Panasonic CT-36G33 User manual

Panasonlc
Color Television
Operating Instructions
CT-27G33 CT-32G33
CT-36G33
_ TQB2AA0260
PRINTEO IN MEXICO 80306

TABLE OF CONTENTS
Table of Contents
Congratulations ........................................................ 2
Customer Record ..................................................................... 2
Care and Cleaning ................................................................... 2
Specifications ........................................................................... 2
Installation ................................................................. 3
Television Location................................................................... 3
Optional Cable Connections ..................................................... 3
AC Power Supply Cord ............................................................ 3
Cable /Antenna ........................................................................ 3
Cable Connection ..................................................................... 3
Antenna Connection ................................................................. 3
Optional Equipment Connections ............................................. 4
To Audio Amplifier .................................................................... 4
Audio Adjustments ................................................................... 4
Picture In Picture (PIP) Operation ........................... 5
With /Without a VCR and Cable Box ...................................... 5
With a VCR - No Cable Box ................................................... 6
Main Menu ................................................................. 7
ACTION Button ........................................................................ 7
CH /VOL Buttons ..................................................................... 7
Main Menu Feature Chart ......................................... 8
Special Features ..................................................... 10
Languages .............................................................................. 10
Geomagnetic Correction ........................................................ 10
Timer ...................................................................................... 10
Sleep Timer ............................................................................ 10
Program Timer ....................................................................... 11
CH CAP (Channel Caption) .................................................... 12
LOCK ...................................................................................... 12
Game Guard Lock .................................................................. 12
Unlocking Game Guard .......................................................... 13
Troubleshooting Chart ........................................... 14
[]

CONGRA TULA TIONS
Congratulations
Your new TV features a solid state chassis that is designed to give you many years of
enjoyment. It was thoroughly tested and tuned at the factory for best performance.
Customer Record
The model and serial number of this product are located on the back of the TV. You should note
the model and serial number in the space provided and retain as a permanent record of your
purchase. This will aid in identification in the event of theft or loss. Product registration is
available at www,prodreg.com/panasonic.
Model
Number
Serial
Number
Care and Cleaning
Screen (Turn TV Off)
Use a mild soap solution or window cleaner with a soft clean cloth. DO NOT USE
ABRASIVECLEANERS.
Avoid excessivemoistureand wipedry.
Cabinet and Remote Control
[3 For plastic cabinets and Remote Control, use a soft cloth dampened with water or a mild
detergent solution. Avoid excessive moisture and wipe dry.
0For wooden cabinets, use a soft cloth and an occasional coat of furniture polish to preserve
the finish.
0 Do not use benzene, thinner or other petroleum based products.
Specifications
Power Source
CT-27G33 CT-32G33 CT-36G33
_annel Capability - 181
2 Video Input Jacks
2 Audio Input Jacks
To Audio AMP Jack
S*VHS Input Jack
120V AC, 60Hz
IVHF-t2; UHF_$6; Cable,il 3
' Ivp-p, 75 Oh'ml 'Phono Jack Type
500mV RMS 47K Ohm
0-2.0V RMS 4.7K Ohm
S-Vide0 (Y-C) Connector
Specifications are subject to change without notice or obligation,
IB

INSTALLA TION
Installation
Television Location
This unit is intended to be used with an optional stand or entertainment center. Consult your
dealer for available options.
OAvoid excessive sunlight or bright lights, including reflections.
[] Keep away from excessive heat or moisture. Inadequate ventilation may cause internal
component failure,
£3 Fluorescent lighting may reduce Remote Control transmitting range.
[] Avoid magnetic equipment, includingmotors, fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used between components. For best results:
[] Use 75-ohm coaxial shielded cables.
[] Check type of output and input connectors on your components.
O Determine required cable lengths.
AC Power Supply Cord
CAUTION: TO PREVENTELECTRIC SHOCK,MATCHWIDE BLADE OF PLUGTO
WIDE SLOTOF AC OUTLETAND FULLY INSERT. DO NOT USE A PLUGWITHA
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE. FOR SOME MODELSTHAT ARE
NON-POLARIZED, THE USE OF AN AC ADAPTORCONNECTORMAY
BE NECESSARY.
Polarized plug
Cable /Antenna
For proper reception,either a cable or antenna connection is required•
Cable Connection
Connect the cable supplied by your local cable company•
Note: A cable converter box may be required for proper reception.
Check with your local Cable company for compatibility
requirements•
Antenna Connection
Incoming Cable from
Cable Company
75 Ohm VHF/UHF
on back of TV
For proper reception of VHF/UHF channels, an external antenna is required• For
Incoming Cable from
Home Antenna
best reception an outdoor antenna is recommended•
Antenna Mode must be set to TV in the SET UP menu.
_Cable Preset
Cable Mode is preset at the ractory. Antenna
users must change to Antenna Mode in the Set
I Up Menu.
[]

