Panasonic PV-C2023A User manual

[31rnnlvlmll3n
Panasonic
Combination VCR
Operating Instructions
Model No. PV-C2023A/PV-C2033WA
•Initial Setup and Connection Procedures are on pages 8 and 9. I
As an ENERGY STAR _Partner,
Matsushita Electric Corporation of America has
determined that this product or product model meets
the ENERGY STAR _guidelines for energy efficiency,
Please read these instructions carefully before attempting to connect,
operate, or adjust this product. Please save this manual.
SGPuanishQuick Use Guide is included.
ia para rapida consulta en espaSol esta inctuida.)

2
READ AND RETAINALL SAFETYAND
OPERATINGINSTRUCTIONS.HEED ALL
WARNINGSINTHEMANUALAND ON UNiT
INSTALLATION
OUTDOOR ANTENNA INSTALLATION

Safety Precautions/Mesures de sdcuritd
Wa ming :To preventfireor shock hazard,do notexpose this equipment torain or moisture.
Caution : To prevent electdc shock, match wide blade of plug towide slot, fully insert.
Avertissement : Afin de prdvenir tout risque d'incendie ou de chocs dlectriques, ne
pas exposer cet appareil &la pluie ou & une humiditd excessive.
Attention : Pour dviter les chocs 61ectdques, introduire la lame la plus large de la fiche
dons la bome correspondante de la prise et pousser jusqu'au fond.
This video recorder, equipped with the HQ (High Quality) System, is compatible with
existing VHS equipment. Only use those tapes with the _ mark. It is recommended that
only cassette tapes that have been tested and inspected for use in 2, 4, 6, and 8 hour VCR
machines be used. This television receiver provides display of television closed captioning in
accordance with §15.119 of the FCC rules.
FCC WARNING : Any unauthorized changes or modifications to this
equipment would void the user's authority to operate.
AThis symbol warns the user that uninsulated voltage within the unit may
have sufficient magnitude to cause electric shock. Therefore, it is
dangerous to make any kind of contact with any insidepart of this unit.
This symbol alerts the user that important literature concerning the
operation and maintenance of this unit has been included.
Therefore, it should be read carefully in order to avoid any problems.
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead.
Disposal of these materials may be regulated in your community due to environmental
considerations. For disposal or recycling information please contact your local authorities, or the
Electronics Industries Alliance: <http://www.eiae.org.>
Congratulations
on your purchase of one of the most sophisticated
and reliable products on the market today. Used
properly, it will bring you and your family years of
enjoyment. Please fill in the information below.
The serial number is on the tag located on the
back of your unit.
Date of Purchase
Dealer Purchased From
Dealer Address,
Dealer Phone No.
Model No.
Serial No.,
fAccessories
..--_ [] Remote Control
® "$ S LSSQ0278
_ _ (PV-C2023A)
_ LSSQ0279
_ (PV-C2033WA)
GD 1_) (D
_eo_ [] Batteries
2 "AA"
To order accessories,
call toll free 1-800-332-5368.
Battery replacement caution
• Do not mix old and new batteries.
• Do not mix alkaline with manganese batteries.
Break off the tab to
prevent recording.
Record
Tab Screwdriver
To record again.
Cover the hole
with cellophane tape. 3

