Panasonic Omnivision PV-4611 User manual

Thank you for choosing
Panasonic
Omnivision
SuU0InNoS T [V Toa.
panes Bupa
Zld - Old
uonelado 21seg
Gld ~ Eld
Video Cassette Recorder
Y
mk
a
a
hà
a
^
Operating
Instructions
Plezes read these instructions carctulty batare attempting to conma:
operate or ad|uat thia product and eave Uns manuak
apáneh Quick Use Guide is included. Guía para rapida consulta an
español està Include.
=
E
m
=
a
c
C)
i
a
O
o
UoOHnguJoJu] 42410
J9AO07 428g ~ t'Zd
VOTSABOR (A)

Things You Should Know
Congratulations Date of Purchase
on your pisas of ane of me mon SO das pat ad Dealer Purchased From
reliable products on the market today. Used properly,
we're sure it will bring you and your family years of Dealer Address
enjoyment. Please take time to fill in the information at Dealer Phone No.
right. The serial number is an the tag located on the Model No. PV-4611
back of your VCR. You'll want to keep this manual
handy as your convenient VCR information source. Serial No.
Safety Precautions
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
This video recorder, equipped with the HQ (High Quality) System, is compatible with existing VHS
equipment.
Only use those tapes with the mark. It is recommended that only cassette tapes that have
been tested and inspected for use in 2, 4, 6, and 8 hour VCR machines be used.
This symbol warns the user that uninsulated voltage within
the unit may have sufficient magnitude to cause electric
shock. Therefore, it is dangerous to make any kind of
contact with any inside part of this unit.
SADEN RUIN MOOR This symbol alerts the user that important literature |
i Ren MENACE TRUE Cans ack concerning the operation and maintenance of this unit has
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL been included. Therefore, it should be read carefully in order
to avoid any problems.
Table of Contents
Important Safeguards and Precautioris...-...... Eee eigenes ria tai etr du canna eek: 3
Unpacking Your VCR and Featufes.....« iore cocotte orta lic diro QU iud 4
VCR and Cassette Information (Record Tab, Tape Speeds, Tape Cleaning, Specifications) ...................... 5
Basic Connection (Antenna and VCR, VCR and TV) .0oooocccconononnncoconnnocononncnnnonnnnnnanonononanrsrnccnnenaniness 6,7
Additional Connections (CATV, Audio/Video) ................ eee enm rnt ar rnnt nnns nns 8,9
Getting Started
One Time VCR Setup (On-screen Language, Channel Memory, Clock Set) ......cooococcnonoooncccconancncnnns 10, 1T .
On Screen Displays (OSD) (Function, Channel, Menu, VCR Status & Clock, Warning, Instruction) ............ 12
Basic Operation
Playback a Tape (Main Operation, Special Effects, Quality Picture Features) ................. eene 13
Tape Operation (Repeat Play, One Minute Skip, Zero Search, Auto Functions) .........cocoonorrccnncenccnccrnconnans 14
Record On a Tape (Main Operation, One Touch Record, Channel Selection, Rapid Tune) ......................... 15
More You Can Do
Timer Recording (Main Operation, Cancel-Ctear or Replace, Program Contents) ......................sssssss 16, 17
Timer Recording Using VCR Buttons ...................essesssseseseeeeeeneenen enne enhn enne nennen 17
Copying Your Tapes (Dubbing) (Connection, Main Operation, Monitoring, Select Input Mode) ................ 18
Special VCR Features (VCR Lock, Warning Beeper) ........coocrccccncnnnccccanocanoncncnanonenonennncnnnorennonaccnnos 19
VCR Plus+ Set Up (Cable Box Set Up, VCR Plus+ Channel Set Up)... 20, 21
VCR Plus+ Programming (Main Operation, Make Corrections) .............. cesses 22
Multi-Brand Control Feature ............... eee eene enne ernannt EE Ea saeua atrae kata rason anna oca naa rca nanss 23
Other Information
Before
Requesting
Service
(Self-check
items)
...............
isses
nennen
enne
ninos
24
Spanish
Quick
Use
Guide/Guía
para
rápida
consulta
............................
sess
25,
26
Index
of
Controls
(Remote
Control, VCR
)
............
eere
27,
Back
Cover
2

Important Safeguards and Precautions
INTRODUCTION
Careful attention has been given to this Video product to assure.
a quality standard devoted to your safety and enjoyment. This
quality standard together with your personal responsibility for
the safety of yourself and others, will contribute to your
enjoyment. This Video product uses electrical energy and
requires proper handling at all times.