INSTALLA'I ION
Optional Equipment Connections
VCR's, video disc players, video game consoles, and DSS equipment can also be connected tothe
video inputs. See the optional equipment manual for details.
TERMINALS ON SACK OF TV VCR
L @ @@ L.1_',,-.I, .-b'_F_,L I
,oo,o I: OOTPOT,
{., @o ,
TOAUDI 0 2_ _INPUT IJ _ _ -- _ ,.I
"AMP Jl CABLES NOT SUPPLIED
J
i- p _ --
,I I
I! :
,I,._I
,l@i
I
I
I
Procedure
1. Connectequipment as shown to rearAudio/Video inputjacks.
2. Select the Video modeby pressing TV/MIDEObutton.
3. Operateoptional equipment as instructed in equipment manual.
Note: The S-VIDEO connection is optional and overrides other VIDEO
connection. Use INPUT 1, AUDIO R and L with S-VIDEO connection.
TO AUDIO AMPlifier
Connect to an external audio amplifier input for listening to a stereo system.
Note: TO AUDIO AMP terminals cannot be connected directly to
external speakers.
Audio Adjustments
1. Select TV SPEAKERS ON located in the AUDIO menu on screen.
2. Set amplifier volume to minimum.
3. Adjust TV volume to desired level.
4. Adjust amplifier volume to match the TV.
5. Select TV SPEAKERS OFF&VAO from AUDIO menu.
6. Volume, mute, bass, treble and balance are now controlled from the TV.
Note: In OFF&FAO the volume is controlled by the external amplifier:
[]

PICTURE IN PICTURE (PIP) OPERATION
Picture In Picture (PIP) Operation
With /Without A VCR And Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two
(2) live broadcasts at the same time without or with an external video source (VCR).
Without A VCR (External Video Source)
Procedure Connect incoming cable to antenna (ANT) input on back of TV.
Press the PIP button on the Remote Control to display the PIP frame.
Note: The audio is for the Main Picture, onl F
Choose channels for the PIP frame by pressing the Remote Control PIP
CHANNEL up/down buttons.
Choose channels for the Main Picture by pressing the Remote Control OH
up/down buttons or by using the numeric keypad.
With A VCR (External Video Source) And Cable Box
Connectyour television toa VCR and Cable Box, as shown,
TERMINALS ON BACK OF TV VCR CABLE BOX
0 I
Incoming
Cable
Cable Splitter
(Not Supplied)
CABLES NOT SUPPLIED
Note: The Remote Control must be programmed with suppfied codes to operate the VCR
and Cable Box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note: Theaudio is from the Main Picture only.
Note:
To view scrambled channels through your Cable Box in the PIP frame:
Press the TVNIDEO button on the Remote Control to select the same video
input which your cable box is connected to.
Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.
Choose channels for the PIP frame by pressing the CBL button on the Remote
Control and using the numeric keypad or CH up/down buttons.
Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or OH up/down buttons.
TheSWAPbutton switches the PIP and Main Picture source. Press theRECALL button for PIP
and Main Picture source status, on screen. []

PICTURE IN PICTURE (PIP) OPERA TION (CONT.
Picture In Picture (PIP) Operation (Cont.)
With a VCR - No Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows watching two
(2) live broadcasts at the same time without or with an external video source (VCR),
Connect your television to a VCR, as shown,
(
!
TERMINALS ON BACK OF TV VCR
'0
I_ LIT AN T INPUT
AUDIO OUT
R
}ncomrng
Cable Splitter
(Not Supplied)
CABLES NOT SUPPLIED
Note: The Remote Control must be programmed with the suppfied codes to operate the
VCR. See Programming the Remote Control in the Remote Control Quick
tReference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The audio is from the Main Picture only:
To view an external video source in the PIP frame:
Press the TV/VIDEO button on the Remote Control to select the same video
input which your VCR is connected to.
Verify the VCR is on.
Choose channels for the Main Picture by pressing the TV button on the Remote
Control and using the numeric keypad or CH up/down button,
Choose channels for the PIP frame by pressing the "IV button on the Remote
Control and using the PIP Channel up/down buttons
I _ SWAP end RECALL Buffons
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for PiP
and Main Picture source status, on screen.
13

MAIN MENU
Main Menu
Main Menu
L! ii
ACTION Button
Press the ACTION button to display the Main Menu and Sub Menus, Press the ACTION button
repeatedly to exit.
CH /VOL Buttons
Press the CH (channel) or VOL (volume) buttons to select an icon. Use the CH buttons to
highlight the desired features. Use VOL buttons to select and adjust features.
Remote Action /Navigation Buttons
CH
CH
Remote Control
The Remote Control Quick Reference Guide islocated withinthe package providedwiththis "IV.
[]

