Panasonic Viera TC-P42G15 User manual

Panasonic
Operating Instructions
42"/46"/50" Class 1080p Plasma HDTV
(41.6/46.0/49.9 inches measured diagonally)
Manual de instrucciones
Television de alta definicion de 1080p Yclase 42"/46"/50" de Plasma
(41,6/46,0/49,9 pulgadas medidas diagonalmente)
Numero~O~~d~?~ TC-P42G15
TC-P46G15
TC-P50G15
(See page 8-18)
lit
I0
(vea la pagina 8-18)
II For assistance (U.S.A/Puerto Rico), please call:
1-877-95-VIERA (958-4372)
or visit us at www.panasonic.com/contactinfo
II For assistance (Canada), please call:
1-866-330-0014
or visit us at www.vieraconcierge.ca
•Para solicitar ayuda (EE.UU.lPuerto Rico), lIame al:
1-877-95-VIERA (958-4372)
6visitenos en www.panasonic.com/contactinfo
L\VCHDTM
( English J
1V II (It CAST I™
HOrnl'"
m VII(~ ™
• IMAGE VIEWER
SJi'TM
1:13
Please read these instructions before operating your set and retain them for future reference.
The images shown
in this manual are for illustrative purposes only.
( Espanal )
Lea estas instrucciones antes de utilizar su televisor yguardelas para consultarlas en el futuro.
Las imagenes mostradas
en este manual tienen solamente fines ilustrativos.
1111111111111111111111111111111111111111111111111111111
TQB2AA0823

2
Turn your own living room into amovie theater!
Experience an amazing level of multimedia excitement
'II ~ (~ ~irtkTM
I '4Ur~CAST
I'"
S~ ..
1=1 ...
VIERA Link™ is atrademark of Panasonic VIERA CASPM is atrademark
of
Corporation. Panasonic Corporation. SDHC Logo is atrademark.
HOm.'·
Manufactured under license from Dolby Laboratories.
H'GH·DEf'''''TlON MULT''''ED'.'HTERrllCE
HDMI, the HDMI logo and High-Definition Multimedia Interface Dolby and the double-D symbol are
are trademarks or registered trademarks of HDMI Licensing trademarks of Dolby Laboratories.
LLC.

Enjoy rich multimedia
SD memory card
--[QJ
Camcorder
,~
\ ~ Personal
(~ ~;:omputer
SetTop Box I -[ rOOI
DVD player/
Blu-ray Disc player
18
This product qualifies for ENERGY STAR
in the "Home" setting and this is the setting
in which energy savings will be achieved.
Any modifications to the "Home" setting or
z%other factory default settings
could result in
~
greater energy consumption beyond levels
that
meet ENERGY STAR qualifications.
HDAVI Control™ is a
'I~m
trademark of Panasonic
Corporation.
www.CE.org/safety
Contents
Please read before using the unit
•Safety Precautions·······································4
•Notes····························································7
Quick Start Guide
•Accessories/Optional Accessory····· 8
•Basic Connection
.. ·· ·11
•Identifying Controls 15
•First Time Setup·· 16
Enjoy your TV!
Basic Features
•Watching TV·· .. ··· .. ··· .. ··· .. · · · · ······ .. 19
•Using VIERA TOOLS
21
Viewing from an SO Card 22
•Watching Videos and DVDs · · · 26
•VIERA
CASTTM 28
•Network Camera · · · · 30
•Displaying PC Screen on
TV 32
Advanced Features
•How to Use Menu Functions
(picture, sound quality, etc.) 34
•VIERA
Link™ "HDAVI Control™'' · .. ·38
•Network setting··········································44
•VIERA CAST setting
46
•Lock ·····48
•Editing and Setting Channels ·50
•Closed Caption ..........· ·
.. · · · .. · · .. 52
•Input Labels/Audio Out 53
•Using Timer················································54
•Recommended AV Connections 55
FAQs, etc.
•Ratings List for Lock 56
•Technical Information"
·57
•Care and Cleaning 61
•FAQ .. · .. ·....· · .. ··· .. ·· · · · · · .. 62
•Specifications· ·......· · · · ·64
•Limited Warranty
(for U.S.A. and Puerto Rico only)......
·· ....· .. 65
•Customer Services Directory
(for U.S.A. and Puerto Rico) 66
•Limited Warranty (for Canada) ·67
111111111111111111111111111111111111111111111111111111I
3

