Dial searches the directory or
displays programming features.
Start/Copy button starts faxing or copying.
Stop button
Intercom button
Comista button & indicator
accesses Comista services.
Speakerphone button
Redial/Pause button
E-Mail button & indicator
Call Memory button & indicator stores
the caller ID of incoming calls.
Resolution button selects the resolution
when faxing or copying.
Tone button switches to tone dialing.
Volume button adjusts ringer, speaker
and handset volume.
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
1 2 3 54 6
7
8
9
10
15
161719 18 1112
14 13

Portable handset
Finding the controls
増設
クリアー
キャッチ


● 
To adjust the volume.
● 
To redial the last number
dialed.
● 
To insert a pause.

Tone button
● 
To switch to Tone dialing
mode.
● 
To make/answer calls.
● 
To page the main unit or
another portable handset.
● 
To change the character
input mode.
● 
To end a call.
● 
To end or exit from editing or
other operations.
● 
To put a call on hold.
● 
To start a search in the
Number Display log.
● 
For call waiting service
users.
● 
To clear letters/numbers.
● 
To receive faxes.
● 
To use the speakerphone.
● 
Used when installing
additional portable
handsets. Sharp button
● 
To search in the
directory.
音量

再ダイヤル
電話帳
and buttons refer to the function
displayed on the bottom of the display.
They function differently depending on
the mode.
Call/Charge indicator
Dial buttons
Charging
Full Apricot (Red) Off
LCD (with back light)
Speakerphone
Microphone
Do not cover the
microphone while
talking.
トーン


How to use buttons
How to use key
再ダイヤル
電話帳
音量
1
2
3
4

● 
Displays battery strength, telephone
numbers etc.
● 
when receiving a call, the indicator
will blink.
● 
when placed on a charger
Function menu that is
controlled by or .
Portable handset number
Battery strength
Displayed when entering
characters for the telephone
directory, etc.
外線
文字切替
内線
切
保留
着信メモリー
スピーカーホン
カナ呼出音切
ｺｷ 1
登録 修正 機能
12 3
44
ファクス
めざまし

Battery indicator
(Shows the amount of
battery power left)
Operation indicator
(Shows the condition of the scanner)
Delete button
To delete the last scanned contents,
press for 2 seconds. Resolution button
Memory indicator
(Shows the amount of memory being used)
Scanning width button
To start or stop scanning
()
Hand scanner
3

4
Installations and connections
Installing the ink film
Control panel
1
2
Press
Open the control panel
and push it back until
it stops.
“T” shaped
gear (blue) New ink film
3
2
“T” shaped gear (blue)
Right slot
Blue core
Wind the
“T” shaped
gear (blue)
to the arrow
direction. Do not slacken.
1
Click
White core White core
2Install the ink film.
Take out the ink film from the bag, and find the
“T” shaped gear (blue).
1
3Tighten the ink film and close the control panel.
If the ink film is slack, tighten it by winding the gear.
Insert the white core into the slots shown in the
picture below.
4
Close the control panel by pressing down on
both sides.
●Make sure you close the control panel
securely by pressing down on both sides until
it locks.
2
Hold the ink film like in the picture below and
insert the blue core into the right slot of the main
unit.
Insert the “T” shaped gear (blue) into the left slot
of the main unit.
3
2
1Open the control panel.

5
Installations and connections
Installing recording paper (A4 size)
1Install the recording paper tray.
Insert the left tab on the recording paper tray into
the left slot of the main unit.
Insert the right tab into the right slot of the main
unit.
2
1
2Set the recording paper.
Open the paper entrance cover.
Make sure it locks in place.
1
Fan the stack of recording paper (A4 size).
2
Close the paper entrance cover securely by
pushing it back gently.
4
2
1Recording
paper tray
Slot Tab
Paper entrance cover
Printing
side is on
the back
Up to 30 sheets
Paper entrance cover
Recording paper
cover
Recording paper
tray
Recording paper cover
3Install the recording paper cover on the recording
paper tray by sliding it down from the top.
Insert the
recording paper
into the recording
paper tray.
3

