Panasonic MC-CG523K747-KW User manual

© 2012 Panasonic Manufacturing Malaysia Berhad
(6100-K). Unauthorized copying and distribution is a
violation of law.
PMMA120507CE
Vacuum Cleaner
Model No. MC-CG523K747-KW
MC-CG523K747-NG
MC-CG523K149-QA
MC-CG523K149-PK
MC-CG523K149-OM
MC-CG523K149-LB
MC-CG523K149-JO
MC-CG523K149-EG
MC-CG523K149-AE
MC-CG523K149-LY
MC-CG523K147-AE
Destination:SD2, KUWAIT, NIGERIA AND UAE GEN-
ERAL MIDDLE EAST, PGF, EGYPT
AND AFRICA GENERAL
TABLE OF CONTENTS PAGE PAGE
1 Specifications ----------------------------------------------------- 2
2 Schematic Diagram---------------------------------------------- 2
3 Wiring Connection ----------------------------------------------- 3
4 Trouble Shooting Chart ---------------------------------------- 4
5 Disassembly and Assembly Instruction------------------ 6
5.1. Disassembly of Upper and Lower Body ------------- 6
5.2. Disassembly of Motor Case Set ----------------------- 7
5.3. Disassembly of Cord Reel Unit ------------------------ 8
5.4. Disassembly of Rail Base Unit--------------------------8
5.5. Disassembly of Fan Motor Unit-------------------------9
6 Exploded View and Replacement Parts List-----------10
6.1. Exploded View-------------------------------------------- 10
6.2. Attachment Exploded View---------------------------- 11
6.3. Packing Instruction --------------------------------------12
6.4. Replacement Parts List--------------------------------- 13

2
1 Specifications
2 Schematic Diagram
Model MC-CG523K Series
Power Source 220V~240V~50/60Hz
Input Power (Max) 1500W
Input Power (IEC) 1150-1350W
Power Control SLIDE
Dust Capacity 3.0L
Automatic Cord Rewind 0
Vac Gauge 0
Exhaust Filter NORMAL
Extension Wands METAL EXTENSION WAND
Blower Operation 0
Floor Nozzle 2-STEP
Dust Bag CLOTH BAG
Dimension (H x W x L) mm 240mm X 304mm X 450mm
Net Weight 4.5 KG
Cord Length 5.0 M
Cleaning Tools CREVICE TOOL / DUSTING BRUSH

3
3 Wiring Connection

4
4 Trouble Shooting Chart

5

6
5 Disassembly and Assembly Instruction
5.1. Disassembly of Upper and
Lower Body
Step 1 Open Dust Cover & remove Dust Bag.
Step 2 Release Dust Cover from Hanger.
Step 3 Remove 2 screws from the Front Side of the body..
Step 4 Release 2 catches using philip screwdriver.
Step 5 Remove Body Cover.
Step 6 Take out the filter.
Step 7 Release 4 catches using philip screwdriver to take out
the Cord Rewind pedal and Switch pedal.

7
Step 8 Remove 4 screws from back side of body.
Step 9 Take out Upper Body from Lower Body.
5.2. Disassembly of Motor Case Set
Step 1 Pull out the switch on/off .
Step 2 Remove Volume Ass’y from Motor Case Set.
Step 3 Pull up the Motor Case Set from Lower Body.

8
5.3. Disassembly of Cord Reel Unit
Step 1 Pull up the Cord Reel Unit.
Step 2 Remove 2 Connector Wires from Rail Base Unit.
Step 3 Release Printed Circuit Board (PCB) from catches.
5.4. Disassembly of Rail Base Unit
Step1 Remove the Cord Reel Unit from Rail base Unit by insert
a slotted screwdriver into the shaft of the Cord Reel Unit and
turning it 90counter-clockwise.
Step 2 Remove the Cord Reel Unit from the Rail Base Unit.
To assemble:
Step 1 Assemble in reverse order of the disassembly.
Step 2 Pretension the Cord Reel Unit.
-Turn the Cord Reel Unit holding on the plug
-Number of turns for pretension of the Cord is engraved on the
steel at the side of Cord Reel Unit.

9
5.5. Disassembly of Fan Motor Unit
Step 1 Pull up Motor Set.
Step 2 Remove the Silicon Cloth.
Step 3 Disconnect 2 Wire Terminals.
Step 4 Remove Motor Support Rubber.

10
6 Exploded View and Replacement Parts List
6.1. Exploded View
B26
B28
B27
B23
B25
B3
B21
B11
B9
B10
B8
B13
B15 B20
B17
B5
B19
1
B24
B29
B20
B2
2
3
3
3
3
3
B2
B1
B18
B22
Plug
3
B16
B7
B12
1
B14
B4
B6 Plug C3
Plug E2