Safety Precautions A
~W-A-R-N~I~N~G~:~T~o~re~d~u~c~e~t~h-e~ri~S~k~O~f~e~l~ec~t~r~iC~S~h~O~C~k~, d~o~n~o~t~r~e~m~o~v~e~c~o~v~e~r ~o~r~b~a~C~k~. ~--~ it..
No user-serviceable parts inside. Refer servicing to qualified service personnel. ~
The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a
risk of electric shock to persons.
The exclamation point within
a triangle is intended to
tell the user that important
operating and servicing
instructions are in the
papers with the appliance.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8)
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose
of the polarized or
grounding-type plug. Apolarized plug has two blades with
one wider than the other. Agrounding type plug has two
blades and athird grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your oullet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked
on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments Iaccessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
<Ill
bracket, or table specified by the 10..
manufacturer, or sold with the • l"
apparatus. When acart is used, ~
use caution when moving the cart I ~-
apparatus combination to avoid injury
from tip-over.
13) Unplug this apparatus during lightning storms
or when
unused for long periods
of time.
14) Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord
or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
15)
To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for aClass Bdigital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference
in aresidential installation.
This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in
aparticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on acircuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radiofTV technician for help.
This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC
Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by Panasonic
Corp. of North America could void the user's authority to operate this device.
FCC Declaration of Conformity
Model No. TC-P42G15, TC-P46G15, TC·P50G15
Responsible Party:
Contact Source:
email:
Panasonic Corporation
of North America
One Panasonic Way, Secaucus,
NJ 07094
Panasonic Consumer Electronics Company
1-877-95-VIERA(958-4372)
[email protected]
4
CANADIAN NOTICE:
For Model TC-P42G15, TC-P46G15, TC-P50G15
This Class Bdigital apparatus complies with Canadian ICES-003.