LWJlJl[LII1|1 Lo A oJ | I
Playing older or damaged tapes may eventually
cause video heads to become clogged.
Head Clog Sensor
During playback this screen
appears if clogging is
detected. To remove screen,
press PLAY on the remote
or unit.
• Use "dry" type head
cleaning cassette only.
(Part No. NV-TCL30PT is recommended.)
• Follow cleaning tape directions carefully.
Excessive use of head cleaning tape can
shorten the video head life.
Digital Auto Tracking
Continuously analyzes the signal and adjusts for
optimum picture quality.
Manual Trackino Control (to reduce picture noise)
Use during Playback and Slow Motion mode to
reduce picture noise. Press the 3 or 6 number key
on the remote control or CH AV on the unit until the
picture clears up. To return to Auto Tracking, press
POWER off, then on again a few seconds later.
Only use tapes with the [_ mark in this unit.
Display
Picture Tube: 20 inch measured diagonal 90°
deflection Picture Tube
VCR
Video Recording 2 rotary heads helical
System: scanning system
Audio Track: 1 track
Tuner
Brcedcas__:
CABLE Channels:
FM Radio
Band Range:
General
Power Source:
PowerQ:ynsump_n:
VHF 2~ 13, UHF 14~69
Midband A through I(14 ~ 22)
Superband J through W (23 ~ 36)
Hyperband AA ~ EEE (37 ~ 64)
Lowband A-5 ~ A-1 (95 ~ 99)
Speda] CABLE channel 5A(01)
Uitraband 65 ~94, 100 ~ 125
87.5 ~ 108.1 MHz
120 V AC, 60 Hz
Power On
Approx. 11Owatts
Power Off
Approx. 2.5 watts
Television System: EIA Standard NTSC color
Speaker: 1 piece
O_T_ 5 oC ~40 °C (41 °F ~ 104 °F)
Operating Humidity:lg % ~75 %
Weight: 23 Kg (50.8 Ibs,
Dimensions: 515 (W) X 505 (H) X 474 (D) mm
20-5/18" (W) X 19-7/8" (H) X
18-11/16" (D)
Note: Designs and specifications are subject to
change witho_ notice.
Tape Speed Type of Video Cassette
Setting T60 T120 T160
SP(StandardPlay) 1 Hour 2 Hour 2 Hours
40 Minutes
LP (Long Play) 2 Hours 4 Hours 5 Hours
20 Minutes
SLP(SuperLongPby) 3Hours 6Hours 8Hours
Unit auto adjusts clock for DST (Daylight Saving
Time.)
• Spring (First Sunday in April)
DST : ON => Sets clock ahead one hour.
• Autumn (Last Sunday in October)
DST : ON => Turns clock back one hour.
• If your area does not observe Daylight Saving
Time, select DST:OFE
• Keep these time changes in mind when
programming the unit for timer recordings.
4

Important Safeguards and Precautions /Safety Precautions .... 2,3
Before Using ....................................................................................... 4
Unit Information ................................................................................. 4
Table of Contents ................................................................................ 5
Location of Controls ........................................................................... 6
Connections /Initial Setup (Ready to Play) .................................. 8,9
Reset Language, Channels, Clock, Time Zone Adjust ............. 10,11
Playback a Tape ................................................................................ 12
Record On a Tape ............................................................................. 12
Copy Your Tapes (Dubbing) ............................................................ 13
TV Operation .................................................................................... 14
Picture Adjustment .......................................................................... 15
TV Timer Features ....................................................................... 16,17
Closed Caption System .............................................................. 18,19
FM Radio ...................................................................................... 20,21
Timer Recording .......................................................................... 22,23
Tape Operation ........................................................................... 24-26
Special VCR Features ................................................................. 27,28
V-Chip Control Feature .............................................................. 29-31
On-Screen Display (OSD) ................................................................. 32
Before Requesting Service ............................................................... 33
Limited Warranty ......................................................................... 34, 35
Customer Services Directory ........................................................... 35
Spanish Quick Use Guide /Gufa para rdpida consulta ........... 36,37
Index .................................................................................................. BC

EJECT
Ejectstape,
POWER
Tams onor off the unit.
FM/TV
Receives FMradio signal,
MUTE
Mutesthe soundinstantly.
CHANNEL UPJDOWN
Selects a channel.
SELECT UP/DOWN
Controls navigation around
o_-t-screen menu.
ACTION --
Oisp{aysMainMenu,
NUMBER Keys
Selects echannel directly.
REW|ND/SEARCH
Rewinds tape, and searches
reverse scene. f
PLAY _
Begins playback, f
PAUSE/SLOW
Pauses and slow motion
and frame advance picture.
CM SKIP/ZERO SEARC
In Stop mode, goes to the
counter °O:00:0O." in Play mode,
skips over I to 3min_es of tope.
TAPE POSITION
Finds out present tape position
and amount of tape remaining.
SPEED /
Selects recording speed. /
COUNTER RESET_
Resets to "O:O0:O0"at
the desired position.
\\\\ /_ SLEEP
/Turns off the unit automat/catty.
/_ NtTE
Cob,," and p_cture intensity _evel
are adjusted dt_r_g night time use.
/'_ DISPLAY
Displays the VCR statue and
clock.
RAPID TUNE
Displays the last channel
you were watching.
LIP/DOWN
Adjusts volume,
SET/BACK SPACE
Sets a selected menu, or goes
back to correct.
Displays SET PROGRAM screen.
You can set Timer Program and
On-Timer.
UP/DOWN
Reducespicture noiseduring
Adds or deletes a channel.
Fast forwards tape, and searches
forward scene.
Goes directly to the desired
recording. Locates end point of
recording.
\ Records the program.
\'-- STOP
Stops recording or playback.
• When EJECT is pressed, the tape is ejected from Cassette Compartment.
If EJECT is pressed during recording, the unit will not respond to the command.
6