READ AND RETAIN THE SAFETY AND OPERATING INSTRUCTIONS
To make full use of the safeguards incorporated in this unit, read
and follow this basic guide, adopted in part from Underwriter's
Laboratories Standard 1409, Second Edition, before operating
this Video product.
FOLLOW THE INSTRUCTIONS AND BE SURE TO HEED ALi.
WARNINGS on unit and in the manual, for easy maintenance,
proper and trouble free operation of this Video product.
INSTALLATION
1. OPERATE FROM A POWER SOURCE INDICATED on this
A Video product, or in this Manual. Your Electric Utility Service
Company or Video Products Dealer will be happy to verify
the power source in your home.
2. THE GROUNDED OR POLARIZED PLUG IS A SAFETY FEATURE
This Video product may be equipped with either a polarized
A 2-wire AC line plug or a 3- wire grounding type plug. The two
wire polarized plug (having one blade wider than the other)
will fit into the power outlet only one way. If it is a three wire
grounding type plug (having a third pin), it will fit into a
grounding type outlet.
DO NOT DEFEAT THE SAFETY PURPOSE OF THE GROUNDED
OR POLARIZEO PLUG by tampering with it. If the plug does
not fit fully into the socket, try reversing it. If you should still
be unable to fully insert the plug into the socket, you may
find that a proper outlet is needed to meet today's Electrical
Standards. An electrician will replace your outlet safely.
3. POWER SUPPLY CORDS SHOULD BE PROTECTED and
routed so that they are not likely to have anything rest on
A them, roll over them, or be subject to walking traffic or
abuse: particularly at plug-ins, convenience receptacles, or
cord exit points from the unit. Where an extension is
needed, use a grounded or polarized cord.
HAZARDOUS FRAYED CORDS OR DAMAGED PLUGS
SHOULD BE REPLACED BY A QUALIFIED SERVICE
TECHNICIAN.
OVERLOADED WALL OUTLETS AND EXTENSION
CORDS PRESENT DANGEROUS RISKS OF FIRE OR
ELECTRICAL SHOCK.
AVOID BLOCKING VENTILATION HOLES
Your video unit has ventilation openings in íts cabinet to
release heat generated during operation. Blocking these
opening can cause heat build-up inside the unit, causing
failure that may result in a fire hazard or heat damage to
cassettes. For protection:
a. Never cover the bottom ventilation stots or the unit with
soft material, or operate the unit placed on a bed, sofa,
rug, or soft accessory.
b. Avoid built-in installations, such as a bookcase or rack,
unless proper ventilation is provided.
5. AVOID EXTREMELY HOT LOCATIONS OR SUDDEN
CHANGES IN TEMPERATURE such as placing the unit
near or over a radiator, in direct sunlight, closed vehicles, or
transporting it suddenly between areas
of extreme temperature variation.
If the unit is suddenly moved from a cold
place to a warm place, moisture may
form on the tape and inside the unit.
6. TO AVOID INJURY TO A CHILD, ADULT;
OR COSTLY DAMAGE:
A a. Do not place unsecured equipment on a sloping surface
or any heavy object or unit.
(Use the unit in a horizontal position and do not place
anything heavy on it.)
b. Support for the unit should be adequately firm, level, and
strong. Replace any unstable cart, table or support. An
appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
c. Carefully follow all operating instructions and use the
manufacturer's recommended accessories when
operating this unit or connecting it to any other equipment.
>»
OUTSIDE ANTENNA, EQUIPMENT, AND POWERLINE EXPOSURE
1. INSURE SAFE ANTENNA
AND CABLE CONNECTIONS
If an outside antenna or cable
system is connected to the
act equipment, be sure the
DISCHARGE UNIT antenna or cable system is
quc RECTION ee) grounded so as to provide
some protection against built
NEC - NATIONAL
ELECTRICAL CODE
GROUNDING
CONDUCT
c EM x
DT > mec azcron me.) Up Static charges and voltage
E GROUND CLAMPS surges. Part 1 of the Canadian
+ —-POWER SERVICE Electrical Code, in USA
ELECTRODE SYSTEM Section 810 of the National
(MEC ART 250, PART H)
Electrical Code, ANSU/NFPA
70, provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of
antenna discharge unit, connection to grounding electrodes and
requirements for the grounding electrode.