WARNING/CAUTION
I6 WARNING I
Small parts can present choking hazard if accidentally
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects, including
packaging materials and plastic bags/sheets to prevent
them from being played with by young children, creating
the potential risk of suffocation.
• Set up
This Plasma TV may fall and can cause personal injury or
even death if not installed correctly.
To prevent personal injury
or death, follow these warnings:
•
Install the Plasma TV in accordance with the
manufacturer's recommended pedestal or stand,
corresponding hardware and installation instructions.
This Plasma TV is for use only with the following optional
accessories. Use with any other type of optional accessories
may cause instability. The following accessories are
manufactured by Panasonic Corporation.
oWall-hanging bracket (Angled) TY-WK4P1RW
• Be sure to ask a qualified technician to carry out the
installation and set-up.
Two
or more people are required to install or remove the
television.
•
Some wall mounts (wall-hanging brackets) are not
designed to be mounted to walls with steel studs or old
cinder block constructions.
Ask your dealer or licensed contractor to properly secure the
wall-hanging bracket.
•
Do not place the Plasma TV or its stand on a sloped or
unstable surface.
The Plasma TV may fall or tip over.
•Do not support the Plasma TV on a non-specified
pedestal.
•
Do not place the Plasma TV on furniture that can easily
be used as steps, such as a chest of drawers.
• Do not climb or allow children to climb on the Plasma TV
•Place
or install the Plasma TV where it cannot be pushed,
pulled over or knocked down.
• Route all cords and cables such that they cannot be
tripped over or pulled by curious children.
• Do not place any objects on top of the Plasma TV.
Ifwater spills onto the Plasma TV or foreign objects get
inside it, ashort-circuit may occur which could result
in fire
or electric shock. If any foreign objects get inside the Plasma
TV, please consult an Authorized Service Center.
.AC Power Supply Cord
To prevent fire or electric shock:
• The Plasma TV is designed to operate on a120 VAC,
60 Hz
service. Insert the power cord plug as far as it will
go into the wall socket.
Ifthe plug is not fully inserted, heat may generate, which
could cause afire.
• The included power cord is for use with this unit only.
•
Do not use any power cord other than that provided with
this TV.
• Do not handle the power cord plug with wet hands.
•Do not do anything that might damage the power supply
cord.
• When disconnecting the power supply cord, hold the
plug, not the cord.
•Do not use the power supply cord if the plug or cord is
damaged.
Replace the cord or contact your Authorized Service Center
• Handling the power supply cord
• Insert the power plug fully into the socket outlet. (If the
power plug is loose, it could generate heat and cause fire.)
• Ensure that the power plug is easily accessible.
• Ensure the earth pin on the power plug is securely
connected to prevent electrical shock.
o An apparatus with CLASS Iconstruction shall be connected to
apower socket outlet with aprotective earthing connection.
•
Do not touch the power plug with a wet hand. (This may
cause electrical shock.)
•Do not use any power cord other than that provided with
this TV. (This may cause fire or electrical shock.)
• Do not damage the power cord. (A damaged cord may
cause fire or electrical shock.)
o Do not move the TV with the cord plugged in the socket outlet.
oDo not place aheavy object on the cord or place the cord
near ahigh-temperature object.
oDo not twist the cord, bend it excessively, or stretch it.
oDo not pull on the cord. Hold onto the power plug body
when disconnecting cord.
oDo not use adamaged power plug or socket outlet.
• If Problems Occur During Use
• If a problem occurs (such as no picture or no sound),
or if smoke or an abnormal odor is detected from the
Plasma TV, unplug the power supply cord immediately.
Continued use of the TV under these conditions might cause
afire or permanent darnage to the
TV. Have the TV evaluated
by an Authorized Service Center. Servicing
of the TV by
unauthorized personnel is strongly discouraged due to its
high voltage.
•
If water or an object gets inside the Plasma TV, if the
Plasma TV is dropped, or if the enclosure becomes
damaged, unplug the power supply cord immediately.
Ashort-circuit may occur, which could cause afire. Contact
an Authorized Service Center for an evaluation.
16cAUTION I
• Do not cover the ventilation holes.
Doing so may cause the Plasma TV to overheat, which can
cause afire or damage to the Plasma
TV.
•Leave a space of 315/16" (10 cm) or more at the top, left
and right, and 23/4" (7 cm) or more at the rear.
• When using the pedestal, keep the space between the
bottom of the TV and the pedestal or stand surface clear
from objects that may obstruct ventilation.
• When Moving the Plasma TV
• Be sure to disconnect all cables before moving the
Plasma TV.
Moving the TV with its cables attached might damage the
cables which,
in turn, can cause fire or electric shock
•To
prevent an electric shock, disconnect the power
plug from the wall outlet as a safety precaution before
carrying out any cleaning.
5

Safety Precautions (Continued)
• Transport only in upright position
Transporting the unit with its display panel facing upright or
downward may cause damage to the internal circuitry.
•
Using a dry cloth, clean any dust from the power supply
cord and plug regularly.
Build-up of dust
on the power cord plug can increase
humidity, which might damage the insulation and cause afire.
This Plasma TV radiates infrared rays;
therefore, it may affect other infrared communication
equipment. Install your infrared sensor
in aplace away from
direct or reflected light from your Plasma
TV.
The TV will still consume some power as long as the power
supply cord is connected to the wall outlet.
CI~~.
www.CE.org/safety
• Display panel is made of glass. Do not apply strong force
or impact to the display panel.
This may cause damage resulting
in injury.
•The TV
is heavy. TV should be handled by 2 or more
people. Support as shown to avoid injury by the TV
tipping or falling.
6
CEA CHilD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or
installed according to the manufacturer's recommendations. Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause
personal injury or even death.
The consumer electronics industry (of which Panasonic
is amember) is committed to making home
entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety
guidelines:
TUNE INTO SAFETY:
•One size does NOT fit all. Follow the manufacturer's recommendations for the safe installation and use
of your flat panel display.
•Carefully read and understand all enclosed instructions for proper use ofthis product.
•Don't allow children to climb
on or play with furniture and television sets.
•Don't place flat panel displays on furniture that can easily
be used as steps, such as achest of drawers.
•Remember that children can become excited while watching aprogram, especially on "larger than life"
flat panel displays. Care should be taken to install the display where
it cannot be pushed, pulled over,
or knocked down.
•Care should
be taken to route all cords and cables connected to the flat panel display so that they
cannot
be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WAll MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:
•Use amount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such
as Ul, CSA, ETl).
•Follow all instructions supplied by the display and wall mount manufacturers.
•If you have any doubts about your ability to safely install your flat panel display, contact your retailer
about professional installation.
•Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not
designed to
be mounted to walls with steel studs or old cinder block construction. If you are unsure,
contact aprofessional installer.
• A minimum
of two people are required for installation. Flat panel displays can be heavy.
Panasonic recommends that aqualified installer perform the wall-mount
installation. See page 5.

