Panasonic CY-VM5800U User manual

Panasonic.
l 5.8 Color LCD Monitor
Ecran couleur à cristaux liquides de 5,8 pouces
Monitor LCD en color de 5,8”
CY-VM5800U
Operating Instructions
Manuel d'instructions
Manual de instrucciones
e
Please
read
these
instructions
carefully
before
using
this
product
and
save
this
manual
for
future
use.
e
Prière
de
lire
ces
instructions
attentivement
avant
d'utiliser
le
produit
et
garder
ce
manuel
pour
l'utilisation
ultérieure.
e
Lea
con
atención
estas
instrucciones
antes
de
utilizar
el
producto
y
guarde
este
manual
para
poderlo
consultar
en
el
futuro.

im
safety Information
WARNING:
TO AVOID THE RISK OF SERIOUS INJURY OR
POSSIBLE VIOLATION OF LAWS, NOT FOR USE
WHERE VISIBLE TO DRIVER FOR ANY PURPOSE
OTHER THAN NAVIGATION OR USE WITH REAR
VIEW CAMERA.
When Driving
o The driver must not operate the color LCD
monitor. Operating the color LCD monitor may
lead to distraction and cause an accident. Stop
you car in a safe location when operating the
unit.
e The driver must not watch videos while driving.
it may lead to distraction and cause an acci-
dent.
9 Keep the unit at an appropriate sound level.
Driving with the sound at a level that prevents
you from hearing sounds outside and around
the car may cause an accident.
CAUTION:
When Car Washing
| Do not expose the product to water or excessive
moisture. This could cause electrical shorts, fire
or other damage.
WARNING:
© Que to the extreme danger of accidents
occurring, the driver must not watch the tele-
vision or videos while driving.
@ Do not expose unit to direct sunlight or exces-
sive heat.
PANASOMIC MODELNO. CY-VM5800U WARNING
N° DE MODELE
AE
12V
YFM014C2407A
Manzlactured by Matszstiita Electric (Taiwan) Co., Ld.
Taipei Faiwaa Mace ja Taiwan
GyeVMS800U
WARNING:
For safe driving, watching TV and video is
available only in stopped condition with the
parking brake pulled. “WARNING” will be dis-
played while the parking brake is not engaged.
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, USE ONLY THE INCLUDED COMPO-
NENTS.
The user should bear in mind that in some
areas there may be restrictions on how and
where this unit must be installed. Consult your
dealer for further details.
Dus to the extreme danger of accidents occurring, the driver
must not watch the television or videos while driving.
Do not expose unit to direct sunlight or excessive heal.