2. ELIMINATE ANTENNA PROXIMITY TO HIGH VOLTAGE POWER
SOURCES, OR CHANCE OF ACCIDENTAL CONTACT BY INSTALLER
A An outside antenna system should be located where it will never be
reached by power lines, electric light or power circuits and where it
will never contact these power sources if it falls. Installer should use
extreme care to avoid possible fatal contact by touching power lines,
circuits or other power sources when installing an outside antenna.
AFTER STORING OR WHEN MOVING THE UNIT, REFER TO THE
INSTALLATION SECTION OF THE SAFEGUARDS.
1. DO NOT USE THIS VIDEO UNIT NEAR WATER: around bathtubs,
A^ sinks, laundry, wet basement, swimming pool or any water source.
2. USE ACCESSORIES RECOMMENDED ONLY BY THE
A MANUFACTURER to avoid risk of fire, shock or other hazards.
3. UNPLUG ALL EQUIPMENT EXPOSED TO RAIN, MOISTURE, OR
A STRONG IMPACT AND GET A QUALIFIED INSPECTION
If your unit has been exposed to rain, water, excessive. moisture, or
subjected to strong impact, unplug it and have it inspected by a
service technician before use.
4. UNPLUG UNUSED UNIT, AND ALL EQUIPMENT DURING A STORM
A During a lightning storm, when indoors or outdoors, or before
leaving unit unused for extended periods of time, disconnect all
equipment from power source, antenna and cable system.
5. UNPLUG ALL EQUIPMENT BEFORE CLEANING. After unit has
A been unplugged use a dry, clean, chemically untreated cloth. Use
no cleaning fluids, aerosols, or forced air that could over-spray, or
soak into the unit, and cause electrical shock. Any substance such
as wax, adhesive tape, etc. may affect the cabinet surface.
Exposure to greasy, humid, or dusty areas may affect internal parts.
WHEN PLUGGED-IN: KEEP WATER AWAY; NO FINGERS
INSIDE NOR ANY OBJECTS INSIDE; AND NO MAGNETS OR
ELECTRICAL INTERFERENCE NEARBY.
a. Never operate the unit if liquid has been spilled into it.
immediately unplug the unit, and have it inspected by a service
technician. Fire and shock hazards can result from electrical
shorts caused by liquid contact inside.
b. Caution the children about dropping or pushing objects into the
unit. Some parts inside carry hazardous voltages and contact can
cause electric shock. Objects dropped in electrical equipment can
cause fire hazards.
c. Separate the unit from any interference causing appliances.
Placing the unit directly above or below your TV set may cause
electrical interference. Keep all magnets away from electronic
equipment.
SERVICE
1. DONOT ATTEMPT TO SERVICE THIS PRODUCT YOURSELF. If
A this Video product does not operate as described, when the detailed
Operating instructions are followed, do not attempt to open or
remove covers, or make any adjustments not described in the
manual. Attempting to service this unit yourself may expose you to
dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
2. CHECK ON REPLACEMENT PARTS REQUIRED. Be sure the
service technician has used replacement parts specified by the
A manufacturer or having the same characteristics as the original
part. Unauthorized substitutes may result in fire, electric shock or
other hazards.
3. HAVE TECHNICIAN PERFORM SAFETY CHECK described in
A^ the manufacture's service literature, after any service or repairs, to
determine that the Video unit is in safe operating order.
Ty
3

Unpacking Your VCR and Features
Unpacking Your VCR
The accessories shown below are provided to help
you use or set up your VCR.
Optional accessories are also listed.
Accessories Load the batteries in the Remote Control
L} Remote Control
VSQS1416
pressing in and up on
the latch with your thumb
nail or other narrow object.
1 Lift off the lid after
2 "AA"
Batteries
Install two batteries
as indicated inside the
ge Battery Compartment.
RF Coaxial
Cable
VJAS0183 Fit the lid's hinge piece
3 into the indent on the
case, and snap lid into place.
