Panasonic Viera TX-32LXD700F User manual

TV
INPUT
EXIT
RETURN
OPTION
SDCARD
Operating Instructions
LCD Television
English Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Information on Disposal for Users of Waste Electrical & Electronic Equipment
(private households)
This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternatively, in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative
effects
on human health and the environment which could otherwise arise from inappropriate
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of
disposal.
Printed in Czech Republic
Model No. TX-32LXD700F
Matsushita Electric Industrial Co., Ltd.
Web Site : http://www.panasonic-europe.com
©2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number

2
3
Viewing Advanced FAQs, etc.Quick Start Guide
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
media excitement
Enjoy rich multi-media
Camcorder
Amplifier with
Speaker system
VCR DVD player
DVD Recorder
Personal
computer
Set top box
Contents
•Safety Precautions ······································ 4
(Warning / Caution)
•Notes··························································· 5
•Maintenance ··············································· 5
Be Sure to Read
Advanced Features
•How to Use Menu Functions····················· 18
(picture, sound quality, etc.)
•DVB Settings (DVB)·································· 22
(pay-TV, software update, time adjustment)
•Editing Channels ······································· 24
•Tuning Channels ······································· 26
•Restore Settings ······································ 29
•Input Labels ·············································· 30
•Displaying PC Screen on TV····················· 31
•Viewing from card (Photos)······················· 32
•Q-Link Functions ······································· 34
•HDMI Functions ······································· 35
(HDMI terminal / VIERA Link)
•External Equipment··································· 38
Basic Features
•Watching TV·············································· 12
•Watching Videos and DVDs······················ 14
•Viewing Teletext ········································ 16
Enjoy your TV!
•Technical Information ································ 40
•FAQs ························································· 44
•Licence······················································ 46
•Specifications ············································ 47
FAQs, etc.
Accessories / Options·········· 6
Identifying Controls ··············· 7
Basic Connection ··················· 8
Auto Setup······························· 10
Quick Start Guide
SD memory card
Notice for DVB functions
•
Any functions related to DVB (Digital Video Broadcasting) will work in areas where
DVB-T (MPEG2) digital terrestrial broadcasting are received. Consult your local
Panasonic dealer with coverage areas.
•
DVB functions may not be available in some countries.
•
This TV has the capability for DVB specifications. But future DVB services cannot be
guaranteed.

4 5
Safety Precautions
If you find any
abnormality,
remove the mains plug
immediately!
Keep liquids away from the TV
To prevent damage which may result in fire or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (flower vase,
cups, cosmetics, etc.) above the TV. (including on
shelves above, etc.)
Do not remove covers
NEVER modify the TV yourself
(High-voltage components may cause serious
electrical shock.)
Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
AC 220-240 V
50 / 60 Hz
Do not place foreign objects
inside the TV
Do not let metal or flammable objects drop into the
TV through the air vents (fire or electrical shock
may result).
(Cleaning an energized TV may cause
electrical shock.)
When cleaning the TV, remove the
mains plug
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)
Ensure that the mains plug is easily accessible.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
Warning Caution
Blocked ventilation by curtains,
etc. may cause overheating, fire
or electrical shock.
Do not block the rear air vents
Notes
Maintenance
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fire never place any
type of candle or naked flame on top or near the TV.
Display panel
Cabinet
Mains plug
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
•
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or other hard object.
•
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).
Caution
•
Use care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
•
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
•
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
When TV will not be used for a
long time, remove the mains plug
This TV will still consume some power even
in the Off mode, as long as the mains plug is
still connected to a live socket outlet.
Electronic equipment
In particular, do not place video equipment near the
TV (electromagnetic interference may distort images
/ sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Keep the TV away from these equipment
Adjust the LCD panel to your desired
angle
15° 15°
(View from the top)
Do not allow children to
handle SD card
As with a small object, SD card can be swallowed
by young children. Please remove SD card
immediately after use.
Do not place the TV on sloped
or unstable surfaces
The TV may fall off or tip over.
Use only the dedicated stands
/ mounting equipment
Using an unauthorized stand or other fixtures may
make the TV shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
If no signal is received and no operation is
performed in TV mode for 30 minutes, the TV will
automatically go to standby mode.
Auto power standby function
Transport only in upright position
Allow sufficient space around the
TV for radiated heat
10
10
10 10
(cm)
TV Stand
Minimum distance

6
7
Quick Start Guide
TV
FTV AV
PULL
OPTION SD CARD
EXIT
RETURN
INPUT
MULTI WINDOW DIRECT TV REC
AV
SD CARD
Identifying ControlsAccessories / Options
Batteries for the Remote
Control Transmitter (2)
•
R6 (UM3)
Clamper Remote Control
Transmitter
•
N2QAYB000114
Standard accessories Check that you have the accessories and items shown
Operating Instructions Pan European Guarantee Card
Installing remote’s batteries
1Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•Do not mix old and new batteries.
•Do not mix different battery types (such
as alkaline and manganese batteries).
•Do not use rechargeable (Ni-Cd)
batteries.
•
Do not burn or breakup batteries.
Using the clamper
Optional accessories
Wall-hanging
bracket
TY-WK32LR2W
WARNING!
•
Failure to use a Panasonic bracket or choosing to mount the unit
yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount
your unit will void your warranty.
•
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and
product damage.
•
Do not mount the unit directly below ceiling lights (such as
spotlights, floodlights or halogen lights) which typically give off high
heat. Doing so may warp or damage plastic cabinet parts.
How to remove the TV Stand
Remove four screws.
Rear of the TV
Please contact your nearest Panasonic dealer to purchase the
recommended wall-hanging bracket. For additional details, please
refer to the wall-hanging bracket installation manual.
•
Do not bundle the RF cable and mains lead together (could cause
distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option’s assembly
manual to fix cables.
Increases or
decreases the
programme position
by one. When a
function is already
displayed, press to
increase or decrease
the selected function.
When in Standby
mode, switches TV
On.
Mains power On / Off switch
Lift door to open
C.A.T.S. (Contrast Automatic Tracking System) sensor
(senses brightness to adjust picture quality in “Auto” Mode in Picture Menu) (p. 20)
Remote control
signal receiver
Changes the
input mode
Function select
•Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 27)
Power LED
•Standby: red
On: green
SD CARD slot (p. 33) HDMI3 terminal
•DVB system active during Direct TV Recording (Standby) :orange
Cursor buttons to make selections and
adjustments
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Changes aspect ratio (p. 13)
Selects programmes in sequence
Teletext (p. 16)
OK button to confirm selections and choices
Press after selecting programme positions to
quickly change programme.
VCR / DVD operations (p. 15)
Volume
Programme Information (p. 13)
Teletext Index (p. 17)
Coloured buttons used for the
selection, navigation and operation of
various functions
EXIT (Returns to TV screen)
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection
(p. 34)
Programme / channel change buttons (0-9)
and Teletext page buttons. (p. 12 and p. 16)
When in Standby mode, switches TV On.
Access VIERA Link Menu (p. 37)
Programme Guide (p. 12)
Option menu
Sets the preferred settings of viewing
and sound options easily (p. 12)
Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus (p. 18)
Subtitles
Showing subtitles (p. 12)
Multi window (p. 13)
Surround (p. 20)
Changes the input mode
TV - switches DVB (digital broadcasting)
/ Analogue mode
(p. 12)
AV - changes AV input mode (p. 14)
Viewing SD Card (p. 32)
Returns to the previous menu
Still picture (p. 12)
Teletext Hold (p. 17)
DVB LED
•Identifying Controls •Accessories / Options
To tighten:
Keep the
knob pressed
Rear of the TV
To loosen:
Clamper
(Standard accessory)
Clamper
that bundle
mains lead
Bundle the
cables:
Hook the
clamper:
Tight
Lock

