Panasonic TX-28MD4P User manual

Colour Television
TX-28MD4P
TX-25MD4P
TX-21MD4P
EURO4 Chassis
SPECIFICATIONS
(Information in brackets { } refers to model TX-25MD4P)
(Information in brackets [ ] refers to model TX-21MD4P)
Power Source: 220-240V AC, 50Hz
Power Consumption: 130W [115W]
Aerial Impedance: 75Ωunbalanced, Coaxial Type
Stand-by Power
Consumption: 1,8W
Receiving System: PAL B/G, H, D/K, PAL-525/60
SECAM B/G, D/K
M.NTSC
NTSC (AV only)
Receiving Channels:
VHF E2-E12 VHF H1-H2 (ITALY)
VHF A-H (ITALY) VHF R1-R2
VHF R3-R5 VHF R6-R12
UHF E21-E69 CATV (S01-S05)
CATV S1-S10 (M1-M10) CATV S11-S20 (U1-U10)
CATV S21-S41 (HYPERBAND)
Intermediate Frequency:
Video/Audio
Video 38,9MHz
Audio 33,4MHz, 33,16MHz
32,4MHz, 33,05MHz, 32,66MHz
Colour 34,47MHz (PAL)
34,5MHz, 34,65MHz (SECAM)
Terminals:
AUDIO MONITOR OUT Audio (RCAx2) 500mV rms 1kΩ
AV1 IN Video (21 pin) 1V p-p 75Ω
Audio (21 pin) 500mV rms 10kΩ
RGB (21 pin)
AV1 OUT Video (21 pin) 1V p-p 75Ω
Audio (21 pin) 500mV rms 1kΩ
AV2 IN Video (21 pin) 1V p-p 75Ω
Audio (21 pin) 500mV rms 10kΩ
S-Video IN Y: 1V p-p 75Ω
(21-pin) C:0.3V p-p 75Ω
AV2 OUT Video (21 pin) 1Vp-p 75Ω
Audio (21 pin) 500mV rms 1kΩ
Selectable output (21 pin)
AV3 IN Audio (RCAx2) 500mV rms 10kΩ
Video (RCAx1) 1V p-p 75Ω
High Voltage: 28,5kV ±1kV {28,2kV ±1kV}
[28kV ±1kV]
Picture Tube: A66ECF50X41 66cm
{A59ECF50X41 59cm}
[A51ECQ51X01 51cm]
Audio Output: 2 x 15W (Music Power)
8ΩImpedance
Headphones: 8ΩImpedance
3,5 mm
Accessories
supplied : Remote Control
2 x R6 (UM3) Batteries
Dimensions:
Height: 580 mm {531 mm} [478 mm]
Width: 666 mm {601 mm} [525 mm]
Depth: 472 mm {439 mm} [480 mm]
Net weight: 31kg {25kg} [22kg]
Specifications are subject to change without notice.
Weights and dimensions shown are approximate.
NOTE: This Service Manual should be used in conjunction with
the EURO4 Technical guide.
ORDER No. SM-98033