Optional Accessories
* 1/2" Video Cassette Tape
Battery replacement caution
* Do not mix old and new batteries. (Also, never mix
alkaline with manganese batteries.)
Product Features
All Channel Auto Set/181-CH TV/CATV Tuner ................ sese enenatis nennen 10
Auto Daylight Saving TIMO iria 5
Auto Operation Functions (Auto Playback, Rewind, Tape Eject, Power off) ...oococicicnininonnmoonornaccanocinacinonno 14
Auto Repeat FUlCHOLD ostra E tiles 14
Digital Auto PIGIUFO- ibn Ei ds 13
Easy-to-Read English/Spanish/French On Screen Displays ................................... 10, 11, 16, 17
Multi Brand TV/Cable Box Remote Control ..........o..cooooooccncnccnnccncconcconnanancnnnonoconoanocanononoracoonononos 23
Ones MItule SII nta daa 14
One Month, 8 Program Timer Recording ........................ sesenta ennt 16, 17
Ore Touch Recording (OVA) ai 15
Program Director Remote Control ...4.. rone eroe rens sano ina narro nna Xn Vae Pa dn nd ae pua dadas 16, 17
Quick
Play
Mocha
m
«soe
e
utar
ton
ace
totius
EEE
E
dod
eod
24
Rapid MEUS NE E EE E E 15
Special
Effects
Playback
:...-
ose
ad
sd
e
oret
ri
13
Special
VCR
Features
(VCR
Lock,
Warning
Beeper)
...ocoonoonononccnoncnnnonnnnanenenenonscin
cascara
tnter
19
VOR
Plus+
Recordi
ect
eps
20,
21,22
A
O
II
-ceeiccn
dectde
EE
cBeos
ameuccusees
14
4

Erase Protection (Record Tab)
Cassettes have a record tab to ensure that
recordings are not accidentally erased.
y
To prevent accidental
erasure, break off the tab
with a screwdriver.
To record again, cover the
hole with cellophane tape.
Maximum Record/Playback Time
Only use tapes with the VHS] mark in this unit.
5 Hours
20 Minutes
Blue Back
or
(During playback of
pre-recorded tape)
Clogged Video Blue Back
Head Picture Screen
Clogged Video Heads
While
your
VCR
will
not
normally
require
head
cleaning,
however
the
heads
may
become
clogged
when
playing
an
old
or
damaged
tape.
If
the
image
on
your
screen
resembles
the
illustration
on
the
left
or
the
screen
becomes
solid
blue
when
playing
back
a
pre-recorded
Signal
on
the
tape,
the
heads
probably
require
cleaning.
Cleaning the Heads
itis
recommended
that
head
cleaning
be
performed
by
a
qualified
service
technician.
Please
contact
your
nearest
Panasonic
Service
Center.
An
alternate
Solution
is
to
obtain
a
head
cleaning
cassette.
Be
sure
to
follow
the
cleaning
instructions
carefully.
Excessive
use
of
a
cleaning
cassette
could
shorten
head
life.
Use this cassette only when symptoms occur.
, VCR and Cassette Information
Reset all VCR Memory Functions
This operation is convenient when moving the VCR to a new
location, or if a mistake was made in the One Time VCR
Setup section. Make sure a tape is not inserted in the VCR.
1) Turn VCR Power on.
2) Press and hold both Play and Rewind buttons on the
VCR for more than 5 seconds.
* The power will shut off.
3) Perform the One Time VCR Setup sectíon on page 10.
D.S.T. (Daylight Saving Time)
Spring:
First Sunday in April (DAYLIGHT SAVING TIME:AUTO)
Automatically adds one hour and adjusts the clock.
NORMAL
TIME
992.
2:00
a.m.
DAYLIGHT
SAVING TIME
Autumn:
Last
Sunday
in
October
(DAYLIGHT
SAVING
TIME:
AUTO)
Automatically
turns
back
one
hour
and
adjusts
the
clock.
DAYLIGHT 1:00 a.m. 2:00 a.m.
SAVING TIME i
NORMAL TIME
A
3:00 a.m. 4:00 a.m.
i—mar
1:00 a.m. 2:00 a.m.
120V AC, 60 Hz
Power
Consumption:
Approx.