Notes
•Do not display astill picture for along time
This causes the image to remain on the plasma screen
("Image retention"). This is not considered amalfunction and is not covered by the warranty.
To prevent "Image retention", the screen saver is
automatically activated after afew minutes if no signals are
sent or no operations are performed. (p. 63)
Typical still images
•Channel number and other logos
•Image displayed in 4:3 mode
•SD Card photo
tU Video game •Computer image
•Set up
(I Do not place the unit where it's exposed to sunlight or other bright light (including reflections).
<t Use of some types of fluorescent lighting may reduce the remote control's transmission range.
7

Accessories/Optional Accessory
Accessories
~ Check you have all the items shown.
oCleaning cloth
m
~~
1it.~" ....• '.' .•.. § ....
. .m
How to assemble (p. 9)-----,
oPedestal
•TBLX0091
(TC-P42G15)
It TBLX0092
(TC-P46G15,
TC-P50G15)
oBatteries for the
Remote Control
Transmitter (2)
• AA Battery
Accessories
DAC cord
oRemote Control
Transmitter
•N2QAYB000322
oOperating Instructions
oQuick Setup Guide oProduct Registration Card (U.S.A.)
oCustomer Care Plan Card (U.S.A.)
Wall-hanging bracket
(angle)
...... TY-WK4P1 RW
"" .
""=
,~
-
( Note)
• In order to maintain the TV's performance and safety, be absolutely sure
to ask your dealer or alicensed contractor to secure the wall-hanging
brackets.
•Carefully read the instructions accompanying the plasma TV stand or
pedestal, and be absolutely sure to take steps to prevent the TV from
tipping over.
•Handle the TV carefully during installation since subjecting it to impact
or other forces may cause its panel to crack.
oInstalling the remote's batteries
( Caution)
• Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
• Do not mix old and new batteries.
It Do not mix different battery types
(such as alkaline and manganese
batteries
).
It Do not use rechargeable (Ni-Cd)
batteries.
•Do not burn or break batteries.
8

Attaching the pedestal to TV
.Assembling the pedestal
•Fix securely with assembly screws ® .(Total 4screws)
I; Tighten screws firmly_
.t
»
()
()
CD
(/)
(/)
o
....,
co"
(/)
-
o
""0
..-+
o'
:::J
Q)
»
()
()
CD
(/)
en
o
-<
• CD or ®is printed at the
bottom
of the poles.
Base (1)
Accessories
Assembly screws
(4 of each)
® cmmrr(O
M5 x18 (Silver)
@ lOli1i!!i!i!!I(O
M5 x25 (Black)
Poles (2)
•Fix securely with assembly
screws
@. (Total 4screws)
Bottom view
/Front
~~:::::...-_- Hole for pedestal
installation
Base
I~----Pole
-J
!'
, ,
Pole :
® ',,
,,
, ,
•Carry out work on ahorizontal and level surface.
.. Tighten screws firmly.
.Set-up
( Warning)
Do not disassemble or modify the pedestal.
•Otherwise the TV may fall over and become damaged, and personal injury may result.
(
Caution)
Do not use any other TV and displays.
•Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
• If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
•If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the
TV, and it might fall over and become damaged, and personal injury may result.
9

Accessories/Optional Accessory (Continued)
AC cord connection
rT~ attach
I CD
I
Insert it firmly until the
tabs on both sides click
into place.
To remove
Keep pushing both
side snaps and pull
down
Reference of connection
10
Antenna terminal
~
teD
1),®
~ Firmly tighten by hand.
Pin terminals
@@@~
red blue green ~
gr~
~ Match colors of plugs and terminals.
f& Insert firmly.
HOMI terminal
[§~
•Insert firmly.