8
9
Quick Start Guide
L
R
Y
PB
PR
PC
AUDIO OUT
DIGITAL AUDIO OUT
V
I
D
E
O
A
U
D
I
O
C
O
M
P
O
N
E
N
T
L
R
L
R
Y
PB
PR
PC
AUDIO OUT
DIGITAL AUDIO OUT
V
I
D
E
O
A
U
D
I
O
C
O
M
P
O
N
E
N
T
L
R
RF IN
RF OUT
RF OUTRF IN RF OUTRF INRF IN
L
R
Y
PB
PR
PC
AUDIO OUT
DIGITAL AUDIO OUT
V
I
D
E
O
A
U
D
I
O
C
O
M
P
O
N
E
N
T
L
R
•
Basic Connection
Basic Connection
Mains lead Mains lead
SCART cable
(fully wired)
DVD Recorder or VCR
RF
cable
Aerial AerialRear of the TV Rear of the TV
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
RF cable
RF cable
TV only TV, DVD Recorder or VCR
AC 220-240 V
50 / 60 Hz
AC 220-240 V
50 / 60 Hz
Note
•
Connect to AV1 / 2 for a DVD Recorder / VCR supporting Q-Link (p. 34).
DVD Recorder
or VCR
SCART cable
(fully wired)
RF cable
Aerial
Mains lead
Rear of the TV
Set top box
Example 3
Connecting DVD Recorder / VCR and Set top box
AC 220-240 V
50 / 60 Hz
RF cable
RF cable
TV, DVD Recorder / VCR and Set top box
SCART cable
(fully wired)
SCART cable
(fully wired)
RF cable

10
11
Quick Start Guide
OPTION SD CARD
INPUT
EXIT
RETURN
TV
Select EXIT
Change
RETURN
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
MPX Stereo
Sound Menu
Reset to Default Set
EXIT
RETURN
Auto Setup - Digital and Analogue
EXIT
This will take about 3 mins.
RETURN
Analogue Scan 2 78 1 41
Digital Scan 5 69
62
Channel Service Name Type Quality
CBBC Channel DVB 10
62 BBC Radio Wales DVB 10
62 BBC Radio Cymru DVB 10
62 E4 DVB 10
62 Cartoon Nwk DVB 10
CH 29 Analogue -
CH 33 BBC1 Analogue -
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
Country
Portugal
Spain
Italy
France
Austria
Germany
Netherlands
Hungary
Czech
E.Eu
Poland
Switzerland
Belgium
Finland
Norway
Sweden
Denmark
Greece
Menüsprache
Slovenčina
Čeština
Еλληνικά
Italiano
Français
English
Srpski
Deutsch
Português
Türkçe
Suomi
Polski
Românǎ
Hrvatski
Nederlands
Slovenščina
Български
Magyar
Svenska
Dansk
Norsk
Español
Viewing Mode
Dynamic Normal Cinema Auto
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
(example: Sound Menu)
On-screen operation
guide will help you.
Auto Setup
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Auto Setup is now complete and your TV is ready for viewing.
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
•
To edit channels
Editing Channels (p. 24)
Analogue Programme Edit (p. 27)
■
ON SCREEN HELP Instructions box
Open the main menu
Return to the previous menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
Many features available on this TV can be accessed via the On Screen Display
menu.
Note
•
If tuning has failed “Auto Setup” ( p. 27).
•
If downloading has failed “Download” ( p. 21).
•
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
■
How to use remote control
•
Auto Setup
Using the
On Screen
Displays
Exit the menu system and return to the normal viewing screen
4Start Auto Setup
•
If a compatible recording equipment
with Q-Link or similar technologies
(p. 34) is connected, analogue
channel information is automatically
downloaded to the equipment.
•
Auto Setup will start to search for
TV channels and store them.
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
3Select your country
select
2Select the language
select
store
•
Also possible to change the setting
in Picture Menu (p. 20)
5Select the picture setting
select
set

12
13
Viewing
SD CARD
RETURN
DIRECT TV REC
OPTION
EXIT
INPUT
MULTI WINDOW
1 BBS
23:35
Corontation Street
20 : 00 ~ 20 : 55
Now For info press
Change category
Profile 1
Cartoon Nwk
All DVB Services
BBC Radio Wales
BBC Radio Cymru
BBC ONE Wales
BBC THREE
BBCi
CBBC Channel
6
7
8
1
2
3
4
Select
Connect EXIT
Page up/down
RETURN
•
To select the two or three-digit programme number, e.g. 39
Watching TV
up
down
or
•
Watching TV
Freeze / unfreeze picture
Hold
■
Other useful functions (Operate after )
Watch TV,
DVD, etc.
in multi
window
DVD
Exit PandP Swap
AV1/RGB
AV1/RGB
Exit PandP Swap
DVD
AV1/RGBDVD
Exit PinP Swap
MULTI WINDOW
blue
yellow
View in multi window (p. 41)
Main screen
Colour bar
Sub screen
•
To exit multi window (return to the single-screen view with main screen)
MULTI WINDOW
•
To change the layout, images, first show the colour bar
To change the layout
green
yellow
To swap
blue
To exit multi window
red
To change the input mode or position of sub screen
•
Remote control operations
apply to the main screen.
Enjoy viewing two images at once, such as a TV programme and a DVD.
Picture-in-Picture mode (PinP) Picture-and-Picture mode (PandP)
green
Operations in multi window
Swap sub screen
for main screen
Change the input mode or position by
the remote control (p. 12 or p. 14)
Swap again
blue
blue
(in a short time)
■
Other useful functions (Operate after )
Display the
current
programme
status
OPTION
Check or change the current
programme status instantly
•
To change
Subtitle Language (DVB mode)
Possible if the programme has some languages of subtitles
Multi Audio (DVB mode)
Possible if the programme has some languages of sounds
Teletext Language
Setup Menu (p. 21)
MPX (Analogue mode)
Sound Menu (p. 20)
Volume Correction
Adjusts volume of individual channel or input mode
select
change
Note
•
Also possible to change the settings in Menu list (p. 20 and p. 21).
Change
aspect
ratio
Select
Change EXIT
RETURN
Aspect selection
16:9
Just
14:9
4:3 Full
4:3
Zoom1
Zoom2
Zoom3
Auto
Change the aspect ratio (p. 40)
Enjoy viewing the picture at its optimum size and aspect.
Aspect Selection list
•
To change the mode
•
To change the mode using the ASPECT button only
(Press repeatedly until you reach the desired mode)
Display Aspect
Selection list
During the list is displayed,
select the mode Store
Select a channel
Volume
3
2
Select DVB (Digital Video Broadcasting) or Analogue
Information banner
Mains power On / Off switch should be On.
(Press for about 1 second)
1
•
You can also select the mode using the TV button on the top panel
of the TV.
Display
subtitles
STTL
Display / hide subtitles (if available)
•
To change the language for DVB
“Preferred Subtitles” (p. 21) (If available)
Turn power on
Note
•
To watch pay-TV
(p. 23)
•
To select from the Programme Guide
select programme
watch
select page
Display
information
banner
1 BBS
23:35
Corontation Street
Bad Signal Encrypted Dolby D
45
20 : 00 ~ 20 : 55
Now For info press
Change category
Profile 1
Display programme information
•
To set display timeout
“Banner Display Timeout” (p. 21)
•
To hide
EXIT
•
Appears also when changing channel.
•
Information of another channel
•
Information on next programme
(DVB)
•
To watch the programme listed in the banner
•
Information banner operation
1st press
Display banner
2nd press
Banner + programme synopsis
(DVB)
3rd press
Exit
Features available
Programme
DVB: Programme
Start / Finish time
Analogue: Programme
Status
Channel Current time Category
To change the category
blue
Sound
mute
Scrambled
broadcasting
Subtitle
Teletext
Stereo sound / multiple audio
Off timer
Weak TV signal
Dolby
Digital

