Panasonic KX-T3155A User manual

Panasonic
L
MODEL NUMBER
KX-T3155A

Thank you for purchasing the Panasonic 2-Line Telephone.
Contents
Location of Controls ............................................... 2
...................................................... Preparation 3
Manual Dialing and Receiving
............................. i .... .>a:? . <. . -, 6
' ..
.....
. .
1 I.* .
......................................................
Hold : ..... 7
.................................................
Automatic Dialing 9
................................................
Storing and Dialing 10
Hands-free ...................................................... 14
...........................
Use of Secret and Hyphen Button Features
15
Adjusting Time ................................................... 16
Setting Alarm .................................................... 17
.............................................
Liquid Crystal Display 18
Selection of Central Office Llne (C.O.L.) Selector ....................... 19
...................................
Selectionof Line Mode Selectors
19
.............................................
Troubleshooting Guide 20
................................................
Battery lnstallatlon 21
Wall Mounting .................................................... 22
Others .................................................... Back Cover .
................................................
ACAdaptor Backcover
r Enclosures \
.............
Telephone line cords .......... Two AA size batteries Three
..................... ......................
Handset One Screws Two
................. .....................
Handset cord One Washers Two

MemoryCard LiquidCrystal
You canalso use the reverse (LC)Display
side for writing.The
inslruclionfor storing Mernory
Slalion
numlwrsintomemory are
printedon the rnemory card.
Recall Selector -.
@Lower station
Button
Redial Button
(forspeeddialing) Pausel %ve
Bulton
Mute Button
and Indicator
SP-PHONE Button
and Indicator
r-
Function Position on the Liquid Crystal Display
"'"'''''''''''''''''''''''''''''''''''
LI3oughlengthof
limo that you speak
I '
This display isdifferen1 from real clisl,l~~y.
I

Preparatiori
@ To placethe SpeedDialer Name Cardontotheunit.
1 . Turnthe unitover asshown.
Guide rails,
2 Placethe Name Cardintothe guide railsfacing the bottom of the unit
while curvingthe carda little asshown.
@ Connectas shown.
When you use an optional AC
Adaptor;
DC Jack
, for optional AC Adaptor
If your speakerphone volume is
abnormally low, the oplional AC
adaptor KX-AO9BA will improve the
To Telephone Line volume level.
/Fasten the cord to the holde:
as shown.
Removethe attachingstand.
See page
22.
DC Jack
\

@ Ringer Volume Selector; Set to LLHIGHw.
LOW: The ringing sound will be low.
OFF: The telephone will not ring.
Select each line.
@ DialingMode Selector: Set to "TONE".
If dialing cannot be done, sel to "PULSE".
Confirm use of each line.
Pulse-or-tonedialing capability.
@ insert the batteries (Included).
For further details, see page 21.
@ C.O.L. Selector; Set to "LlL2".
For further details, see page 19.
@ RecallSelector: Set to "E RE" or "T BR".
(dopending on PBX type)
E RE ... for PBX earth recall facility.
T BR ... for PBX timed break register recall
facility.
@ Llne Mode Selectors; Set to "A".
Select each line.
For further details, see
page 19.

Preparation (cont.)
@ Select the Display's contrast.
Choose the best display intensity.
: Low intensity
: Middle intensity Press the Program Button unlil
a beep is heard.
: High intensity
n mums (1
The Display will show
_ - _ _ _ _ _ _ _ .
@ Adjust the time.
The Display will blink when first powered on.
For further details, see page
16.
'DO not use rechargeable (nickel-
3
cadmium) batteries.
They are partially different in shape
and performance and may fail to
ensurethe functionthus may damage
the unit.
programming and speakerphone
(hands-free) operation will not
function.