MAIN MENU FEATURE CHART
Main Menu Feature Chart
SET TIME
ANT
AUTO PROG
MANUALPROG
AUTO POWER ON
CC MODE
LANGUAGES
GEOMAGNETIC CORR
(Some Models)
AUDIO NORM
BASS
TREBLE .....
,,,, , , ;
BALANCE
MODE
AISOUND
SURROUND
SET UP
When entered, TIME will display on screen after
pressing POWER button, RECALL button, or
changing channels.
Choose CABLE or TV to match the signal at your
antenna input.
Automatically program channels with a signal
into memory.
Manually add or delete channels from memory.
Power up the TV at the same time as the Cable Box
or other components.
Select C1 or C2 for Closed Captioning display. Select
OFF to display closed captioning when MUT E button
is pressed.
Select English, Spanish, or French menu.
Adjustment may be required for geomagnetic fields in
the area.
AUDIO
Reset BASS, TREBLE and BALANCE to factory
default.
Increase or decrease the bass response.
Increase or decrease the treble response•
Emphasize the left/right speaker volume•
Select the audio mode:
[] STEREO - Two channel audio reception,
£3 SAP - (Second Audio Program) Tune to the
alternate audio channel if available in your area
(bilingual or descriptive audio).
MONO - One channel audio• Use when stereo
signal is weak.
Automatically maintain constant volume between
programs and commercials•
Enhances audio response when listening to stereo.
[]

MAIN MENU FEATURE CHART
Main Menu Feature Chart (Cont.)
TV SPEAKERS
AUDIO
_elect TV SPEAKERS:
[_ ON - TV SPEAKERS operate normally.
[_ OFF&VAO (Variable Audio Output) - TV
Speakers off -- audio adjustable by TV.
OFF&FAO (Fixed Audio Output) - TV
SPEAKERS off -- audio adiustable only by the
external amplifier.
TIMER
SLEEP TIMER Program TV to automatically turn off in 30, 60, or
90 minutes. Select NO to turn timer off.
Program TV to automatically turn on and off at
PROGRAM TIMER selected time on a selected channel, daily or only one
day,
PICTURE
PICTURE NORM Reset all picture adjustments to factory default
settings.
COLOR Adjust desired color intensity.
TINT Adjust natural flesh tones.
BRIGHTNESS Adjust dark areas for crisp detail.
PICTURE Adjust white areas of picture.
sHARPNESS Adjust clarity of outline detail,
CH CAP
CHANNEL CAPTION Provide labels for up to 30 stations using up to four
characters for each station,
GAME GUARD Program to prevent video games, cable box, and
VCR's from being viewed.
El

SPECIAL FEATURES
Special Features
Languages
In SET UP menu, select ENGLISH, ESPA_JOL, or FRAN_;AIS to change the menu language.
(menu may vary)
SET-UP
SET TIME 00 : 00
ANT CABLE
AUTO PROG NO
MANUAL PROG NO
AUTO POWER ON OFF
MODE OFF
GEOMAGNETIC CORR NO
PM
M
Geomagnetic Corr (Correction) _(some models)
In SET-UP menu, select GEOMAGNETIC CORR to adjust discoloration due to the geomagnetic
field in the area. Use the Remote Control navigation keys to adjust the tilt bar parallel to the
bottom of the picture frame.
(menu may vary)
:SET.UP
SET T!ME 00 : 100 PM
ANT CABLE
AUTO PROG NO
M_UAL PRCO NO
AUTO PO_R ON OFF
MODE OFF
ENGLiEH EB_qOL FP,AN(_AiS
Timer U
Sleep Timer
In TIMER menu,programtoturnTV OFF in 30,60, or 90 minutes. SelectNOtoturnofftimer.
IW
TIMER CONTROL
PROGRAM TIMER
ON 12 : 00 PM
OFF 12 : 00 AM
CHANNEL 3
SET TIME FIRST
Note: Timer features are unavailable when AUTO POWER is on.