14
15
Viewing
OPTION SD CARD
EXIT
RETURN
MULTI WINDOW DIRECT TV REC
INPUT
•
Watching Videos and DVDs
Watching Videos and DVDs
2
3
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
To connect the equipment (p. 8 and p. 9)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Select the input mode connected to the equipment
Note
•
If the external equipment has an aspect adjustment function, set to “16:9”.
•
For details, see the manual of the equipment or ask your local dealer.
■
To return to TV
Display the Input select menu
Displays the selected mode
1Turn the TV on
■
When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
Receives input signals automatically when playback starts
•
Input signals are automatically identified by the SCART (pin 8)
terminal.
•
This function is also available for HDMI connections (p. 37).
■
If input mode is not switched automatically
Perform and
•
You can also select the input using the AV button on the remote
control or the top panel of the TV.
Press the button repeatedly until the desired input is selected.
•
You can label or skip each input modes “Input Labels” (p. 30)
•
Dependant on the setup of the equipment
VCR / DVD switch∗
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
Panasonic equipment connected to the TV can be directly operated with the remote control.
Note
•
Confirm correct operation after the code changed.
•
The codes will be reset to default values if batteries are replaced.
•
“DVD” means DVD player, DVD recorders and Recorder home theatre.
•
Some operations may not be possible on some equipment models.
∗Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position
Press and hold during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below Press
“VCR” position
Equipment Code
VCR 10 (default)
DVD 11
“DVD” position
Equipment Code
DVD 70 (default)
Player home theatre 71
Input Selection
AV1
AV2/AV2S
AV3/AV3S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
4View
select
watch

16
17
Viewing
OPTION SD CARD
EXIT
RETURN
DIRECT TV RECMULTI WINDOW
<< 01 02 03 04 05 06 07 >>
TELETEXT
INFORMATION
17:51 28 Feb
P108
red
green
yellow
blue
STTL
MULTI WINDOW
yellow yellow
•
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
Viewing Teletext
Switch to Teletext
1
Select the page
up
or
You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is
provided by the broadcasters.
or
■
To return to TV
(Corresponds to the colour bar)
•
Displays Index
(content varies
depending on the
broadcasters)
INDEX
View in
multi
window
Watch
TV while
waiting
for update
Store
frequently
viewed
pages
View sub
page
Call up a
favourite
pages
•
Call up the page stored in “blue”.
•
Factory setting is “P103”.
down
•
Viewing Teletext
Watch TV and Teletext in two windows at once
Time / date
Current
page
number
Sub page number
Colour bar
What is FLOF (FASTEXT) mode?
In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 17)
■
To change mode “Teletext” in Setup Menu (p. 21)
■
To adjust contrast
As the blue bar is displayed
Reveal
hidden
data
red
•
Re-hide
red
Reveal hidden words e.g. quiz page answers
■
Using teletext conveniently
FULL /
TOP /
BOTTOM
green
Normal (FULL)(BOTTOM)
(Expand the BOTTOM half)
Return to the main index page
If you wish to hold the current page without updating
Stop or resume automatic updating
■
To resume
HOLD
Store frequently viewed pages
in the colour bar
(List mode only)
press
and
hold
As page is
displayed
The number changes to white.
Corresponding
colour button
■
To change stored pages
press
and
hold
Enter new page number
Colour button you
want to change
Enter the
4-digit number
example: P6
Appears at upper-left
corner of the screen
■
To view specific sub page
blue
View sub page (Only when teletext is more than one page)
Appears
when
updating is
completed
(You cannot change the channel.)
Teletext automatically updates itself when new information becomes available.
•
The news page provides a function that indicates arrival of latest news (“News Flash”).
Changes to TV screen temporarily
View the
updated
page
View the TV picture while searching for a teletext page
2
•
Operations can be made only in Teletext screen.
What is TOP mode? (in case of TOP text broadcasting)
TOP is a particular improvement of the standard teletext service that results in an easier search and effective guide.
•
Fast overview of the teletext information available
•
Easy to use step-by-step selection of the topical subject
•
Page status information at the bottom of the screen
Available page up / down
red
green
To select among subject blocks
blue
To select next subject within the subject block
(After the last subject, it moves to the next subject block.)
yellow
(TOP)
(Expand the TOP half)
(Analogue mode only)

Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
Picture Menu 1/2
Viewing Mode Auto
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Warm
Colour Management Off
P-NR Off
INPUT
OPTION SD CARD
MULTI WINDOW DIRECT TV REC
EXIT
RETURN
1/2
Viewing Mode Auto
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Warm
Colour Management Off
P-NR Off
Picture Menu
Colour Balance Normal
Sharpness
Tuning Menu Access
18
19
How to Use Menu Functions
•How to Use Menu Functions
(picture, sound quality, etc.)
Display the menu
3
2
4
Various menus allow you to make settings for the picture, sound, and other functions.
•
Displays the functions that can be set
(varies according to the input signal)
Note
•
To initialize all settings
“Shipping Condition”
(p. 29)
■
To return to TV
at any time
EXIT
■
To return to the
previous screen
RETURN
Select the menu
Select the item
(example: Picture Menu)
access
select
Adjust or select
change
(example: Picture Menu)
(example: Picture Menu)
Changed
Number and positions
of alternatives
Moved
■
Choose from among alternatives
■
Adjust using the slide bar
store or access
(Required by some
functions)
1
Displays the next screen
■
Go to the next screen
■
To change menu pages
up
down
select
■
Overview
VIERA Link Control
Speaker Selection
VIERA Link Menu
Home Cinema
Recorder
(p. 37)
Main Menu
VIERA Link
Picture
Sound
Setup
The menu of the accessed
equipment
1/2
Viewing Mode Auto
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance Warm
Colour Management Off
P-NR Off
Picture Menu
2/2
3D-COMB Off
Reset to Default Set
MPEG NR Off
Picture Menu
(p. 20)
2/2
Reset to Default Set
Sound Menu
HDMI1 Input Auto
Audio Preference
MPEG Audio Level 0dB
MPEG
SPDIF Selection PCM
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
Sound Menu
MPX Stereo
Preferred Multi Audio English
1/2
(p. 20)
1/2
AV Colour System Auto
Q-Link Settings Access
Child Lock Access
Tuning Menu
Off Timer Off
Language
Teletext TOP
Access
Access
Setup Menu
DVB Profile Edit Access
DVB Service List
Access
2/2
Shipping Condition Access
Input Labels
Banner Display Timeout 3 seconds
VIERA Link
Software License Access
System Information Access
On
Access
Setup Menu
Time Zone Auto
Common Interface Access
System Update Access
(p. 21)
Q-Link Settings
Q-Link AV2
AV2 out DVB
Download Access
(p. 21)
Off
Tuning Menu
Auto Setup Access
Analogue Programme Edit Access
DVB Manual Tuning
Analogue Manual Tuning Access
Add New DVB Services Access
Access
New Service Message
DVB Signal Condition Access
On
(p. 26)
•
Only available items can be selected.