Built-In Speaker I
AUDIO VIDEO IN Jack I
For dubbing. I
POWER I
See previous page. |
/
VOLUME UP/DOWN
SET/BACK SPACE
See previous page.
CHANNEL UP/DOWN
TRACKING UP/DOWN
SELECT UP/DOWN
See previous page.
STOP/EJECT
See previous page.
ACTION
Presstogether withREW.
I
REWIND/SEARCH
See previous page.
ACTION
Presstogetherwith STOR
PLAY
See previous page.
REPEAT
Repeatsa recording.
FAST FORWARD/
SEARCH
See previous page.
REC
See previous page.
TIMER/FM
Sets a timer alarm up 60 rain,
Enables FM Radio,
'!I
PHONES Jack
Connect an
earphone or
headphones,
PROG TIMER
Indicator
Lights when the
unit is set for
Timer Recording.
ONTIMER
Indicator
Lights when the
On-Timer is set,
REC Indicator
Lights during
recording,
Remote Sensor
AC Power Plug
When plugged into an AC outlet, the
unit consumes 2.5 W of electric power
in an OFF condition.
VHF/UHF Antenna InputTerminal
In from your Antenna or Cable,
Page 8
7

i_A_Jgig_ A A ,i .....
Please make all cable or antenna connections before powering on.
For ANT.ICable
Connect the cable from Antenn
Cable to the VHF/UHF terminal
on the unit.
For DSS/Cable Box
Connect the OUT jack on your
cable box to the VHF/UHF
terminal on the unit with a RF
cable.
UNIT VHF/UHF
WARNING:
Overtightening "Nut type" RF coaxial cabtes
may damage lacks. Finger tighten only.
IN from
ANT/CABLE
1
Press POWER on the remote orunit. The unit comes on and auto
channel and clock set starts.
Plug the unit power cord into an
AC wall outlet. Settings are made automatically. When setup is
done, this screen appears.
•If you use a cable box, turn it on and set it to the
Public B_oadcastin9 Service (PBS) channel in
your time zone. If you use a DSS reciever, it
must be turned off.
If AUTO CLOCK SET IS
iNCOMPLETE screen
appears, set the clock using
MANUAL CLOCK SET
procedure on next page.
8

If AUTO CLOCK SET was incomplete, manually When moving unit to a new location, or if a
set the clock as follows, mistake was made in the Initial Setup section,
• Make sure a tape is not inserted in the unit,
Press ACTION on the remote to
display SET CLOCK Menu screen.
Press ••to select the month
and press • to set. In the same
manner, select and set the date,
year, time, and DST. (Daylight
Saving Time)
ill i iiii
E
IPower on.
•') Press and hold both PLAY and
f. FF on the unit for more than 5
seconds.
• The power will shut off.
• Please ignore "NO CASSETTE"
warning.
3Do "Initial Setup" on page 8.
Press ACTION twice to start
CLOCK and exit.
POWER
ACTION
_:_ ® o
(2_ (3D ODt
(2D QD QDI
800_
SELECT/SET
• :CH UP
_:CH DOWN
:VOL UP
• :VOL DOWN Note to CABLE System Installer
This reminder is provided to call the
CABLE (Cable TV) System Installers
attention to Article 820-40 of the NEC
that provides guidelines for proper
grounding and, in particular, specifies
that the cable ground shall be
connected to the grounding system of
the building, as close to the point of
cable entry as practical,
9

