Panasonic MC-CG711 User manual

© 2011 Panasonic Manufacturing Malaysia Berhad
(6100-K). Unauthorized copying and distribution is a
violation of law.
PMMA110926CE
Vacuum Cleaner
Model No. MC-CG711
TABLE OF CONTENTS PAGE PAGE
1 Specifications ----------------------------------------------------- 2
2 Circuit Diagram --------------------------------------------------- 2
3 Wiring Connection Diagram ---------------------------------- 3
4 Disassembly and Assembly Instruction------------------ 4
4.1. Disassembly of Upper and Lower Body ------------- 4
4.2. Disassembly of Motor Case Set ----------------------- 5
4.3. Disassembly of Cord Reel Unit ------------------------ 6
4.4. Disassembly of Rail Base Unit------------------------- 6
4.5. Disassembly of Fan Motor Unit ------------------------ 7
4.6. Disassembly of P.C.B. Ass’y---------------------------- 8
5 Trouble Shooting Chart ---------------------------------------- 9
6 Exploded View and Replacement Parts List -----------11
6.1. Exploded View --------------------------------------------11
6.2. Attachment Exploded View ----------------------------12
6.3. Packing Instruction---------------------------------------13
6.4. Replacement Parts List ---------------------------------14

2
1 Specifications
2 Circuit Diagram
Model MC-CG711
Power Source 220V~240V~50/60Hz
Input Power (Max) 1900W
Input Power (IEC) 1500-1800W
Power Control SLIDE
Dust Capacity 6.0L
Automatic Cord Rewind 0
Vac Gauge 0
Exhaust Filter ANTI-BACTERIA
Extension Wands METAL TELESCOPIC WAND
Blower Operation 0
Floor Nozzle 2-STEP
Dust Bag CLOTH
Dimension (H x W x L) mm 265mm X 320mm X 500mm
Net Weight 6.5 KG
Cord Length 5.0 M
Cleaning Tools CREVICE TOOL / DUSTING BRUSH

3
3 Wiring Connection Diagram

4
4 Disassembly and Assembly Instruction
4.1. Disassembly of Upper and
Lower Body
Step 1 Open the Dust Cover.
Step 2 Remove the Dust Bag.
Step 3 Remove 4 screws from the front side and 2 screws from
bottom side of the body.
Step 4 Pull out the Exhaust Cover.
Step 5 Remove 3 screws from back side of the body.
Step 6 Hold the Upper Body and 1 of the wheel to lift up the
Upper Body.

5
Step 7 Place the set as diagram shown and disconnect the
Wire Terminal from switch at the Upper Body.
Step 8 Remove the Upper Body from Lower Body.
4.2. Disassembly of Motor Case Set
Step 1 Release Rear Cover from Screw Holders.
Step 2 Remove Rear Cover.
Step 3 Pull up the Motor Case Set from the Lower Body.

6
4.3. Disassembly of Cord Reel Unit
Step 1 Release the pretension of the Cord Reel Unit slowly by
holding on the Power Plug and pressing on the Brake Lever.
Step 2 Remove the Cord Reel Unit from the Motor Case Set by
inserting a slotted screwdriver into the shaft of the Cord Reel
Unit and turning it 90°counter-clockwise.
To assemble:
Step 1 Assemble in reverse order of the disassembly.
Step 2 Pretension the Cord Reel Unit.
-Turn the Cord Reel Unit holding on the plug
-Number of turns for pretension of the Cord is engraved on the
steel at the side of Cord Reel Unit.
4.4. Disassembly of Rail Base Unit
Step 1 Remove 1 screw.
Step 2 Release the Catch and pull upward.
Step 3 Remove the Faston Terminals on the Rail Base Unit.

7
4.5. Disassembly of Fan
Motor Unit
Step 1 Remove the Swivel Cap.
Step 2 Remove 1 screw from top and 2 screws bottom Motor
Case Set.
Step 3 Remove the Tabs.
Step 4 Lift up the Motor Case Unit
Step 5 Disconnect the Wire Terminal and remove the Motor
Set.

8
Step 6 Remove the Noise Supprassor Unit and Motor Support
Rubbers. 4.6. Disassembly of P.C.B.
Ass’y
Step 1 Disassemble the Volume by widening the Tab using
Screwdriver.
Step 2 Remove Volume Upward.
Step 3 Release Tabs and remove P.C.B. Cover.
To reassemble the unit, reverse the disassembly proce-
dure above.

9
5 Trouble Shooting Chart

10