Advanced
Menu Item Adjustments / Configurations (alternatives)
VIERA Link
VIERA Link Control Controls the connected Panasonic equipment
“Easy control only with VIERA remote control” (p. 37)
“Speaker control” (p. 37)
•
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.
Speaker Selection
Picture
Viewing Mode Basic picture mode (Dynamic / Normal / Cinema / Auto)
•
Set for each input signal
Contrast, Brightness,
Colour, Sharpness Adjusts colour, brightness, etc. for each picture mode to suit your taste
Tint Adjusts tint of image
•
For NTSC signal reception only
Colour Balance Chooses the colour balance of the entire image (Cool / Normal / Warm)
Colour Management Automatically adjusts colours to vivid ones (Off / On)
•
Not valid on PC signal
P-NR
Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)
•
Not valid on HDMI, PC signal or DVB
MPEG NR
Automatically reduces noise for watching DTV, DVD, VCD and SD Card (Off / Min / Mid / Max)
3D-COMB
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•
For PAL or NTSC signal reception only
•
Not valid on RGB, S-Video, components, PC, HDMI and SD Card
Reset to Default Press the OK button to reset the present Picture Mode to the default settings
Sound
Mode Basic sound mode (Music / Speech)
Bass Adjusts the output level of deep bass
Treble Adjusts the output level of high-pitch, shrill sound
Balance Adjusts volume level of right and left speakers
Headphone Volume Adjusts the volume of the headphones
Surround
Surround sound settings (Off / Simulated Surround / SRS TruSurround XT)
Simulated Surround : Provides a dynamic enhancer to simulate improved spatial effects
SRS TruSurround XT : SRS TruSurround XT
®
creates a high quality surround sound effect using just
two speakers from the source which can output surround encoded signals
•
Switching is also possible by the Surround button on the remote control (p. 7)
Volume Correction Adjusts volume of individual channel or input mode
Preferred Multi Audio Selects the preferred language for DVB multi audio (depending on the broadcaster)
MPX
Select stereo / monaural (Mono / Stereo)
•
Normally: Stereo
•
Stereo signal cannot be received: Mono
•
M1 / M2: Available while mono signal is transmitted
•
Analogue mode only
Audio Preference
Selects the initial setting for Audio tracks (Dolby Digital / MPEG)
If programme has both Dolby Digital and MPEG audio tracks, priority is given to what you select
Dolby Digital : A method of coding digital signals developed by Dolby Laboratories. Apart
from stereo (2ch) audio, these signals can also be multi-channel audio.
MPEG : An audio compression method that compresses audio to small size
without any considerable loss of audio quality.
•
DVB mode only
SPDIF Selection
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT
terminal (Auto / PCM)
Auto: Dolby Digital is output as Bitstream (5.1ch).
•
Dolby Digital is available for Bitstream (5.1ch) and PCM (2ch).
•
MPEG is fixed to PCM.
•
DVB mode only
MPEG Audio Level
Normally, MPEG sound is larger than Dolby Digital one
You can adjust the audio level of MPEG as the initial setting
•
0dB to -12dB in -2dB reductions
HDMI1 Input
Select to fit the input signal (Auto / Digital / Analogue) (p. 35)
Auto : Automatic detection of digital or analogue sound source
Digital : HDMI cable connection
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only
•
HDMI2 / 3 terminals are for digital signal only
•
No setting for HDMI2 / 3 available
Reset to Default Press the OK button to reset the present Sound Mode to the default settings
Menu Item Adjustments / Configurations (alternatives)
Setup
AV Colour System Selects optional colour system based on video signals in AV mode
(Auto / PAL / SECAM / M.NTSC / NTSC)
DVB Profile Edit Creates list of favourite programmes (p. 25)
DVB Service List Skips the unwanted DVB channels (p. 25)
Q-Link Settings
Q-Link Selects which AV terminal is to be used for data communication between this TV and a
compatible recording equipment (AV1 / AV2) (p. 34)
AV1 / AV2 out
Chooses the signal to be transmitted from the TV to Q-Link
(Analogue / DVB / AV1 / AV2 / AV3 / Monitor)
•
Monitor: Image displayed on screen
•
Component, PC and HDMI signals cannot be outputted
Download Downloads analogue channel information to a Q-Link compatible equipment connected
to the TV
Child Lock Locks a programme channel to prevent access to it (p. 25)
Tuning Menu
Auto Setup Automatically sets the channels received in the area (p. 27)
Analogue
Programme Edit Edits analogue channels (p. 27)
DVB Manual
Tuning Sets the DVB channels manually (p. 28)
Analogue
Manual Tuning Sets the analogue channels manually (p. 28)
Add New DVB
Services Adds new DVB services (p. 28)
New Service
Message
Selects whether to give a notification message when a new DVB service is found
(p. 28)
DVB Signal
Condition Checks the DVB signal condition (p. 28)
Off Timer Sets the time the TV automatically turns Off (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)
Language
OSD Language Changes language for on-screen displays
Teletext
Language
Selects teletext language (West / East1 / East2)
•
West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish
•
East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian
•
East2: Czech, Hungarian, Lettish, Polish, Rumanian
Preferred Subtitles
Selects the preferred language for DVB subtitles (depending on the broadcaster)
•
To display subtitles p. 12
Teletext Teletext display mode (TOP (FLOF) / List) (p. 16)
Shipping Condition Resets all settings, for example, when moving house (p. 29)
Common Interface Uses to watch pay-TV (p. 23)
System Update Downloads new software to TV (p. 23)
Input Labels Labels or skips each input terminals (p. 30)
Banner Display
Timeout
Sets how long the information banner (p. 13) stays on screen
•
0 (No display) to 10 sec. in 1-sec. increments
VIERA Link Sets to use VIERA Link functions (Off / On) (p. 36)
Time Zone Adjusts the time data (p. 23)
Software License Displays the software licence information
System Information Displays the system information of this TV
20
21
■
Menu list
•How to Use Menu Functions
(picture, sound quality, etc.)
How to Use Menu Functions
■
Menu list
•
A different menu will be displayed while PC or SD Card is used. (p. 31 and p. 33)
•
Only available items can be selected.

Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
Off
Power Save
Side Panel Off
Off
2/2
Common Interface Access
System Update Access
Input Labels
Banner Display Timeout 3 seconds
VIERA Link
Software License
System Information
On
Setup Menu
Time Zone Auto
OPTION SD CARD
RETURN
EXIT
INPUT
TV
22
23
DVB Settings
4
3
5
Select “Setup”
Select “Common Interface”, “System Update”
or “Time Zone”
Display the menu
Set
■
To return to TV
EXIT
(DVB mode)
1If in Analogue mode
Select DVB
DVB Settings provide access to various advanced features.
•DVB Settings (DVB)
(pay-TV, software update, time adjustment)
2
access
select
access
select
System
Update
Update
TV's
software
system
■
To update immediately
System Update
Auto Update Search in Standby
System Update Search Now
On
Select “Auto Update Search in Standby” and then set “On” or “Off”
•
On: Automatically performs
a search in standby and
downloads an update, if any
software updates are available
set
select
Download new software to TV.
•
For details (p. 41)
If System Update is performed, the software will be updated (it may change TV
functions). If you do not wish to do so, set “Auto Update Search in Standby” to Off.
Select
“System Update Search Now” Searches for an
update (for several
min.) and displays
a corresponding
message if any
Download
access
select •
Download may take
for about 20 min.
Pay-TV
Common
Interface
Common Interface
The Common Interface Module menu provides access to software contained on Common
Interface (CI) Modules.
This TV receiver works only Pay TV modules complying with CI standard.
Common Interface
Slot 1: Module inserted
Access “Common Interface”
select, go
Coloured characters
red
green
yellow
blue
Follow the on-screen instructions
example: •
On-screen operation guide
may not correspond to the
remote control buttons.
Caution
•
Turn Off Mains power On / Off switch
whenever inserting or removing the CI
module.
•
If a view card and a card reader
come as a set, first insert the card
reader, then insert the view
card into the card reader.
•
Do not insert the module up side down.
•
The features that appear on screen are dependent on the contents of the selected CI
module.
•
Normally pay-TV services will appear without and .
If pay-TV services does not appear, perform and .
•
For more details, see the manual of the CI module, or check with the broadcaster.
Insert the CI module (optional)
CI slot
Insert or
remove
straightly
and
completely
CI module
Rear of the TV
access
Time Zone
Adjust the
time data
automatically
Auto : The time data will be adjusted according to your
area automatically.
Others : The time data will be corrected based on GMT.
set
select
Set the time

Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
Off
1/2
Shipping Condition
DVB Profile Edit Access
DVB Service List
Q-Link Settings
Child Lock Access
Access
Tuning Menu
Off Timer Off
Language
Teletext TOP
Setup Menu
OPTION SD CARD
EXIT
INPUT
TV
RETURN
24
25
Editing Channels
Select “Setup”
Select “DVB Profile Edit”,
“DVB Service List” or
“Child Lock”
4
3
Display the menu
5Set
You can make your favourite channel lists, skip unwanted channels and control channel audience.
■
To return to TV
EXIT
•Editing Channels
1Select DVB or Analogue
2
•
“DVB Profile Edit” and “DVB Service List” are
available in DVB mode only.
Wed 12/05/04 10:46Profile Editor
BBC One Wales
All DVB Services
1
BBC THREE7
E414
CBBC Channel70
Cartoon Nwk72
BBCi105
BBC Radio Wales719
BBC Radio Cymru720
BBC One Wales
Profile 1
1
List
favourite
channels
DVB
Profile Edit
(DVB mode)
Wed 12/05/04 10:46Profile Editor
BBC One Wales
All DVB Services
1
BBC THREE7
E414
CBBC Channel70
Cartoon Nwk72
BBCi105
BBC Radio Wales719
BBC Radio Cymru720
Profile 1
green
•
To add all channels
to the list
yellow
Create your favourite channel list (Profile) from various broadcasters (up to 4: Profile 1 to 4).
The list is displayed in information banner (p. 13) and then easily accessed.
select
To display
another Profile
blue
A channel is added
Select a channel and add it to the list
Store
■
To edit Profile
Select the field of Profile to edit and:
•To name the Profile
red
Select the character
RETURN
•To move the channel
green
Select the new position Confirm
green
•To delete the channel
yellow
•To delete all channels
blue
access
select
access
select
Control
channel
audience
1 of 2Child Lock-PIN Entry
Please enter new PIN
PIN * * * *
Child Lock
Service List
Change PIN
Access
Wed 12/05/04 10:46Child Lock Service List
BBC One Wales
Service Name
1
BBC THREE7
E414
CBBC Channel70
Cartoon Nwk72
BBCi105
BBC Radio Wales719
BBC Radio Cymru720
Lock
DVB
DVB
DVB
DVB
DVB
DVB
DVB
DVB
Type
■
To change the PIN number
Select “Change PIN” in and enter a new PIN number twice.
You can lock specific channels and control who watches them.
(When a channel is selected, a message appears; by entering the PIN number, you can
watch the channel.)
select
Appears when the channel is locked
Enter the PIN number (4 digits)
Select “Service List”
•
To cancel
Select the locked channel
•
To lock all channels
yellow
•
To cancel all channel locks
blue
Select the channel to be locked
Note
•
Setting “Shipping Condition” (p. 29) erases the PIN number and all settings.
•
Enter the PIN number twice at first
setting.
•
Make a note of the PIN number in
case you forget it.
set
select
access
Child Lock
Skip
unwanted
channels
DVB
Service
List
(DVB mode)
You can hide unwanted services. The deleted services cannot be displayed except in this function.
Use this function to skip unwanted services.
Select a service and add / delete
CBBC Channel
DVB Service List
Cartoon Nwk
BBCi
BBC Radio Wales
BBC Radio Cymru
BBC ONE Wales
BBC THREE
70
72
105
719
720
1
7
add / delete
select
:add
:delete (skip)

Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
Off
1/2
Shipping Condition
DVB Profile Edit
DVB Service List
Q-Link Settings
Child Locks
Tuning Menu
Off Timer Off
Language
Teletext TOP
Access
Setup Menu
OPTION SD CARD
EXIT
INPUT
TV
RETURN
Off
Tuning Menu
Auto Setup Access
Analogue Programme Edit Access
DVB Manual Tuning
Analogue Manual Tuning Access
Add New DVB Services Access
Access
New Service Message
DVB Signal Condition Access
On
26
27
•Tuning Channels
Set DVB and
Analogue
channels
automatically
Auto Setup
Set
6
Tuning Channels
Select “Setup”
3
Select “Tuning Menu”
4
Display the menu
Select a function
5
You can re-tune all TV channels when moving house or search for new services which may have recently
started broadcasting.
■
To return to TV
EXIT
2
access
select
access
select
access
select
1Select DVB or Analogue
•
“DVB Manual Tuning”, “Add New DVB Services”, “New Service
Message” and “DVB Signal Condition” are available in DVB mode only.
•
“Analogue Programme Edit” and “Analogue Manual Tuning” are
available in Analogue mode only.
Automatically set the DVB and Analogue channels received in the area.
If a Child Lock PIN number (p. 25) has been set, it must be entered.
EXIT
RETURN
Start Auto Setup
All tuning data will be erased
Auto Setup
Start Auto Setup
•
All previous settings are erased.
•
The analogue settings are downloaded to a Q-Link compatible equipment connected to the TV.
•
When the operation is completed, the digital broadcast of programme number “1” will appear.
If no DVB services are found, the analogue broadcast will appear.
•
If tuning has not done completely “DVB Manual Tuning”, “Analogue Manual Tuning”
Auto Setup - Digital and Analogue
This will take about 3 mins.
Analogue Scan 2 78 1 41
Digital Scan 5 69
62
Channel Service Name Type Quality
CBBC Channel DVB 10
62 BBC Radio Wales DVB 10
62 BBC Radio Cymru DVB 10
62 E4 DVB 10
62 Cartoon Nwk DVB 10
CH 29 Analogue -
CH 33 BBC1 Analogue -
Settings are made automatically
■
To return to TV
F
FTV AV
For Auto Setup, using the buttons on the top of the TV
Press repeatedly until “Auto Setup” appears
F
Access “Auto Setup”
TV
Start “Auto Setup”
TV
Edit
Analogue
channels
■
Delete
■
Add
■
Move
■
Change
name
■
Change
sound
system
■
Change
colour
system
Analogue
Programme
Edit
3 FTP
23:35
Corontation Street
CH05 SC1 PAL
Change category
Profile 1
Analogue Programme Edit
1CH33
2CH21
3CH21
4CH60
5CH21
Prog. Chan. Name
1 2 3
X Y Z
F T P
4 5 6
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
Sound Sys. Colour Sys.
■
To change sound system based on signals
Select the
“Sound Sys.” field
Select
sound system
SC1 : PAL B, G, H / SECAM B, G
SC2 : PAL I
SC3 : PAL D, K / SECAM D, K
F : SECAM L / L’
Analogue Programme Edit
1CH33
2CH21
3CH21
4CH60
5CH21
Prog. Chan. Name
1 2 3
X Y Z
F T P
4 5 6
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
Sound Sys. Colour Sys.
Analogue Programme Edit
1 CH33
2 CH21
3 CH21
4 CH60
5 CH21
Prog. Chan. Name
1 2 3
X Y Z
F T P
4 5 6
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
Sound Sys. Colour Sys.
■
To change the name of the broadcaster displayed when selecting channels
Cursor
Select the channel to edit
Edit
■
To delete
red
After confirming, press
red
■
To add
green
After confirming, press
green
Edit the analogue programme position settings
select
Analogue Programme Edit
1CH33
2CH21
3CH21
4CH60
5CH21
Prog. Chan. Name
1 2 3
X Y Z
F T P
4 5 6
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
SC1 Auto
Sound Sys. Colour Sys.
Select the “Colour Sys.” field
Select colour system
■
To change colour system based on signal
•
Normally, select “Auto”
■
To move
yellow
Select new
position
yellow
Channel
Name
Select the “Name” field
red
Enter the “User input” mode
Select the character
Set (Maximum: five characters)
•
To change channel number
“Analogue Manual Tuning” (p. 28)
RETURN
Store

Advanced
Main Menu
VIERA Link
Picture
Sound
Setup
1/2
Q-Link Settings
Child Lock
Tuning Menu
Off Timer Off
Language
Teletext
Shipping Condition Access
TOP
Setup Menu
DVB Profile Edit
DVB Service List
RETURN
OPTION SD CARD
INPUT
EXIT
28
29
Check the message and initialise
Follow the on-screen instructions
•
“Auto Setup” will automatically start. (p. 10)
■
To re-tune TV channels only, e.g. after moving house
“Auto Setup” (p. 27)
Tuning Channels
3
2
4
Select “Setup”
Select “Shipping Condition”
Display the menu
Set
■
To return to TV
EXIT
Restore Settings
Shipping
Condition
Restore
Settings
Resets the TV to its original condition, i.e. no channels tuned in.
All settings (channels, picture, sound quality, etc.) are reset.
1
access
select
All tuning data will be erased
Are you sure?
Are you sure?
EXIT
RETURN
Confirm
Shipping Condition
access
select
set
•Restore Settings
•Tuning Channels
Off
DVB Signal Condition
DVB Programme [70] CBBC Channel
0 5 10
Signal Quality
Signal Strength
Selects a channel and checks the DVB signal condition.
Use for adjusting the direction of the aerial.
Signal Quality:
•
Green bar Good
•
Yellow bar Poor
•
Red bar Bad (Check the aerial)
•
To change the programme during the menu appears
Check
DVB signal
DVB Signal
Condition
Display a
notification
message
New DVB service found!
Press OK to add new service.
Press EXIT to lgnore.
Selects whether to give a notification message when a new DVB service is found. (Off / On)
New Service
Message
Set Analogue
channel
manually
Analogue
Manual Tuning
Fine Tuning
Programme 1 [CH33]
Analogue Manual Tuning
Manual Tuning 2 78 411
■
Fine Tuning
Use to make small adjustments to the tuning of an individual channel (affected by weather
conditions, etc.)
■
Manual Tuning
Set Analogue channel manually after Auto Setup.
If a VCR is connected with only the RF cable, select programme position “0”.
store
search
Search and storeSelect the channel
Set DVB
channel
manually
DVB Manual
Tuning
Normally use “Auto Setup” or “Add New DVB Services” for the DVB channel setting.
If tuning has not done completely, use this function.
adjust frequency
(set where the level of “Signal Quality”
becomes the maximum)
select channel
search
DVB Manual Tuning
Signal Quality
Stopped
0 10
Signal Strength 0 10
Frequency MHz
[CH21] 474,00
Prog. Channel Net ID. Quality
TS ID.Service Name
•
All services found will be added to the
DVB Service List (p. 25) automatically.
Add
DVB channel
automatically
Add New
DVB Services
Any new services found will be added to the DVB Service List (p. 25) automatically.
Add New DVB Services
Please wait!
This will take about 3 mins.
569
Prog. Channel Service Name Net ID. TS ID. Quality
ZDF
ARD
start
•
The new service is added with the current settings
saved as they are.
Select the programme position

Advanced
Menu Item Adjustments / Configurations (options)
Picture
Advanced
PC
Settings
R-Gain Adjusts the white balance for red areas
G-Gain Adjusts the white balance for green areas
B-Gain Adjusts the white balance for blue areas
Gamma (2.0 / 2.2 / 2.5)
Setup
PC
Setup
Input
Resolution
Switches to a wide view
•
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,366 × 768 pixels)
•
Options change depending on signals
Clock Set to the minimum level if noise occurs
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase Eliminates flicker and distortion
•
Adjust after Clock adjustment • Set to the minimum level if noise occurs
Sync
Chooses another synchronous signal if the image is distorted (H & V / On G)
•
H & V : by the horizontal and vertical signals from your PC
On G : by the green signal from your PC (if available)
OPTION SD CARD
EXIT
RETURN
INPUT
Input Selection
AV1
AV2/AV2S
AV3/AV3S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
Main Menu
VIERA Link
Picture
Sound
Setup
2/2
System Information
Time Zone Auto
VIERA Link On
Software License
Common Interface
System Update
Input Labels
Banner Display Timeout 3 seconds
Access
Setup Menu
OPTION SD CARD
INPUT
EXIT
TV
RETURN
1 of 2Input Labels
AV1 DVD
AV2/AV2S AV2/AV2S
AV3/AV3S AV3/AV3S
COMPONENT COMPONENT
PC PC
HDMI1 HDMI1
HDMI2 HDMI2
HDMI3 HDMI3
30
31
•Displaying PC Screen on TV
•Input Labels
■
To return to TV
Displaying PC Screen on TV
Select the external input
Select “PC”
2
The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 38)
•
Corresponding signals (p. 43)
•
If “H-freq.” or “V-freq.” is shown in red,
the signals may not be supported.
■
PC menu setting (changed as desired)
•
To make settings “How to Use Menu Functions” to (p. 18)
•
Other items p. 20 and p. 21
1
Input Labels
2
3
4
Select “Setup”
Select “Input Labels”
Display the menu
Select a input terminal and set
■
To return to TV
EXIT
For easier identification and selection of the input mode, you can label each input terminals or skip
terminal that is not connected to any equipment.
(To select the input mode p. 14)
set
select
1
The labels you set will be displayed in “Input Selection” menu (p. 14) or banner.
•
If “Skip” is selected, you cannot select the mode.
access
select
access
select
access
select
■
User input
You can name each input terminals freely.
Select “User input”
access
select
Set characters
User input
Name
ABCDEFGH I JKLMN
UVWXYZ 0123456
abcde f gh i j k lmn
uvwxyz ( )+- . *_
OPQRST
789! : #
opq r s t
set
select
(maximum: ten characters)
Store
RETURN