Basic Connection
Exam Ie 1Connecting Antenna (To watch TV)
TV
VHF/UHF Antenna
!J!l NTSC (National Television System Committee):
Conventional broadcasting
!J!l ATSC (Advanced Television Systems Committee):
Digital TV Standards include digital high-definition television
(HDTV), standard-definition television (SDTV), data broadcasting,
multi-channel surround-sound audio and interactive television.
--- -~ ,~.- ~- --_ .. _. -""'----' ~
To connect the antenna terminal and Cable Box
AC 120 V
60 Hz
Ac""-JcLJ.:"or'iitt-
d
~1,"o"'1
(Connect after all the
other connections
have been made.)
u
*See page 10
(AC cord
connection)
Back of the TV
I
I
-~. j
or
(If no Cable Box)
VHF/UHF A~~~na li
1
1
L ANTIN ANT OUT .1
_._._.- .' =-=::v~ ~"- )
/ .' ...• .,
rs::@ ~I> "'= I
Cable Box
Cable Box/Cable
.. You need to subscribe to acable TV service to enjoy viewing their
programming.
.. If using aCable Box, set the TV channel to CH3 or CH4 for regular cable.
I) You can enjoy high-definition programming by subscribing to ahigh-
definition cable Service.
The connection for high-definition can be done with the use
of HDMI or
Component Video cable.
(p. 14)
•
To view high-definition programming select the correct video input. (p. 26)
( Note)
eNot all cables and external equipment shown in this book are supplied with the TV.
•For more details on the external equipment's connections, please refer to the operating manuals for the equipment.
fji When disconnecting the power cord, be absolutely sure to disconnect the power cord plug from the wall outlet first.
llJj For additional assistance, visit us at: www.panasonic.com
www.panasonic.ca
11

Basic Connection (Continued)
Exam Ie 2 Connecting DVD recorder (VCR) (To record/playback)
TV AV
Equipment 0/HF/UHF Antenna 1
(e.g. DVD Recorder i Jt I
or VCR) I
c=:::c - 000 o~ I
~ . ~._ ----.J
DVD Recorder
Ifthe source has ahigher resolution signal (480p/720pl
1 080i/1 080p), connection can be made with the use of
aComponent Video or HDMI cable.
(p. 14)
VCR
Connection can be made with the use of an RF cable
and Composite Video/S Video cable. (p. 14)
,'~ ...... 'f' ,~ ~,;:~~< ~ ~ <
.To 'connect the antenn.a terminal and DVD recorder or VCR
",' "'
ANTIN
[00-
~ B ~'-----::~
ANT OUT )
u
*See page 10
(AC cord connection)
AC Cord
AC 120 V
60 Hz
El
12
AV Equipment
(e.g. DVD Recorder or VCR)
(with TV tuner)
Connecting TV and AV equipment
Please refer to ® - @on p. 14

Exam Ie 3Connecting DVD recorder (VCR) and satellite receiver
TV DVD Recorder
or
VCR
Satellite
n.··
Receiver~
You can enjoy high-definition
programming by subscribing to
high-definition satellite service.
Connection can be done with the
use
of HOMI or Component Video
cable.
(p. 14)
VHF/UHF Antenna
AC Cord
AC 120 V
60 Hz
El
•
CO
OJ
CJ)
o'
o
o
:::J
:::J
CO
()
.....
0'
:::J
-=r~
«
+ +
00
«
00
;u;u
COCO
()()
00
..., ...,
0. 0.
COCO
..., ...,
00
..., ...,
«
00
;U;U
..........
+
(f)
OJ
.....
CO
Connecting TV and AV equipment
Please refer to ® - @on p. 14.
DVD Recorder or VCR
(with TV tuner)
8 8 1 -@_ -------..",
A._N_T_I_N_A_N-.T ou~
Satellite Receiver
(
Note)
•For details of external equipment connections, please refer to the operating manuals for the equipment.
13