18
watts
(Power
on)
Approx. 6 watts (Power off)
ElA Standard NTSC color
Video
Recording
System:
4
rotary
heads
helical
scanning
system
Audio Track: 1 track (Normal)
Tuner:
Broadcast
Channels:
VHF
2-13,
UHF
14-69
CATV
Channels:
Midband
A
through
i
(14-22)
Superband
J
through
W
(23-36)
Hyperband
AA-EEE
(37-64)
Lowband
A-5-A-1
(95-99)
Special
CATV
channel
5A
(01)
Ultraband
65-94,
100-125
Operating
Temperature:
41°F~104°F
(5°C~40°C)
Operating Humidity: 10%~75%
Weight:
7.9
lbs.
(3.6
Kg)
Dimensions:
14-3/16"
(W)
X
3-1/2”
(H)
X
11-1/4"
(D)
360 (W) X 89 (H) X 285 (D) mm
Note:
Designs
and
specifications
are
subject
to
change
without
notice.

Basic Connection
ANTENNA
INDOOR ——— OUTDOOR —— Cable TV
ANTENNA ANTENNA
Disconnect the antenna or cable
from your TV and connect it to the
VCR (IN FROM ANT.)
VCR
>
i Antenna Cable
ap
Q
ð A it
Re
Set the Output Channel
of your VCR
to channel 3 or 4 (whichever is not being
transmitted on by a Local TV broadcast).
RF Coaxial Cable
(VCR-TV Connection Cable) (supplied)
Connect the VCH to your TV
with the RF Coaxial Cable (OUT TO TV).

Between Antenna and VCH Between VCR and TV
Ssuonoouuo2
Case 1: Twin Lead Cable Only Case 1: Screw & Plug Type Terminal
To VCR Terminal UHF/VHF Band Separator TV VHF
o il (not supplied)
o
—
HO
i
(Flat) Twin Lead 300 300-75 ohm Transformer ——LdMx DO»
Ohm Cable (not supplied) UHF
RF Coaxial Cable
Case 2: Twin Lead & Coaxial Cables Case 2: Screw Type Terminal
75-300 ohm Transformer
p (not supplied)
Ue
UHF/VHF
pu
Band Mixer
(not supplied)
VHF
or
UHF
Case 3: Double Screw Type Terminal
(Round)
75
Ohm
UHF/VHF
Band
Separator
TV
coaxial
Cable
To
VCR
Terminal
(not
supplied)
VHF
Case 3: Two Twin Lead Cables
Case 4: Complex TV Terminal
Band
Mixer
TERMINALS
ON
BACK
OF
TV
SET
(not supplied)
300-75 ohm Transformer
(not supplied)
To VCR Terminal
Split out
ANT1
* If your TV has both post and screw-type VHF
terminals, using the post connection is
recommended to minimize signal loss.
* Connect to one of the ANT terminals and select
the same antenna number on the TV.

Additional Connections
CATV(Cable) Connections
All connections on this page are made with 75 Ohm coaxial cables.
Without a Converter/Descrambler Box
IN FROM ANT.
You can:
1) Use your VCR Remote Contro! to select channels.
2) Program one or more unscrambled channels for
unattended recording.
NOTE: You cannot record or view scrambled
channels with this connection.
You can:
1) Record and view any channel including
scrambled channels; channel selection
must be made at the Cable TV Converter
Box.
Program one channel for unattended
recording.
You can:
1) Use your VCR Remote Control to select channels.
2) Program unattended recordings of more than
one unscrambled channel.
NOTE: You cannot record scrambled channels with
this connection.
Converter
Box
With Two Converter/Descrambler Boxes
If
you
want
to
record
and
view
Converter
Box
1
a combination of scrambled IS
and unscrambled channels, Oo INFROMANT. YOR
you wili need additional
equipment.
This connection requires
two converter boxes,
an A/B switch, and
a 2-way splitter
as shown here.
y
Splitter our YH ll
Se
Tí Converter
OUT 2 Box 2
S
ae “ OUTTOTV
Coaxial Cable
pl
A/B Switch

With a DSS Receiver
IN FROM
: CABLE or
e
,
Antenna
IN
FROM
OUT
TO
TV
1) Record and view any channel including Satellite Dish
scrambled channels; channel selection
must be made at the DSS Receiver.
2) Program one channel for unattended
recording.