Consignes de sécurité
Avertissement
Pour éviter tout risque de blessures graves et toute
infraction au code juridique, l'appareil ne doit pas
étre utilisé à un endroit oú te conducteur puisse le
voir autrement que pour la navigation, n! avec une
caméra de rétrovision
Au volant
e Le conducteur ne doit jamais faire fonctionner ce
moniteur lorsqu'il conduit son véhicule Le fait d'u-
tiliser le moniteur lorsqu'on est au volant réduit con-
sidérablement la vigilance du conducteur et multiphe
les risques d'accident Arrêter ie véhicule dans un
endroit sûr pour manipuler le moniteur
e Le conducteur n'est pas autorisé à regarder une
bande vidéo en conduisant, car ceci peut entraíner
une perte de vigilance et causer un accident
* Maintenir le moniteur à un niveau sonore approprié
afin de ne pas masquer les sons ambrants et éviter
ainsi tout risque d'accident
PRÉCAUTION
Lavage de la voiture
Afin de prevenir tout risque de court-circuit ou d'in-
cendie, ne pas exposer l'équipement à l'eau ni à une
humidité excessive
AVERTISSEMENT
e Étant donné le risque élevé d'accident, le conduc-
teur ne dott pas regarder la télévision ou un vidéo
lorsqu'il est volant
e Ne pas exposer l'appareil directement aux rayons
du soleil ou à une chaleur excessive
AVERTISSEMENT
Pour une conduite sécuritaire, le visionnement de la
télévision ou d'un vidéo n'est possible que lorsque le
véhicule est immobilisé avec le frein à main engagé
"WARNING" (avertissement) s'affiche lorsque le
frein à main n'est pas engagé
POUR RÉDUIRE LES RISQUES D'INCENDIE OU DE
CHOC ÉLECTRIQUE, N'UTILISER QUE LES COM-
POSANTS FOURNIS
L'utilisateur doit garder à l'esprit que, dans cer-
taines régions, 1) peut y avoir des restrictions quant
au lieu et à la facon d'installer cet appareil
Contactez votre détaillant pour plus de détails
Información para su seguridad
ADVERTENCIA
PARA EVITAR EL RIESGO DE SUFRIR HERIDAS
GRAVES 0 INFRINGIR POSIBLEMENTE LAS LEYES,
EL APARATO NO DEBERÁ UTILIZARSE EN NINGÜN
LUGAR DONDE EL CONDUCTOR PUEDA VERLO CON
OTRA FINALIDAD QUE NO SEA LA NAVEGACIÓN O EL
USO CON UNA CÁMARA RETROVISORA
Al conducir
e El conductor no debe utilizar el monitor LCD en
color La utilización del monitor LCD en color puede
distraerlo y causar un accidente Detenga su
vehiculo en un lugar seguro cuando manipule el
aparato
e El conductor no debe ver videos mientras conduce
Esto puede distraerlo y causar un accidente
e Mantenga el aparato con un nivel de sonido apropia-
do Conducir con el sonido a un nivel que le impida
oir los sonidos del exterior y de alrededor del
vehiculo puede causar un accidente
PRECAUCIÓN
Al lavar el vehículo
No exponga el producto al agua o a una humedad exce-
swa Esto puede causar descargas electricas, incen-
dios u otros daños
ADVERTENCIA
e Debido al gran riesgo de que se produzcan acci-
dentes, ei conductor no debe ver la televisión ni
vídeos mientras conduce
e No exponga el aparato a la luz solar directa ni a un
calor excesivo
ADVERTENCIA
Para conducir con seguridad, la televisión y los
vídeos sólo pueden verse estando el vehículo parado
y con el freno de estacionamiento aplicado Si el
freno de estacionamiento no está aplicado se visual-
iza la palabra "WARNING"
PARA REDUCIR EL RIESGO DE INCENDIOS 0
DESCARGAS ELÉCTRICAS, UTILICE SOLAMENTE LOS
COMPONENTES INCLUIDOS
El usuario deberá tener en cuenta que en algunas
zonas tal vez haya restricciones sobre cómo y dónde
puede ser instalado este aparato Consulte a su con-
cesionario para conocer más detalles
CYVMS800U
E
= Y. KINA
mre e i a

ONA ZI
Panasonic welcomes you to our ever growing family of electronic product owners. We know that this prod-
uct will bring you many hours of enjoyment. Our reputation is built on precise electronic and mechanical
engineering, and our products are manufactured with carefully selected components and assembled by
people who take pride in their work. Once you discover the quality, reliability, and value we have built into
this product, you too will be proud to be a member of our family.
O Features
o Wide-screen 16:9 aspect ratio is ideal for film oCan be connected to the DVD player (CX-
viewing. DV700U), color LCD monitor/CD, DVD player (CY-
o 280 800 pixels high-definition 5.8 inches large VMD9000U), video deck and other devices.
LCD monitor.
o TFT (Thin Film Transistor) active matrix for accu-
rate color reproduction.
C Components
o Operating instruction.................... 1 o Supplied hardware ......... 1 set (> page 36)
o Remote control unit..................... 1 0oWarantycard......................... 1
o Battery (CR2025)....................... 1
O Contents
Safety Information .................................................... 2
Use this Product Safety.............. SR RUE yes jan eens D
Name of Controls aotearoa EUER RE PR Ib RE E or 10
Remote Control Unit Preparation ......................................... 11
Battery installation, battery notes, contro! reference guide
Before Using the Display Unit............................................ 12
lpüt SOIGCUON 55242240 dete toa cd a CR RO A o de RD I 13
AspacESattuilgiiuoo snos ss eer Ro ae eta od Non cte e les AAA 14
Brightness AMA en ne 15
Display SOIN". 2e eU eed TEE COR ERE UU Prem qat 16
Black level, contrast, color, tint
Installation Guide ..................................................... 18
Step-by-step procedures
Electrical Connections .................................. RIT nica soe 21
Cautions, wiring diagram, basic system configuration, parking brake cord, advanced system configuration
MOUDIOSNOGUNG: aa AA A AN een ane ic eode e SOS 24
Where to get service help, troubleshooting tips
MaInIenanpe ue AA TA Dead anew AA oe Gon pads LA D e: 26
To prevent damage to the system exterior, clean dirt by wiping lightly with a soft cloth
SOGCIICAUONS: ii ria uth ees Aaa 27
_ GARE