Basic Connection (Continued)
AV cable connections
or
or
~
~
.g. DVD Recorder
AV Equipment
e.g. VCR
AV Equipment
~
e.g. DVD Recorder
AV
Equipment
~
" - >' '!"C'," "--:i\;'.-
e.g. Blu-ray Disc
player
AV Equipment
~
~
e.g. Blu-ray Disc player
SVIDEO
OUT
AUDIO
........ ({i)/ OUT
red red
"0
L
__ Iial t
white
~
white
Jwhite
AUDIO
red 0R
OUT
~!)
red red
-~. ~
green 0Y
~_.'
green green
..
0
Pa
COMPONENT
blue blue
!/ VIDEO OUT
blue
0
PR
red red red
c:::f
0
\ ..... r!
yellow
~
yellow yellow e
I
:> 0L COMPOSITE
white white
~hite OUT
0R
red red red e
white
red
,-----------------
,--------------------~II .. ~
,--------------
@ To use COMPOSITE terminals
© To use SVIDEO terminals
.------------------
I
---I------~--~.
- - - II - - - ---- ~ - - - • - - - - -
R : AUDIC: ·1~IDEOlp."~'~
®> ~1~ ~ 0--.~-~-
~ 1!i. r1M;~".
I
•Recorders may also be connected to COMPOSITE or SVIDEO terminals. (see below)
•Connecting to HDMI terminals will enable you to enjoy high-definition digital images and high-quality sound.
~ The HDMI connection is required for a1080p signal.
lJI For "VIERA Link™ connections", please refer to p. 39.
®To use COMPONENT terminals
® To use HDMI terminals
[n J~y - ~ O ~~ __ ~~T
14
( Note)
•Some programs contain acopyright protection signal to prevent recording.
•When the copyright protection program is displayed. do not connect the other TV monitor through aVCR. Video signals fed
through VCRs may be affected by copyright protection systems and the picture will be distorted on the other TV monitor.
•For more details on the external equipment's connections, please refer to the operating manuals for the equipment.

Identifying Controls
TV controls/indicators
15
••
OJ-
me..
ClJCD
_.:::J
(")!::!:
0'5
O:::J
:::JCO
:::J
O
~O
!::!: :::J
o~
:::Jo
...-... CIJ
~
()
m
rr
CD
(")
o
:::J
:::J
CD
U
o'
:::J
CIJ
----
HDMI input 3connector
PC connector
Operates the Favorite channel list
function.
(p. 20)
Selects Audio Mode for TV viewing (p. 19)
'--- Use for digital channels. (p. 19)
'--- Selects/OK/Change
'---- Returns to previous menu
Back of the TV
---- Channel up/down
1:----- Numeric keypad to select any channel
(p. 19) or press to enter alphanumeric
input
in menus.
(p. 18,26,30,42,44,46,48,50,53,54)
:---- Displays or removes the channel
banner
(p. 20)
Exits from menu screen
=====---- Displays Main Menu (p. 34)
Displays VIERA CAST screen (Home
screen)
(p. 28)
Displays VIERA TOOLS
(p. 21)
[Video Input 2connectO'
Changes the input mode
Chooses menu and submenu entries.
SO card slot
Displays the Main-
menu.
~elects channels {
In sequence
Power indicator
(on: red, off: no light)
C.A.T.S. sensor
Plasma C.A. T.S. (Contrast Automatic
Tracking System). (p. 34)
Remote control
Sound mute On/Off
===::----- Closed caption On/Off (p. 19)
External equipment operations
(p.43)
Switches to previously viewed channel---:::::I:
or input modes.
Changes aspect ratio
(p. 20, 57) __ ---J
Volume up/down --.J
Switches to input terminal-----'
that has "GAME" label. (p. 26)
VIERA Link menu
(p. 42-43) ..J
Displays Sub Menu (p. 19, 36) __ ---J
Colored buttons--------~
(used for various functions)
(for example,
p. 18, 22, 42)
Changes the input mode
(p. 26)
(
Note)
•The TV consumes alimited amount of power as long as the power cord is inserted into the wall outlet.
•Do not place any objects between the TV remote control sensor and remote control.
Front
of the TV