6
Installations and connections
Connecting the main unit
Telephone line cord Wall jack
Power cord
Power outlet
AC 100V
(電話回線へ)
回線
Click Click
Click
1Extend the antenna and raise it vertically.
2Connect the cord and place the handset on the
main unit.
3Connect the telephone line cord.
4Connect the power cord.
After power is on・・・・・・
This unit will automatically select the dialing mode
(Tone/Pulse).
Subscribing to “Comista” service
An automatic online setup will start in 30 minutes.
➡ After the online setup is completed, comista indicator
will light in green to show that comista service is
ready to be used.
●During the online setup, your telephone number will
be sent to NTT Communications.
●If you do not want to use the “Comista” service,
perform the procedure described right.
If you do not want to use Comista service
perform the following procedure.
Press and rotate
until the following is displayed.
Press to select
「シナイ」.
Press
.
Press
.
ストップ
4
登録
3
選択
2
くるくる電話帳
1
ｺﾐｽﾀｱﾘﾖｳ=ｽﾙ
ｺﾐｽﾀｱﾘﾖｳ=ｼﾅｲ
1
2 3
4
5
6
7
89
0
くるくる電話帳
ストップ
ｾｯﾃｲｦ ｶｲｼﾞｮｼﾏｼﾀ
ｺﾐｽﾀｱﾘﾖｳ=ｼﾅｲ
indicator is turned off.

7
3Charge the battery in the charger for 10 hours.
Plug
Charger AC adaptor
Power outlet
(AC 100 V)
Black
Red Connector
Battery Click
Battery cover
Charge indicator
–lights apricot (red):
while charging.
–lights off:
charging completed.
Setting up the portable handset
1
2
●After your Panasonic battery is fully charged,
it will last up to about 7 hours of conversation.
●The hand scanner battery is charged when the
hand scanner is inserted into the main unit.
Installations and connections
Setting up the hand scanner
2Slide open the battery cover by gently pushing the
part.
Imaging sensor
Battery cover
3Connect the battery to the hand scanner, and close
the battery cover.
1Press down the knob of the hand scanner, and pull
out the hand scanner from the main unit.
Cord(Red) Connector
Cord(Black)
4Insert the hand scanner, and charge the battery
for 10 hours.
Display
ﾖﾐﾄﾘ ﾏｲｽｳ 0 ﾏｲ

ｽｷｬﾅｰ ｾｯﾃｲﾁｭｳ
Bottom side

8
ｷﾉｳｱﾄｳﾛｸｱﾓｰﾄﾞ
ｾｾﾝﾀｸﾊ[ｸﾙｸﾙ]ﾏﾜｽ
Cursor
TEL= ．．．．．．．．．．．
TEL=0980765043
.
ﾄｳﾛｸｱｼﾏｼﾀ
.
.
Setting the date and time
1Press (Function).
機能
1Press (Function).
機能
2Press .
3Enter the correct year/month/day.
Example: Nov. 3, 2001
Press .
機能
ストップ
ｷﾉｳｱﾄｳﾛｸｱﾓｰﾄﾞ
ｾｾﾝﾀｸﾊ[ｸﾙｸﾙ]ﾏﾜｽ
Example :
Cursor
2001 年 05 月 01 日
14 ： 00
2
2Press .
2001 年 11 月 03 日
14 ： 00
3Enter your facsimile telephone number, up to 20
digits.
Example: 098 765 43··
TEL=80765043
..
4Enter the correct hour/minute in a 24-hour clock entry.
Example: 15:45 (3:45 PM)
Press . 4Press (Register).
登録
2001 年 11 月 03 日
15 ： 45
5Press (Register).
登録
6Press (Stop).
ストップ
11 月 03 日 115 ： 45
ﾖｳｹﾝｱﾛｸｵﾝｱ 00 ｹﾝ
5Press (Stop).
ストップ
Setting your facsimile
telephone number
機能
音量
ストップ
The (Space) button
replaces the digit with a space.
音量
2001 年 11 月 03 日
15 ： 45
ﾄｳﾛｸｱｼﾏｼﾀ
1