Use this Product Safety
When Parked
e Parking in direct sunlight can produce very high
temperatures inside your car Give the interior a
chance to cool down before switching the unit on
e Do not watch the monitor with the engine off It
will consume battery power and may prevent the
engine from starting
Use the Proper Power Supply
e This product is designed to operate with a 12 V,
negative ground battery system (the normal sys-
tem in a North American car)
Use Authorized Servicenters
e Do not attempt to disassemble or adjust this pre-
cision product Please refer to the Servicenter list
included with this product for service assistance
For Installation
e Where and how this unit ts installed differs
according to the car model concerned As
such, the information contained in this installa-
tion guide is designed for professional
installers and is not intended for non-technical
individuals
e Be sure to install the monitor in a position that
does not obstruct the driver's vision
e if the monitor has been installed for the rear
seat passengers, they must be careful to pre-
vent injury by hitting their heads on the monitor
in case of an accident
e Do not install the unit in an area where rt would
obstruct the operation of an atr bag
e Ask a trained technician. to install the unit
Installation and wiring require training and
experience
To be safe, ask the sales outlet where you pur-
chased the unit to perform the installation
Find the model number and serial number on
either the back or bottom of the unit Please
record them in the spaces below and retain this
booklet as a permanent record of your purchase
to help with identification in case of theft
CY-VM5800U
MODEL NUMBER
SERIAL NUMBER
DATE PURCHASED
FROM
When Operating
o Be sure not to let the unit fall or be strongly
impacted since this may cause a malfunction or
fire
© Cautions for the Liquid Crystal Panel
o Do not leave the liquid crystal panel surface facing
upwards
Storage temperature range —4 °F to 176 °F
(—20 °C to 80 °C)
When the liquid crystal panel reaches high tem-
peratures or low temperatures, chemical changes
occur within the liquid crystal panel which may
cause malfunctions
e Do not strongly impact the liquid crystal panel
o When the temperature is very cold or very hot, the
image may not appear clearly or may move slow-
ly Also, movement of the image may seem to he
out of synchronization or the image quality may
decline in such environments Note that this is not
a malfunction or problem
Usage temperature range 32 °F to 104 °F
(0 °C to 40 °C)
e There may be red spots, blue spots and green
spots on the panel surface This is a characteristic
of liquid crystal panels and is not a problem The
liquid crystal panel is built with very high precision
technology and has at least 99 99% effective
image pixels Be aware that on O 0196 of the panel
there may be missing pixels or constantly light
pixels
Spots
DUAE .
esa Doc (meu

Panasonic est heureuse de vous compter parmi les utilisateurs de ses appareils électroniques Nous pouvons vous
assurer que cet appareil vous procurera de longues heures d'agrément Notre réputation est fondée sur une ingénierie
électronique et mécanique de haute précision, laquelle préside à là fabrication d'appareils ne comportant que des com-
posants de choix assemblés par un personnel soucieux de la bonne réputation acquise par la qualite de son travail
Aprés avoir découvert la qualite, la valeur et la fiabilité de cet appareil, vous aussi serez fier d'étre un client Panasonic
O Caractéristiques
o Le rapport de format d'écran large 16 9 est ideal pour le o Matrice active TFT (transistor a couches minces) pour
visionnement des films une reproduction fidéle des couleurs
o Ecran à cristaux liquides de 5,8 pouces, a haute défini- o Peut être raccordé au lecteur DVD (CX-DV700U), au
tion de 280 800 pixels lecteur CD, DVD/écran couleur à cristaux liquides (CY-
Os->ALPID
VMD9000U), à une platine vidéo et a d'autres appareils
CI Éléments constitutifs
o Manuel d'instructions 1 © Matériel d'installation 1 ensemble (= page 36)
o Télecommande 1 e Carte de garantie 1
o Piles (CR2025) 1
O Table des matiéres
Consignes de sécurité 3
Utiliser ce produit en respectant la sécurité 7
Noms de commandes 28
Preparation de la telecommande 29
Mise en place de la pile, remarques sur la pile, guide de référence sur les commandes
Avant d'utiliser l'unité d'affichage 30
Sélection de l'entrée 31
Réglage du format 32
Réglage de la luminosité 33
Réglage de l'affichage 34
Niveau du noir, contraste, couleur, nuance
Guide d'installation 36
Procédure étape par étape
Branchements électriques 39
Attention, schéma de cáblage, configuration systéme de base, cáble de connexion du frein de stationnement, configura-
tion systéme évoluée
En cas de difficulté 42
Ou obtenir le service aprés-vente, conseils de depannage
Entretien 44
Pour éviter des dégâts à l'extérieur de l'appareil, Nettoyer les souillures en frottant légèrement avec un linge doux
Données techniques ; ; 45
6
YU MSBODU