NOTE: The DSS receiver must be turned
off to view programs from a cable
box
or
antenna.
See
the
DSS
s
sS
SY
manual
for details.
VHF/UHF
**DSSÓ is a registered trademark of DIRECTV, INC., a unit of GM Hughed Electronics.
Suonoouuo?
Audio/Video Connections
If your TV has AUDIO IN and VIDEO IN terminals, you can connect your VCR to them to receive a higher quality
picture and sound. The antenna-VCR and VCR-TV connection is as shown.
Audio/Video Connections
AUDIO OUT
VIDEO IN
1 Connect the VIDEO OUT terminal on the VCR to the VIDEO IN terminal of your TV.
2
Connect
the
AUDIO
OUT
terminals
on
the
VCR
to
the
AUDIO
IN
terminals
of
your
TV.
3 Set the VIDEO/TV selector of your TV (Monitor/Receiver) to "VIDEO."
NOTE:
To
use
your
TV
as
a
VCR
monitor,
set
the
VIDEO/TV
selector
on
the
TV
(Monitor/Receiver)
to
"VIDEO."
Note to CATV system installer:
This
reminder
is
provided
to
call
the
CATV
system
installer's
attention
to
Article
820-40
of
the
NEC
in
USA
(and
to
the
Canadian
Electrical
code
in
Canada)
that
provides
guidelines
for
proper
grounding
and,
in
particular,
specifies
that
the
cable
ground
shall
be
connected
to
the
grounding
system
of
the
building,
as
close
to
the
point
of
cable
entry
as
practical.

b One Time VCR Setup
When the VCR is first t don,
the
language
select
dnd
channel
auto
Set
To
Set
Language,
Channels,
and
Clock
screen appear automatically followed by P dne
a prompt to set the clock.
QD. O . Turn TV on and VCR on.
D
(A check list before you begin. |
LJ. All TV and VOR connections are made. DY is set to VCR channel (the Same one you set
(See
pages
6-9.)
on
the
back
of
the
VCR
CH3
or
CHA.)
(See
page
6.)
O g; paa [aru
O: l dol S PUSH VCR CH a: ENGLISH
LCH / plays. PULSE VCA CH Y: ESPAÑOL
p
qd
cud
or
APP.
VCR/
TV
:
FRANCAIS
| e j Spanish on-screen If you set the wrong
VCR/IV VERCH | v , displays. language,
Up/Down
MAP:
see
the
“Reset
all
VCR
or Memory Functions”
Í EA -i Push VCR/TV for section on page 5.
VAM | French on-screen « You cán also set by
Q . displays. using the same
buttons on the VCR.
Make sure the VCR is connected
to an antenna or cable.
If you use a cable box, the cable box
must be left on for auto channel set.
l T : Push VCR CH A to
Al - start Channel Auto Set.
' * The following on-screen displays appear in sequence:
t - . *CH AUTO SET COMPLETED"
"PLEASE SET CLOCK BY PUSHING MENU KEY"
* .— A Push MENU to display
; O the SET CLOCK screen.
©
| í : T
» ..-- -+ + Make entries within 5 BY ROTATING WHEEL
minutes, or the VCR exits -PUSH WHEEL?
the Set Clock screen. TO ENO PUSH MENU KEY
G6 9:09
‘ Rotate and push
_ the WHEEL to
| . select and set the
+ MONTH. BY ROTATING WHEEL
:PUSH WHEEL
TO END PUSH MENU KEY
è 7 Remaining items
Using the Select/Set Wheel . Rotate and push the :
:
|
WHEEL
to
set
remaining
t9
be
set:
There
are
basically
two types
of
Whee!
operation.
!
items
at
rig ht.
2v
*
Selecting
items
from
an
on-screen
display.
E
ON
|
ear
* Entering
information,
such
as
setting the clock.
D"
*
+
The
day
of
the
week
:
nme
OPERATION automatically appears. 9.1,
- See page 5 for more on D.S.T. (Daylight Saving Time)
Rotate (2) Push
nora”
Ma
^
—
'
i
Push
MENU
twice
TIT
Co
to
start
the
clock
2/
2/1906
FRI
1:30PM
¡ MENU | and exit this mode.
PUSHTO PUSH TO A wl)
SET SET
to make selection to enter selection TO START PUSH MENU KEY
10