First Time Setup
"First time setup" is displayed only when the TV is turned on for the first time after the power cord is
inserted into awall outlet and when "Auto power on" (p. 36-37) is set to "No".
rc-- (j)select
...... or
You are selecting the mode for store demonstration
Yes ~
,~~.~ CDselect
• .(~'C •• _~
;;i~\:~ ... ,
'fiFty k
. '.. @o
Please confirm your selection (Home) before pressing OK button.
ANT/Cable setup
•If you select "Store" by mistake in @, confirmation screen will be
displayed.
Networksetting
VIERACAST setting
Clock
Input labels
~/e+ <D,eleCl
"'~@Ok
•Select "No" and return to previous screen (g).
II Ifyou select "Yes", Screen enters store demonstration mode.
To display the "Please select your viewing environment" screen again as
shown above and select "Home", do one
of the following:
•Press and hold down the front POWER button.
•Unplug the TV and plug it again.
First time setup
Language
Please select your viewing environment.
Store
Language
___ Espallol Fran~ais
IANTinl
Cable: Cable TV
Antenna: Antenna
Not used: Skip TV tuning
.goto
Select "Not used" when no wire is connected to the "Antenna/Cable" terminal.
4) Typical when Cable/Satellite box is connected to aTV input.
t~ Prevents accidental tuning to an unavailable signal.
®Select "ANT in"
Auto channel setup
G) Select "ANT/Cable setup"
/~~
c(\\ ... (g)next
~)
iv----L- (Dselect
®Be sure to select "Home"
*This setting will be skipped next time if you select "Home".
G) Select your language
Turn the TV On with the POWER button
POWER
•Press to return
to the previous
screen
RETURN
ED
•Press to exit from
amenu screen
EXIT
•
16

•
"
....,
en
.....
=1
3
CD
(f)
CD
.....
C
"0
VIERA CAST setting (p. 46-47)
Network setting
(p. 44-45)
Start scanning the channels
•Available channels (analog/digital) are automatically set.
All channels: Scans digital and analog channels
Analog only: Scans Analog channels only
Digital only: Scans Digital channels only
Auto program
Progress 8%
Number of analog channels 10
Numbe, of digital channels 0
Press RETURN
to quit.
-.RETURN '@
VIERA CAST setting
~e~ rosel
ee
'
:1.\/ ®ok
•If OK is not pressed after selecting "Apply", the channels will not be saved.
The channel will be saved when no operation is performed for 60 seconds and
the "Manual program" menu will also exit automatically.
•If you perform scanning more than twice, previously saved channels are erased.
@ Confirm registered channels
//~ G)select "Apply"
@ t)
k®Ok
@ Select scanning mode (ALL channels/Analog only/Digital only)
./~
',q @ p'J ®ok
I
• ~ ~ G)select
@ Select "Auto program"
/~
C~. ®next
~ ~j
. 0~ G)select
•Pre'ss to exit from
a menu screen
EXIT
••
( NottD
• To change setting
(Language/
ANT/Cable setup/
Network setting/
VIERA CAST setting/
Clock/Input labels)
later, go to Menu
screen
(p. ~~6)
17