SPECIALFEATURES
Program Timer
In Timer menu, program TV to automatically turn on and off at selected time on a selected
channel, daily or one day.
TIMER CONTROL
SLEEP TIMER NO
ON 12:00 PM
OFF 12 : 00 AM
CHANNEL 3
SET TIME FIRST
Note: TIME must be entered in the SET UP menu to operate PROGRAM TIMER.
\ I <. Turn Off After 90 Minutes
The TV automatically turns OFF after g0 minutes
when turned on by the PROGRAM TIMER. If the
OFF time is programmed or if a key is pressed,
the automatic OFF after 90 minutes will
be cancelled.
! _ PROGRAM TIMER Activation
The PROGRAM TIMER is active when the 1_/ is
OFF or ON. The TV will switch to the selected
channel at the selected time set by the
PROGRAM TIMER.
g

SPECIAL FEA TURES
CH CAP (Channel Caption)
Program channel captions (station labels) for 30 stations using up to fourcharacters. Use the numeric
keypadfor entering numbers unavailablewith the selectarrows.
CHANNEL CAPTION
123
ENTER CAPTION
KpB S
• TO MOVE 4111"TO SELECT
•CURSOR CHANNEL
Note: Delete channel captions by entering dashes (-) in all four character slots.
LOCK
Game Guard Lock
In LOCK menu, use to prevent video games and VCR tapes from being viewed for 12, 24, or 48
hours using a secret code.
Lock Channel 3, Channel 4, and video inputs for 12, 24, or 48 hours by entering a three-digit
secret code using the numeric keypad.
Unlock GAME GUARD by re-entering the same three-digit secret code.
GAMELOCK
LOCKS CH3,4, AND VIDEOINPUTS
HOW LONG? 12 HRS
ENTERCODE - -
Note: Understand how to unlock GAME GUARD before using it. Use a code that is easy to
remember or record it in a safe place.
I,_ GAME GUARD Unlock
If you do not remember your code, Game Guard
will unlock in 12, 24, or 48 hours depending on
last setup.
IB

Unlocking Game Guard
SPECIAL FEA TURES
Enter the same three-digit cede.
If the three-digit code is not the same as entered previously.
Ifthe same three-digit code is used.

TROUBLESHOOTING CHAR1
Troubleshooting Chart
Before calling for service, determine the symptoms and follow suggested solutions.
\
Noisy Audio
Noisy AUOIO
'x,
NoJsy AUdiO
No Audio
Noisy Audio
No Audio
\\
Normal Audio
\\
Normal Audio
Wrong Audio
\
Normal Audio
Snowy Video
Multiple Image
Interference
Normal Video
•,,. ,- ,
%', .., ',.
NO Video
No Video/No PIP
No Color
Discoloration
Normal Video
I Normal Video
Intermittent Remote Control Operation
Adjust Antenna Location and Connection
Adjust Antenna Location and Connection
Check Antenna Lead-in Wire
Move TV from Electrical Appliances, Lights, Vehicles,
and Medical Equipment
Increase Volume
Check Mute
Check TV SPEAKERS on/off
Change Channel
Set TV or Cable Mode Properly
Check Antenna Cables
Check Power Cord is Plugged into Active Outlet
IAdjust Brightness and Audio Controls
Change Channel
! Check Cable Connections
Program the Remote Control Again
Check Second V dee Source Operation
Adjust Color Settings
Change Channel
Adjust Geomagnetic Corr (Correction) in the
SET-UP menu (some models)
Check Audio Is Set To Stereo Or Mona, Not SAP
Replace Remote Control Batteries
m

NO TES
El

NO TES
[]
Read these instructions completely before operating TV,
Contents are subject to change without notice or obligation.
Copyright 1998by Matsushita Electric Corporation of America. All rights reserved.
Unauthorizedcopyingand distribution isa violation of law.
Panasonic Consumer Electronics Company,
Division of Matsushita
Electric Corporation Of America
One Panasonic Way
Secagcus, New Jersey 07094
www panasonlc corn
[phone]
Panasonic de Mexico, S,A, de C.V
Amores NO 1120
Col. Del Valre CP 03100
Mexico O F
Tel [phone]
Fa.<(915 d 015) 575-6763¸ 575 6765
Panasonic Sales Company,
Division of Matsushita Electric
of Puerto Rico Enc. ("PSC")
Ave 65 de Inlanteria, Km 95
San Gabriel Industrial Park
Carolina puerto Rico 00985
Tel [phone]
Fax [phone]

E,w?d ------
LI{_ NRPDS
Sc_,i;ned-------
Batch# --
WARNING,
WARNING" TO_S_, _sk _ eIe,_ shsck_.or rert,m,e co.,_"_. t_
Nouser-se_ psrlsinsk_. P,_ ser,_dngto quBlh_edservicepersonnel.
The limning fhu;hwl_ _row A The e_cbu,netlonl_t withina
hee,d within a tdingle is J'a_. triangle tl Inle_ed to tel the
intended Io tell Ihe mr I_t _ user II_t impor,enl _eretlng
pa.ls kwide the pr_ are a ir_l _.;bck_g instruclkms Ire in
risk ¢t _e_d,c st_ek _ _s_s. _t-_pspers ",,tlthti-_ ipi_e.
WARNING: Topreventfireorshockhazard,donotexposethisappliance
torainormoisture.