Advanced
INPUT
OPTION SD CARD
EXIT
RETURN
Filename
Date
Pixel
100-0001
1/17
10/23/2006
1600 x 1200
100-0004100-0003100-0002100-0001
100-0008100-0007100-0006100-0005
100-0012100-0011100-0010100-0009
Photo View Mode
Select
View
Reading
EXIT
Select
RETURN
Slide show
32
33
•Viewing from card (Photos)
Prev
Rotate
Rotate
Select
Slide show
View
EXIT
List
■
Slide show
red
•
For details,
see p. 33
Viewing from card
The still images recorded by the digital camera will be displayed.
View
4
Insert the SD Card
•
Warning message for output signal is displayed.
Select the photo to be viewed
3
Displayed one at a time
1
2
select
view
Operation
guide
(Thumbnail screen)
Caution
•
During the operation, no signals are output from the monitor output terminals.
•
“Date” shows the date on which the recording was made by the digital camera. It
shows “**/**/****” when recordings are made without date signal.
■
To return to
thumbnail screen
RETURN
■
To return to TV
EXIT
or
SD CARD
SD
Card
Label surface
(Photos)
Push until a click is heard
■
To remove
■
To insert
Press the centre of the card
Error display
(images that could not be loaded, etc.)
Selected
photo
■
To display the operation guide or
OPTION
Cautions in handling SD Card
•
Do not remove the card while the TV is accessing data (this can damage card or TV).
•
Do not touch the pins on the back of the card.
•
Do not subject the card to a high pressure or impact.
•
Insert the card in the correct direction (otherwise, card may be damaged).
•
Electrical interference, static electricity, or erroneous operation may damage the data or card.
•
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic operation of the
TV. (Panasonic is not liable for any deterioration or damage of recorded data.)
Selected photo
information is displayed
Main Menu
Picture
Viewing Setup
red
■
Start Slide show (operate in step or )
■
Slide show settings (operate in step or )
Slide show
Select the photo for the first view
Display the
menu
Select “Viewing Setup” Select the functions and set
•
“Picture Menu” (p. 20)
Menu Item Adjustments / Configurations (alternatives)
Viewing
Setup
Interval Select slide show interval (5 / 10 / 15 / 30 / 60 / 90 / 120 seconds)
Repeat Slide show repeat (Off / On)
set
select
•
To pause
On screen messages
Is SD Card in? • Insert a SD card.
Cannot read file •
The file is broken or unreadable.
•
The TV does not support the format.
(For the applicable formats and data, see p. 42.)
No valid file to play • The card has no data.
Message Meaning / Action
Interval 5 seconds
Repeat Off
Viewing Setup
access
select
To previous photo
Rotate 90˚(anti-clockwise)
To next photo
Rotate 90˚
(clockwise)
Start Slide show
Enter SD mode (Photo View Mode)
•
For details on SD Cards (p. 42)

Advanced
Connection
Function VIERA Link and Q-Link VIERA Link only Q-Link only
Easy playback OOO
Power on link OOO
Power off link OOO
Speaker control
O
(not via SCART)
O
-
Easy control only with
VIERA remote control
O
(not via SCART)
O
-
Direct TV Recording
O
(not via HDMI)
-
O
Analogue channel download
O
(not via HDMI)
-
O
(HDMI) (SCART) (HDMI) (SCART)
34
35
•HDMI Functions
•Q-Link Functions
Q-Link Functions
Q-Link connects the TV and VCR / DVD recorder, enables easy recording and playback.
■
Condition
■
Features available
Some recording equipments are not applicable. Read the manuals of the equipment.
Information
/ Message
Recording information or if recording is not possible, a message is displayed.
(Only when the programme number is “0” or “AV mode” for some equipment.)
Power
on link
and Easy
playback
When VCR or DVD recorder starts playback or direct navigator / function menu
for the equipment are activated, the TV is turned on and input mode is switched
automatically so that you can view the content. (Only when TV is in Standby mode.)
Power off
link
When TV is set to Standby mode, the recording equipment is also automatically
set to Standby. (Only when the videocassette or DVD is not active.)
•
Use the VCR / DVD recorder with the following logos:
“Q-Link”, “NEXTVIEWLINK”, “DATA LOGIC”, “Easy Link”, “Megalogic”, or “SMARTLINK”
•
Connect the equipment to this TV’s AV1 or AV2 terminal via a “fully-wired” SCART cable. (p. 38)
•
Q-Link terminal setup in Setup menu (Q-Link, AV1 / AV2 out). (p. 21)
• “DATA LOGIC” (a trademark of Metz Corporation) • “Megalogic” (a trademark of Grundig Corporation)
• “Easy Link” (a trademark of Philips Corporation) • “SMARTLINK” (a trademark of Sony Corporation)
Read the manuals of the equipment too.
■
Download analogue channel settings
•
Perform Auto Setup. (p. 27)
When first using this TV, see “Auto Setup”. (p. 10)
•
Perform download to the equipment. (p. 21)
(∗1): The HDMI logo is displayed on HDMI-compliant equipment.
(∗2): Enquire at your local digital equipment retailer shop.
HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-
quality sound by connecting the TV and the equipment.
HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box or a DVD
player, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable.
About connections, see “External Equipment” (p. 38).
Note
•
HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.
•
If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (
∗
2).
•
When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1: use
COMPONENT-AUDIO terminals).
•
Audio settings can be made on the “HDMI1 Input” menu screen. (p. 20)
•
Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz
•
HDMI2 / 3 terminals are for digital audio signal only.
•
Use with a PC is not assumed.
•
If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.
•
These HDMI connectors are “type A”.
•
These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright
protection.
•
An equipment having no digital output terminal may be connected to the input terminal of either “Component”,
“S-VIDEO”, or “Video” to receive analogue signals.
•
The HDMI input terminal can be used with only the following image signals:
480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment.
•
For details of the applicable HDMI signals, see p. 43.
HDMI Functions
■
Summary of Control functions
Connecting with an HDMI cable to Panasonic equipment with VIERA Link function, you can control the equipment
(p. 36). You can use VIERA Link and Q-Link functions together.
What you
see is
What you
record
DIRECT TV REC
Direct TV Recording:
Recording the current programme in VCR / DVD recorder
immediately.
■
To change DVB channel, stop recording
EXIT
•
When Direct TV Recording is performed, the
recording equipment is automatically turned on if it
is in Standby mode.
•
The recording equipment is recording from its own
tuner. You can turn the TV off during recording
(Analogue only).
•
If you turn the TV off during recording from an AV
source, the recording will be stopped.
•
When Direct TV Recording is performed while
watching DVB channel, the DVB programme
position is locked and no other DVB channel can
be selected. However you can watch analogue
channels.