Utiliser
ce
produit
en
respectant
la
sécurité
Voiture stationnée
e L'habitacle d'une voiture immobile exposée au soleil
toutes vitres fermées devient rapidement très chaud
Laisser rafraichir l'intérieur du véhicule avant d'utiliser
l'appareil
e Ne pas regarder le moniteur lorsque le moteur est
arrété Le fait de regarder le moniteur avec le contact
moteur coupé consomme beaucoup de batterie ce qui
pourrait empécher le moteur de repartir
Source d'alimentation
e Cet appareil est conçu pour fonctionner sur un système
d'alimentation avec batterie de 12 V à masse negative
(système standard sur les voitures de construction
nordamericaine)
Réparation des centres de service agréés (Servicenters)
e Ne pas tenter de démonter ou d'ajuster l'appareil soi-
méme Veuillez consulter la liste des Centres de service
agrees (Servicenter) qui accompagne ce produit en
qualité de moyen d'assistance de service aprés-vente
Installation
e L'endroit et la facon d'installer cet appareil different
selon le type de vehicule dont il s'agit Les informa-
tions de ce guide d'installation s'adressent en fait
aux installateurs qualifiés, elles ne sont pas fournies
a l'intention des individus sans qualifications tech-
niques
e Installer le moniteur vidéo de telle maniére qu'il ne
géne pas la visibilité du conducteur
e Si le moniteur a été installé pour les passagers
arnére, ceux-cr doivent faire trés attention de ne se
blesser a la téte en se cognant contre le moniteur en
cas d'accident
e Ne pas installer le moniteur à un emplacement qui
génerait le déploiement du sac gonflable
e Demander a un technicien expérimenté d'installer le
moniteur
Pour plus de süreté, demander au détaillant qui vous
a fourni le moniteur de procéder à son Installation
Il est recommande de noter, dans l'espace prévu ci-
dessous, les numéros de modéle et de Serie inscrits
soit à l'arrière soit sur le fond de l'appareil, et de con-
server ce manuel comme memorandum de l'achat afin
de permettre l'identification de l'appareil en cas de vol
CY-VM5800U
NUMERO DE MODELE
NUMERO DE SERIE
DATE DE L'ACHAT
VENDEUR
Pendant l'utilisation de l'appareil
o Veiller à ne pas faire tomber l'appareil ni le heurter vio-
lemment étant donné que cela peut provoquer des
pannes voire un incendie
O Précautions à prendre avec le
panneau à cristaux liquides
e Ne pas laisser la surface du panneau à cristaux liquides
dirigée vers le haut
Limites de température de stockage —20 °C à 80 °C
(—4°Fà 176 °F )
Lorsque le panneau a cristaux liquides atteint. des
températures elevees ou basses, des Changements
chimiques se produisent dans le panneau à cristaux
liquides meme qui peuvent eventuellement engendrer
des pannes
Le panneau à cristaux liquides ne doit jamais soumis à
des chocs violents
Lorsque la température est particulièrement basse ou
élevée, l'image sur l'ecran risque de ne pas être nette ou
encore une lente dérive de l'image peut se produire Par
ailleurs, le mouvement de l'image risque d'apparaître
comme étant en désynchronisation ou encore sa qualité
risque d'être affectée dans de telles conditions. || faut
cependant noter qu'il ne s'agit pas d'un défaut du
panneau ni d'une anomalie
Limites de température en service 0 °C à 40 °C
(32 °F à 104 °F)
Des points rouges, bleus et verts peuvent apparaitre sur
le panneau C'est une des caractéristiques du panneau a
cristaux liquides et ceci ne constitue pas une anomafie
Le panneau à cristaux liquides a été réalisé à partir
d'une technologie de tres haute précision et posséde au
minimum 99,99% de pixels d'image efficaces I! con-
vient de savoir que dans 0,0196 du panneau, des pixels
peuvent manquer ou bien étre constamment allumés
Points
CY M5800U
202 21