First Time Setup (Continued)
Label: [BLANK] SKIPNCR/DVD/CABLE/SATELLITE/DVR/GAME/AUX/RECEIVER/
COMPUTER/Blu-ray/CAMERAlDVD REC/HOME THTR/MONITOR/MEDIA
eTR/MEDIA EXT/OTHER
I Mode I
Manual: Adjust the clock manually
(Year/Month/Day/Hour/Minute)
Auto: The clock is adjusted
automatically via Internet
service.
Only available when the TV
is on anetwork.
+ Set "Network setting" and
"VIERA CAST setting" first.
(Time zone/DST)
I Year ISelect the year
I Month ISelect the month
IDay ISelect the day
I Hour IAdjust the hour
I Minute IAdjust the minute
ITime zone I
Select your time zone.
(EST/CST/MST/PST/AKST/
__ HST/NST/AST)
I DST ISet DST (Daylight Saving
Time) setting. (On/Off)
On: Advances the clock one
hour from the time is set
according to the time zone.
...... <;<V4.
~-~
3 OK m:l~~
Scll'<;t eRt':IURN ~A2~
mCiil.
o ABC atK .4 De1c(
Switches Input mode alphabet to
numeric
~(Dselect
': G i@set
~;!\~;,.: j
or
DlfJlBI
mamll
f1llmUIl
a
• ~®set
"(Dselect
item
,~
'." @~) @next
0~ OK "
<i!" J
1~';'. /
;t;~ (Dselect
Set the Input labels
/~
!, .Cc\T)@next
1$"~fF.
". J(Dselect
Tlmezone Est
CST On
CD Manual setting
®Auto setting
CIiI
Mode
:.. 1'-
•
•
•
•Press to exit from
amenu screen
EXIT
•
1 @. 2ABe 3DEF
4GH' 5JKL 6MNO
7 PORS 8TUV 9wxvz
( Note)
•About broadcasting
systems
Analog (NTSC):
Conventional
broadcasting
Digital (ATSC):
New
programming
that allows
you to view
more channels
featuring
high-quality video
and sound
18

Watching TV
Connect the TV to acable box/cable, set-top-box, satellite box or antenna cable (p. 11-14)
To watch TV and other functions
example: CH15-1: n Ran
•To directly input the digital
channel number
aWhen tuning to adigital
channel, press the button to
enter the minor number
in a
compound channel number.
(
Note)
INPUT
•If the mode is not TV, press. and
select
TV. (p. 26)
or
(TV)
( Note)
•Reselect "Cable" or "Antenna" in "ANT in" of "ANT/Cable setup" to switch the
signal reception between cable TV and antenna.
(p. 16, 51)
.Iftj The channel number and volume level remain the same even after the TV is
turned off.
Audio track 1 of 2
(English)
\II Analog mode
Press SAP to select the desired audio mode.
•Each press of SAP will change the audio mode. (Stereo/SAP/Mono)
(TV)
Select a channel number
Turn power on
POWER
1=
".
':' :
'j up
:' jor
i
:: down
•Press SUB MENU to show sub menu screen. (p. 36)
This menu consists of shortcuts to convenient functions.
SUB
MENU
• Switches Closed caption mode On or Off
cc
•Select Audio Mode for watching TV
SAP 111 Digital mode
Press SAP to select the next audio track (if available) when receiving adigital
channel.
19

Watching TV (Continued)
.Other Useful Functions (Operate after @)
Clock
Sleep timer
remaining time
Aspect ratio
•480i, 480p: FULLIJUST/4:3/Z00M
•1080p, 1080i,
nop: FULLlH-FILLlJUST/4:3/Z00M
Station
identifier
Closed caption
~·)'O~.······T
/ •.••.. 3
o 01
•FAVORITE
Channel numbers registered in Favorite are displayed on the favorite tune
screen. Select the desired broadcast station with the cursor
or use number
buttons. (see below)
•Press FORMAT to cycle through the aspect modes. (p. 57)
FORMAT
8
FAVORITE
!!
•Displays or removes the channel banner.
!Channel
Favorite Feature
Changes the page forward/backward
Press repeatedly to change between
pages(1/3, 2/3, 3/3 or exit)
Favorite channels 1/3
.. .--
o
..
IDI
Favorite channels 1/3
.. .--
o
..
IDI
2Select the channel
3Set Favorite channel
.Use Favorite Feature
1Display "Favorite channels"
FAVORITE
!!
select the list number
(to save the channel
without pressing OK)
Set favorite 1/3
.. .--
o
..
IDI
Set favorite 1/3
.. .--
o
..
IDI
3Set the displayed channel
.~..... • ~ (Dselect the list
number
@~
..• ~ (g)save the displayed
..-- channel
or
OIfJ1Oll
9Imlm!
fltOl~
o
Delete afavorite channel
. '~ Ij)selec'
.~ rc;~)"
,; ~~ (g)delete
'':'.i.~ (while holding down)
2Select "Set favorite"
.Set Favorite Feature
1Display the SUB MENU.
SUB
MENU
~
20