Manual Dialing an+ci Receiving --., rn
Make sure the Conference button Is released.
When the unit is unused, the LiquidCrystalDisplay will show the present time only.
'f Select the lino. 1 Sslct the line.
,, : lln red Indic,
.c, '*
D (ore). c;u!ckiy .)
Prsnt
2 Liftthe handsel &I. press
The Linelndicatorwill light red.
2 Lift the and talk.
Ll
The Display will show the
DIOI
present time and the length of
time that you speak.
a The Displaywill show the phone
number in order
of pressing the
Dialing button.
For hands-freeope1
cc
.3 SP-
4 When tho other party answers,
PtiONE button instead uf ;)lo i ~arldset.
start talking.
The Display will show the Exatnplo:
present time and the length of
time that you speak.
IM l
Pro11
5 Whenyou finish. hang up
the .
I If you can no! dial in the tone mode,
I If the balisriosare no1installed,
switdi Ihe U~uiirly Mode Seloclor to hands-freeoperalion will riot
tho
"PULSE mode. See "Set to
funclion.
TONE" on page 4.
- ~ - - -~ - ~ ~ ~~ ~~
*1111-
If the Mute Indicator lights when speaking, press the 1 button.

Manual Dialing and Receiving (cont)
If the number dialed is busy,
a The Dlsplaywill show "
andthe redialednumber. Also itwill
show the present tlme and the
length of time that you speak.
e Depressing the Redlal bunon
onablas you to redial once.
LINEINDICATOR:
Off ..................... Line is free
Flashing
red
........ Incomingcall arriving
Redon ................. , Line inuse
Greenon .......... Call ison hold
Example:
....... Call inprogress. Line I
a The Line 1 Indicatorwill lightgreen.
Line I isnow onhold.
a You hayhang up the
wa
Example:
........ Call isonhold Line
1
1 . If thehandselIsoff-hook
Do
Pnrr
. If the handsetisonthecradle
lilt the^+^ 0
'Itrl .
Pros / \
Ih greenLine
lndicalcnbullm
I
a Inthe hands-freemode;
-
/ the green Line \
2 Start talking.
To releaseaholdusing another
telephone connectedonthe same line:
Liltthe a of the olhir telephone.

Example:
Callinprogress
. . . . . . . Line 1
Newcall" . . . . , , , . , Line 2
Pnrr
HOL 0
Line 1 isnow onhold.
2 0, and make or
Pr0ss
receive anew call.
Example:
Callisonhold . . . . . . , . Line 1
Newcallisinprogress . . . . Lino 2
Line 2 isnow r
e Line 1 isstill L.
Line 1 is returnedintottie conversation.
Line 2 isstillonhold.
3 Whenthe call is finished onLine 2,
Press
Example:
The newcallisterminatedand Call ison hold
. . . . . . . Line 1
the callonhold is returnedinto Newcall
is inprogress . . . . Line 2
the conversation. '
and talk.
Prers
4 To terminate lhe call, hang up.

Automatic' Dialina
SpeedDlallng (20 memory stations):
There are
20 memorystations(for SpeedDialing),eachstationiscapableof storing
16 digits.Eachmemorystationcanbe accessedbydialingtwodigitsonthe dialpad.
One-TouchDialing
(28 memory stations):
There are
14 memorystations (for One Touch Dialing),eachmemory stationbutton
consistsof two functions, they are upperand lowermemorylocations. Eachlocation
'
(Upper+Lower) iscapableof storing 16 digilseach.
BehindPBX
If your extensionisplacedbehind
Be sure the handset ison the cradle,
PBX system, enter the LineAccess
the SP-PHONE button
is off and the No. to gainaccessto an outside line.
batteries are installed
(See page 21.)
Exam~le:
1
,QM until a beep is heard.
-
Press
The Display will show
I* - I,
---------- .
2 Storing phone number.
Speed Dialing
For eachstationNo., dial
2 dlgits.
Example:
Press Station no.
(Use Dialingbutton)
*I. auto
-
Phone numberscanbestoredinto
memory stations
am to
following the above procedure.
Pre'l stiltion no. Line
(Use Dialingbutton) ~cces5
The Display will show " 3P"
and the phone number.
Or, you may use the MemoryStation
buttoninsleadof the Speeddialing
number.
One-Touch Dlallng
Prsss the Memory Station button
Instead of the dialing buttons and
repeat the above procedure.
After storing all the numbers,
PIIOORIM
Press
Station
bullon \ button
auro
Press the Lower button first for
storing the number in the lower
The Display will show the
present time.
Beforestoring numbers,confirm
that eachtelephone line isset to the
correctdialing mode.
To change
a storednumber:
Follow the procedureof the
"Storing Phone Numbers".
memory station.
-9-