Panasonic le da la bienvenida a la familia constantemente en aumento de poseedores de productos electrónicos. Nos
esforzamos en proporcionarle las ventajas de la ingeniería mecánica y electrónica de precisión, de una fabricación con
componentes cuidadosamente seleccionados, y de un montaje realizado por personas orgullosas de la reputación que
su trabajo ha cimentado para nuestra empresa. Estamos seguros de que este producto le proporcionará muchas horas
de distracción y, una vez comprobada la calidad, el valor y la fiabilidad incorporados, used también se sentirá orgulloso
de pertenecer a nuestra familia.
(3 Características
o Pantalla panorámica con una relación de aspecto de o Se puede conectar al reproductor DVD (CX-DV700U),
16:9 ideal para ver películas. monitor LCD en color/reproductor CD, DVD (CY-
o Amplio monitor LCD de 5,8" con definición alta de VMD9000U), platina de video y otros aparatos.
280 800 píxeles. i
o Matriz activa TFT (transistor de pelicula fina) para
reproducir fielmente el color.
A Componentes
o Manual de instrucciones ..................... 1 © Hardware suministrado ...... 1 juego (= página 54)
o Mando a distancia ...,...................... 1 © Tarjeta de garantía ..,...................... 1
AI A sn 1
A Indice
Información para su seguridad ........................................... 3
Utilización segura de este producto ...................................... 9
Nombre de los controles ............................................... 46
Preparación del mando a distancia ......................... A MN ees 47
Instalación de la pila, notas sobre la pita, guía de referencia de los controles
Antes de utilizar la unidad de visualización ................................ 48
Selección de entrada ................................................. : 49
Ajuste del aspecto .................................................. .. 50
Aiste del RAD: :: 54 4 ecw 2a sq ERIS a ate ee Ra 51
Ajuste de la visualización .............................................. 52
Nivel del negro, contraste, color, matiz
Guía de instalación ................................................... 54
Procedimientos paso a paso
Conexiones eléctricas ................................................. 57
Precauciones, diagrama de cableado, configuración básica del sistema, cable del freno de estacionamiento, configuración
de sistemas avanzados
Solución de problemas ................................................. 60
Dónde obtener la ayuda del servicio de reparaciones, consejos para solucionar problemas
Mantenimiento ....................................................... 62
Prevención de daños en el exterior del sistema, limpieza pasando suavemente un paño blando
ESBECITICACIOTIBS. icc; cy te oer en Ed EXER at 63
8
GYEVIM5S800U

Utilización segura de este producto
Durante el estacionamiento
e El estacionamiento bajo la luz solar directa puede pro-
ducir temperaturas muy altas en el interior del vehiculo
Permita que se enfrie el interior del vehículo antes de
encender el aparato
* No utilice el monitor con el motor apagado Esto con-
sume energta de la bateria y puede impedir el arranque
del motor
Utilización de ta alimentación apropiada
e Este producto ha sido diseñado para funcionar con un
sistema de bateria de 12 Y con puesta a masa negativa
(el sistema normal en un vehiculo norteamericano)
Utilización de los centros de servicio autorizados
e No intente desarmar m ajustar este producto de alta
precisión Consulte la lista de centros de servicio sum-
inistrada con este producto para solicitar el servicio
necesario
Instalación
e Dónde y cómo se instala este aparato cambia de
acuerdo con el modelo de vehículo pertinente Por lo
tanto, la información contenida en esta quia de insta-
lación ha sido preparada para mstaladores profe-
sionales, no para personas que carezcan de los
debidos conocimientos técnicos
e Asegurese de instalar el monitor en una posicion
que no obstruya la vision del conductor
e Si el monitor ha sido instalado para los pasajeros de
los asientos traseros, estos deben tener cuidado de
que sus cabezas no golpeen el monitor en caso de
producirse un accidente
e No instale el aparato en un lugar donde pueda
obstruir el funcionamiento de una bolsa de aire
e Pida a un técnico cualificado que instale el aparato
La instalación y el cableado requieren preparación y
experiencia
Para su seguridad, pida al comerciante a quien
adquirió el aparato que haga la instalación
Encuentre el numero de modelo y el numero de serie
en la parte posterior o inferior de ta unidad Anótelos en
el espacio de abajo y guarde este manual a modo de
prueba permanente de su compra, para que pueda uti-
lizarlo en el caso de que le roben la unidad
CY-VM5800U
NUMERO DE MODELO
NUMERO DE SERIE
FECHA DE ADQUISICION
VENDEUR
Durante el funcionamiento
e Asegurese de que el aparato no se caiga ni reciba
golpes fuertes porque esto puede causar un fun-
cionamiento defectuoso o un incendio
© Cuidados para el panel de cristal
líquido
e No deje la superficie del panel de cristal liquido mirando
hacia arriba
Gama de temperaturas para guardar el aparato
—4 °F a 176 °F (—20 °C a 80 °C)
Cuando el panel de cristal liquido alcanza temperaturas
altas o bajas, se producen en él cambios quimicos que
pueden causar un funcionamiento defectuoso
e No golpee el panel de cristal liquido
e Cuando la temperatura sea muy fria o muy caliente, la
imagen tal vez no aparezca claramente o quiza se mueva
lentamente Ademas, en tales ambientes, el movimiento
de la imagen puede parecer que no esta sincronizado o
la calidad de la misma puede reducirse Tenga en cuen-
ta que esto no es ningun funcionamiento defectuoso o
problema
Gama de temperaturas para utilizar el aparato
32 °F a 104 °F (0 °C a 40 °C)
En la superficie del panel puede haber puntos rojos,
azules y verdes Esto constituye una caracteristica de
los paneles de crista! liquido y no supone ningün prob-
lema El panel de cristal liquido se fabrica empleando
una tecnologia de alta precisión, y dispone de un
99,99% de pixeles de imagen efectivos Tenga en cuen-
ta que en un 0,01% del panel podrá haber pixeles que
falten o que esten constantemente encendidos
Puntos
ILES
FA
NI5800U)
ee