Advanced
•HDMI Functions
Off
Off
Off
Setup Menu 2/2
VIERA Link
Software License
On
Banner Display Timeout
3 seconds
Input Labels
System Update
System Information
Time Zone Auto
Common Interface
SD CARD
INPUT
OPTION
EXIT
RETURN
36
37
Set to “On”
(default is On)
Select “Setup”
Select “VIERA Link”
2
1
3
Display the menu
∗Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.
This TV supports “HDAVI Control 2” function.
Connections to some Panasonic equipment (DVD Recorder DIGA, HD Video Camera, Player theatre,
Amplifier, etc.) with HDMI cables allow you to interface them automatically.
The equipment with “HDAVI Control” function enables the following operations:
•
Easy playback (p. 37)
•
Power on link (p. 37)
•
Power off link (p. 37)
•
Speaker control (p. 37)
In addition, the equipment with “HDAVI Control 2” function enables the following operation:
•
Easy control only with VIERA remote control (p. 37)
These features are limited to models incorporating Panasonic’s “HDAVI Control” and “VIERA Link”.
VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry
standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have
developed and added. As such, its operation with other manufacturers’ equipment that supports HDMI
CEC cannot be guaranteed.
Refer to individual manuals for compatibility information. About applicable equipment, consult your local
Panasonic dealer.
VIERA Link “ ControlTM”∗
4
HDMI Functions
■
HDMI cable
This function needs an HDMI compliant (fully wired) cable. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. Recommended part number:
•RP-CDHG15 (1.5 m)
•RP-CDHG30 (3.0 m)
•RP-CDHG50 (5.0 m)
Easy
playback
Automatic Input switching-When the connected Panasonic equipment is operated, input
mode is switched automatically. When it is stopped operating, input mode is returned.
Power on
link
When the connected Panasonic equipment starts playback or direct navigator /
function menu for the equipment are activated, the TV is automatically turned on.
(Only when TV is in Standby mode.)
Power off
link
When TV is set to Standby mode, the connected Panasonic equipment is also
automatically set to Standby.
•
This function will work even if the TV enters standby mode automatically by Off Timer
function or auto power standby function.
select
set
■
Preparations
Setup the equipment to enable this function. Read the manuals of the equipment.
About connections, see “External Equipment” (p. 39). Read the manuals of the equipment too.
■
For the first time / When adding new equipment, reconnecting equipment or changing setup
After connection turn the equipment on and then switch the TV on.
Select the input mode to HDMI1, HDMI2 or HDMI3 (p. 14), and make sure that an image is
displayed correctly.
Main Menu
VIERA Link
Picture
Sound
Setup
access
select
Speaker
control
select
You can control the theatre speaker with TV’s remote control.
This function is available when Panasonic Amplifier or Player theatre is connected.
•
If you cannot access the menu, check the
settings and the equipment (p. 36).
Display “VIERA Link Menu”
■
TV
TV speakers are active.
■
Home Cinema
Adjustment for equipment
(automatically turned on if it is in
Standby mode).
Volume up / down
Mute
Select “Speaker Selection”
Set to “Home Cinema” or
“TV”
•
The sound of TV speakers is mute.
•
When the equipment is turned off,
TV speakers will be active.
set
VIERA Link Control
Speaker Selection
VIERA Link Menu
Home Cinema
Recorder
Easy
control
only with
VIERA
remote
control
You can control some functions of the
connected Panasonic equipment with
this TV remote control (point the remote
control at the TV’s signal receiver).
•
If you cannot access the menu, check the
settings and the equipment (p. 36).
•
Example:
•
About the operations for the equipment, read the manual of the equipment.
DVD Recorder DIGA HD Video Camera Player theatre
HDD
FUNCTION MENU
Playback
Recording
Delete
Copy
To Others
ALL
DATE/TIME 2006.12. 1 10:46
8 / 8
Listen
Start
Watch
Import/Record
Setup
Move the cursor / select the
menu
Move the cursor / access /
adjust
Store / Set / Access
RETURN
Return to the previous
menu
EXIT
Exit the menu
OPTION
The same functions with
the OPTION button of the
equipment
red
green
yellow
blue
Access when the key words
are displayed on colour bar
•
Available VIERA remote control buttons:
(depending on the connected equipment)
Access the menu of the equipment
Display “VIERA Link Menu”
Select the
equipment you
want to access access
select
Select “VIERA Link Control”
VIERA Link Control
Speaker Selection
VIERA Link Menu
Home Cinema
Recorder
select
Operate the menu of the equipment

Advanced
•External Equipment
Connector
Recording / Playback
(equipment)
AV1 AV2 AV3
COMPONENT
DIGITAL
AUDIO
OUT
(Side of TV)
123
To record / playback videocassettes / DVDs
(VCR / DVD recorder)
To watch DVDs (DVD player)
To watch camcorder images (Video camera)
To watch satellite broadcasts (Set top box)
To play games (Game equipment)
To use amplifier with speaker system
Q-Link
Direct TV Recording
VIERA Link
VIDEO
RGB
S VIDEO
VIDEO
RGB
AV
AV2AV1
L
R
Y
PB
PR
PC
AUDIO OUT
DIGITAL AUDIO OUT
V
I
D
E
O
A
U
D
I
O
C
O
M
P
O
N
E
N
T
L
R
HDMI 1 HDMI 2
Y
PB
PR
L
R
38
39
These diagrams show our recommendations for how to connect the TV to your various equipment.
For other connections, consult the instructions for each piece of equipment, the table below, and the
specifications (p. 47).
(VIDEO)
or
(S-VIDEO)
(AUDIO)
: Recommended Connection
Headphones
Camcorder / Game equipment
■Types of connectable equipment to each connector
External Equipment
■
To adjust volume
“Headphone
Volume” in the
Sound Menu
(p. 20)
(M3 stereo
mini plug)
Computer
Amplifier with speaker system
PC
(Viewing)
(Listening)
To listen with speakers
Conversion adapter
(if necessary)
Set top box DVD Recorder / VCR
SCART
cable
RF cable
or
SCART cable
To watch satellite broadcasts To record / playback
To watch DVDs
DVD player
SCART
cable
Fully wired HDMI
compliant cable
(Viewing)
(Listening)
Camcorder /
HDMI equipment
■
Easy playback, Easy control
only with VIERA remote control
■
Home Cinema
Panasonic DVD Recorder,
HD Video Camera, etc.
Panasonic
Amplifier
Panasonic DVD Recorder
Speaker system
Panasonic
Player theatre
HD Video Camera
•
Use fully wired HDMI compliant cable.
•
Read the manuals of the equipment too.
or
or
or
VIERA Link (p. 36)
Speaker system
Fully wired HDMI
compliant cable
Optical digital audio cable