9
1Press (Function).
機能
2Press .
3Enter your logo, up to 30 characters, using the dial
keypad.
●To enter English characters easily, press
(Character input mode) repeatedly and select “英”
(English input mode).
●For details, see below.
文字切替
ｷﾉｳｱﾄｳﾛｸｱﾓｰﾄﾞ
ｾｾﾝﾀｸﾊ[ｸﾙｸﾙ]ﾏﾜｽ
ﾅﾏｴ=
機能
ストップ
Example: Micah
1. Press once.
2. Press six times.
3. Press six times.
4. Press to move the cursor to the next space
and press four times.
5. Press five times.
Cursor
ﾅﾏｴ=
M
ﾅﾏｴ=
Mi
ﾅﾏｴ=
Mic
ﾅﾏｴ=
Mica
ﾅﾏｴ=
Micah
M
4Press (Register).
登録
ﾅﾏｴ=
Micah
ﾄｳﾛｸｱｼﾏｼﾀ
5Press (Stop).
ストップ
Character input and command key table
、。！？ / − ＃ ,;:｜.
( )〔 〕{ }<>「」
ワヲン゛°、。−
“英”English
“カナ” Katakana
アイウエオァィゥェォ @.-&＄¥%+=〜^
DEFdef
GHIghi
JKLjkl
MNOmno
PQRSpqrs
TUVtuv
WXYZwxyz
カキクケコ
サシスセソ
タチツテトッ
ナニヌネノ
ハヒフヘホ
マミムメモ
ヤユヨャュョ
ラリルレロ
1
2
3
4
5
6
7
8
9
0
“数”Numbers
ABCabc
Pressing the dial keys will select a character as shown below.
Setting your logo
Character
Dial key
Used to change the character input mode.
Used to move the cursor to the right.
Used to move the cursor to the left.
Used to delete a character.
Used to insert a space.
Command keys
(Main unit), (Portable handset)
(Main unit), (Portable handset)
文字切替
内線
文字切替
(Main unit), (Portable handset)
(Main unit), (Portable handset)
クリアー
キャッチ
クリアー
(Main unit), (Portable handset)
音量
音量
●When entering e-mail address, the small letters are displayed before the capital letters.
●When entering e-mail address, you can not enter the following symbols: 、。− .「」
●When entering e-mail address, you can enter the English and numerical characters only.
M

10
Automatic dialing on the main unit
1
2 3
4
5
6
7
89
0
ストップ
電話帳登録/修正
電話帳登録/修正
くるくる電話帳
スピーカーホン
Handset
Storing names and telephone
numbers in the search dial Making a voice call using the search dial
1Press (Phonebook).
●“XXX” shows the
remaining station numbers
you can store.
●You can program up to
150 stations, including 4
pre-programmed stations.
電話帳登録/修正
1Rotate the (Search dial) until the desired name
is displayed.
くるくる電話帳
2Enter the name, up to 12 characters (see the table on
page 9 for instructions).
3Press (Register).
登録
2Lift the handset or press (Speakerphone).
スピーカーホン
4Enter the telephone number, up to 30 digits.
●To correct a mistake, press (Clear).
クリアー
5Press (Register).
登録
6If necessary, enter the group number (1–9).
ﾅﾏｴ=
ﾃﾞﾝﾜﾁｮｳｱｱｷ ××× ｹﾝ
7Press (Register).
●To program other items, repeat steps 2–7.
登録
8Press (Stop) to exit the program.
ストップ
Editing a stored name or number
1Rotate the (Search dial) until the desired name
is displayed.
くるくる電話帳
2Press (Phonebook).
●If you do not need to edit the name, skip to step 4.
電話帳登録/修正
3Edit the name (see the table on page 9 for
instructions).
4Press (Register).
●If you do not need to edit the telephone number,
skip to step 6.
登録
5Enter the correct telephone number.
6Press (Register).
●If you do not need to change the group number,
skip to step 8.
登録
7If necessary, enter the correct group number.
8Press (Register).
登録