A SO FOSO
10
Name of Controls
Bright button (BRIGHT)
Used to adjust the screen brightness.
(> page 15)
Picture button (PICTURE)
Used to adjust the display image.
(> page 16)
Aspect button (ASPECT)
Used to select and determine the
ASPECT. (> page 14)
Power button (POWER)
Used to turn the power ON and
OFF. (> page 12)
Remote
sensor
||
Standby/power on indicator
[STAND BY (R)/ON (G)]
When the power is off; red
When the power is on: green
Terminal for
connection cable
(on the left side)
Menu button (MENU)
Used to select the VTR input selection.
(> page 13)
Select buttons (Y, A)
Used to move the cursor.
(= pages 13, 15, 16)
Enter button (ENTER)
Used to determine the
various settings.
(= pages 13, 16)
Screw holes are provided for attaching the height adjuster fitting
(on the bottom side).
[4" (6 mm) unify screw, maximum length of 1 */6" (4.5 mm)]
o This unit does not contain any speakers.
| CAEN |

u m (3 i
Remote Control Unit Preparation a
(Ly
G
Battery Installation (Inserting/Replacing the Batteries) | num battery È
4 Remove the battery holder (included) a
Puli the holder by the position B while pushing position Back side
A in the direction indicated by the arrow
2 Install the battery on the battery holder
Set a new battery properly with its (4-) side facing up as
shown in the figure
3 Insert the battery holder
Push in the battery holder back into its original position
Position B
Battery Notes
Remove and dispose of an old battery immediately
Battery Information
e Battery type Panasonic lithium battery (CR2025) (included)
e Battery life Approximately 6 months with normal use (at room temperature)
Battery holder Position À
Caution:
e Improper use of batteries may cause overheating, an explosion or ignition, resulting in injury or a fire
Battery leakage may damage the unit
o Do not disassemble or short the battery Do not throw a battery into a fire
e Keep batteries away from children to avoid the risk of accidents
e Be careful to the local disposal rules when you dispose of batteries
Control Reference Guide
Point the remote control unit at the remote sensor
Power button (PUR) ———]1- (e) (te) Menu button (MENU)
(> page 12) (> page 13)
(ay
Aspect button (ASPECT) — A)
(= page 14) JE ON ob eis buttons (A, V)
Bright button (BRIGHT) QUE pages 13, 15, 16)
(> page 15) a
OM
Picture button (PICTURE) —)-(P)
(> page 16)
Enter button (ENTER)
(= pages 13, 16)
Ca M3838000 b
+%

e OPM)
12
Before Using the Display Unit
WARNING:
For safe driving, watching TV and video is available only in stopped condition with the
parking brake pulled. "WARNING" will be displayed while the parking brake is not
engaged.
Press [POWER]
The STAND BY indicator lights is green
Press [POWER] again to switch off the power
The STAND BY indicator lights is red
(y
O”
GYeVMS800U

Input Selection
e Select "VIDEO" when a mobile video deck, video camera or mobile DVD player is connected
e Select "NAVIGATION" when a navigation system is connected
Press and hold [MENU] for more than
2 seconds
VTR INPUT SELECT
VIDEO
NAVIGATION
Cv ]L a) vownup SELECT
Default VIDEO
@
Press
[A]
or
[V]
to
select
an
item
(2)
Press
[ENTER]
to
set
VTR INPUT SELECT
VIDEO
NAVIGATION
Cv |[ a) Downup SELECT
(3-1— [MENU] Note
e |f no operation is performed for 10 seconds, the
menu display automatically disappears
TO i A |
8)" ou
er M
(E)-L—IENTERI
Panasonic
[A, V]
CYVM5800U 13
a SOON

Aspect Setting
Press [ASPECT]
o Each time this button is pressed, the display size
changes as shown below
o ASEE
NORMAL FULL ZOOM JUST
NORMAL (Default)
o The conventional display image has a 4 to 3 ratio
of horizontal to vertical
o In this case, a blank area remains on the right and
left sides of the display
FULL
o The screen is extended horizontally as a whole to
the aspect ratio of 16 to 9
o The extension ratio is the same at any point of the
screen
ZOOM
o The screen is fully extended at the normal aspect
ratio of 4 to 3
o The top and bottom of the screen are slightly cut
JUST
o The screen is extended horizontally to the aspect
ratio of 16 to 9
o The extension ratio increases toward the right and
left ends of the screen
e
Ó)
[ASPECT]
OS
FER PICTURE
Note
o In some cases, the picture looks different from the
original one due to your selection of aspect
m
=z
E m 2
Cautions
e This is to remind you that compression or extension of the screen using the aspect ratio (screen mode)
changing function of this product for commercial purpose or viewing/listening by the public could infringe
on the nghts of the author protected by the copyright law
9 |f you expand a normal picture (4 to 3) by using "JUST", "ZOOM" or "FULL" aspect the full of the screen,
you might not see the periphery of the picture, or you might see deformed picture Therefore, use the
“NORMAL” mode to see the original picture as the author intended it
Hn GYEVMS800U

Brightness
Setting
ATN PICTURE
ENTER
[^, v]
Press [BRIGHT].
BRIGHT
1 2
Default: level 4
Press [^] or [V] to adjust brightness to
your preferred level.
BRIGHT
1 3
I — — — — ——— a pe
Darker Brighter
o |f no operation is performed for 10 seconds, the
menu display automatically disappears.
| em | ^
© sorz

Display Setting
Press [PICTURE] @ Press [A] or LV] to select an item
(2) Press [ENTER] to set
BLACK LEVEL
aa ae
pa
Ss
BLACK LEVEL
CONTRAST CONTRAST
COLOR COLOR
TINT TINT
END END
Cv ][ A) Down? SELECT Cv ][ 43) vownue SELECT
Select
BLACK LEVEL
Black Level
Default 0
Setting range —30 to +30
Select
Contrast
CONTRAST
Default 0
Setting range —30 to 430
Select
COLOR
Color
Defauit 0
Setting range —30 to +30
Select
Tint
D | TN || >
Default 0
Setting range —30 to 430
16
CGYEVM5800U
yE
box: PÉ ud... bh d IF dr as

e To return to the regular mode, select "END" and
(2) Press [ENTER] to set then press [ENTER]
e |f no operation is performed for 10 seconds, the
menu display automatically disappears
©) (D Press [^] or [V] to adjust Notes
CONTRAST
*15 muni
[ENTER]
4
Adjust the black level if black and white are
reversed or the screen appears too white because
of the angle of viewing
CONTRAST
+15 — nmmnimnnpooupun
— direction + direction
Decrease the contrast Increase the contrast
between black and white between black and white
COLOR
+15 mimm MTOA Wai
A
— direction + direction
Lighten the depth of Deepen the depth of color
color on the display on the display
[^, v]
[PICTURE]
TINT
£15 — annuo]
— direction + direction
Emphasize red in the Emphasize green in the
color image color Image
FAO
17

© SO ZIMA
18
Installation Guide
sonal injury or death.
O Overview
This product should be installed by a professional
(Please refer to the "WARNING" statement
above )
o Identify and label the car wires
o Connect the car wires to the wires of the power
connector
o Check the operation of the unit
If you encounter problems, please consult your
nearest professional installer
Caution.
o This unit operates with a 12 V DC negative
ground auto battery system only Do not
attempt to use it in any other system Doing
so could cause serious damage
Before you begin installation, look for the following
items which are packed with your unit
o Warranty Card Fill this out promptly
o Panasonic Servicenter List for Service Directory
Keep for future reference in case the unit needs
servicing
o Installation Hardware Needed for monitor set-
ting
GYEVIVIS800U
The installation information is designed for experienced installers and is not intended
for non-technical individuals. It does not contain warnings or cautions of the potential
dangers involved in attempting to install this product.
Any attempt to install this product in a motor car by anyone other than a qualified
installer could cause damage to the electrical system and could result in serious per-
O Installation Hardware
Nof item | Diagram J'y
Connection cord EI 1
(Length 3 m) :
o Clamp connector e

(3 Before Installation
Warning
e Do not install the monitor in a location. which
obstructs driving, visibility or which is prohibited
by applicable laws and regulations
If the monitor is installed in a location which
obstructs forward visibility or operation of the air
bag or other safety equipment or which interferes
with operation of the car, it may cause an acci-
dent
e Never use bolts or nuts from the car's safety
devices for installation
If bolts or nuts from the wheel, brakes or other
safety devices are used for installation of the mon-
Itor, it may cause an accident
e Attach the wires correctly
If the wiring is not correctly performed, it may
cause a fire or an accident |n particular, be sure to
run and secure the lead wire so that it does not get
tangled with a screw or the moving portion of a
seat rail
e Use with 12 V DC negative ground car
This unit is only for use with a 12 V DC negative
ground car It cannot be used in large trucks or
diesel cars which are 24 V DC car If it ts used in
the wrong type of car, it may cause a fire or an
accident
Cautions.
e Use the specified fuse
Be sure to always use the specified fuse If a
fuse other than the specified fuse is used, it
may cause a fire or an accident
e Do not damage the cord by pinching or
pulling it
Do not pull or damage the cord 1f the cord is
not treated properly, it will short out or be
severed and may cause a fire or an accident
O Required Tools
You'll need the following
12V DCtest Electrical tape Slide-cut
bulb pliers
WES
(3 Identify All Leads
The first step in installation is to identify all the car
wires you'll use when hooking up your LCD monitor
As you identify each wire, we suggest that you label
It using masking tape and a permanent marker This
wil! help avoid confusion when making connections
later
Note.
e Do not connect the power connector until you
have made all connections if there are no plastic
caps on the hooking wires, insulate all exposed
leads with electrical tape until you are ready to use
them Identify the leads in the following order
Power Lead
if your car has a radio or is pre-wired for one
Cut the connector wires one at a time from the plug
(leaving the leads as long as possible) so that you
can work with individual leads
E
Turn on the ignition to the accessory position, and
ground one lead of the test bulb to the chassis
Touch the other lead of the test bulb to each of the
exposed wires from the radio connector plug Touch
one wire at a time until you find the outlet that caus-
es the test bulb to light
Now turn the ignition off and then on If the bulb also
turns off and on, that outlet is the car power lead
If your car is not wired for an audio unit
Go to the fuse block and find the fuse port for acces-
sory (ACC), or ignition (IGN)
GYEVM5800U
19

2 SO-FOSN
20
Installation Guide (continues)
(7 Connect All Leads
Now that you have identified all the wires in the car,
you're ready to begin connecting them to the con-
troller unit wires. The connection diagram (= pages
21, 22) shows the proper connections and color
coding of the leads.
We strongly recommend that you test the unit
before making a final installation.
You can set the unit on the floor and make tempo-
rary connections to test the unit. Use electrical tape
to cover all exposed wires.
Important:
e Connect the red power lead last, after you
have made and insulated all other connec-
tions.
Ground
Connect the black ground lead of the power connec-
tor to the metal car chassis.
Power
Connect the red power lead to the correct car radio
wire or to the appropriate fuse port on the fuse
block. NP |
If the LCD monitor functions properly with all these
connections made, disconnect the wires and pro-
ceed to the final installation.
O Final Installation
Lead Connections
Connect all wires, making sure that each connection
is insulated and secure. Bundle all loose wires and
fasten them with tape so they won't fall down later.
Congratulations! After making a few final checks,
you are ready to enjoy your new auto LCD monitor.
(3 Final Checks
1. Make sure that all wires are properly connected
and insulated.
2. Turn on the ignition to check the unit for proper
operation.
If you have difficulties, consult your nearest autho-
rized professional installer for assistance.
«Installation Example»
Warning
o Where and how this unit is installed differs according to the car model concerned. As such, the informa-
tion contained in this installation guide is designed for professional installers and is not intended for non-
technical individuals.
GYEVM5800U