1Press ACTION
to display MAIN MENU.
== Language •Channels
1) Press &V•I_ to 1) Press AV< IP"to
selectlanguage I select "CH."
icon.
2) Press ACTION
repeatedty.
For Spanish
For French
For English
2) Press ACTION.
3) Press _I,V to select
"ANTENNA,"then
press • to set your
antenna system
('IV" or "CABLE").
4) Press AV to select
"AUTO SET," then
press •.
•After Channel Auto Set is
finished, Clock Auto Set
will be performed. 0f clock
is set manually, Clock Auto
Set w#+not be performed.)
3) Press AV• • to
select "EXIT."
Press ACTION to
exit.
• Clock
1) Press AV< • to
select "CLOCK."
2) Press ACTION.
("TfME ZONE ADJUST"
appears only when auto
clock is set,)
3) Press kV to select
"MANUAL" or
"AUTO CLOCK
SET" and press •.
• For Auto Crock Set,
select "AUTO CLOCK
SET," then press•,
4) Press &V and
press • • to select
and set the month,
date, year, time,
and DST (Daylight
Saving Time).
5) Press ACTION
twice to start the
clock and exit this
mode.
10

•Time Zone Adjust
(Only when Auto Clock isset.)
1)Press &V<I • to
select "CLOCK."
2) Press ACTION.
3) Press k_' to
select TIME ZONE
ADJUSTand
press •or• to
subtract or add
hour(s) as
necessary.
4) Press ACTION
twice to exit.
POWER --
ACTION-- _O_ __ SELECT/SET
• :CHUP
• :CH DOWN
• :VOL UP
_D (3DGO| • :VOL DOWN
QD QDQD!
(_D_ w.TQ_ __ NUMBER Keys
_" _ _ _ ADD/DLT
ACTION key on
the unit
¸¸¸¸¸FIE
On Unit J
You can operate the
menu screen using
unit buttons, To display
the menu, press STOP/
EJECT and REW
together with no tape
inserted. Toexit the
menu, repeat above
with or without tape
inserted unit normal
screen appears.
Using &_'<l •keys
On Renlote_ O_it
A:CHUP :
y:CH DOWN :
•:VOLUME liP
< :VOLUME DOWN
Whenever the menu Or
program screen is displayed,
CHANNEL UP/DOWN function
as Av and VOLUME UP/
DOWN function as _ • onty.
Add or Delete a Channel : /
To add channet: To de ete channe£
Select channel with Select channel with /
number keys and CH A.V or number keys
press ADD/DLT. : and press ADD/DLT. /
11

E_lPReady Check List
[] All connections aremade.
[] Your unit isplugged in.
Insert a cassette.
•The unitpowercomes
onautomatically.
To prevent tape jam,
remove loose or peeling
labels from tapes.
2Press PLAY. • Playbackbegins ifcassette has norecord
tab.
• FotwardlReverse scene search
=> Press FF or REW
=> Press PLAY to release.
•Still (Freeze) picture
=> Press PAUSE/SLOW
=> Press PLAY to release.
•Slow Motion picture
=> Hold down PAUSE/SLOW in
Still mode
=> Press PLAY to release.
• Frame by Frame picture
=> Press PAUSE!SLOW in Still mode
=> Press PLAY to release.
• These features work best in SLP mode.
• After the unit is in Still or Slow mode for 3
minutes, it will switch to Stop mode automatically
to protect the tape and the video head.
•Stop => Press STOP
•Rewind tape => Press REW in Stop mode
• Fast forward tape => Press FF in Stop mode
• Eject tape => Press EJECT on the remote or
STOP/EJECT on the unit
You can operate on the unit
CH•V
Insert a cassette. PLAY
• Press to stop and/or eject tape REC Indicator
12
Insert a cassette with record tab.
•The unitpowercomeson automatically,
Press CH AT or number keys
to select a channel.
• For"LINE" input,see bottom ofnext page.
Press SPEED to select recording
speed (see page 4).
SP = Standard Play
LP = Long Play
SLP = Super Long Play
• Selected speed isdisplayed.
Press REC to start recording.
• To edit out unwantedportions,prese
PAUSE/SLOW topause and resume
recording.
• You cannot viewanother channelduring
recording.
•Stop => Press STOP
• One Touch Recording (OTR)
Press REC repeatedly .,,N_ Re_O3_0o-_
to set the recording [., )
length (30_n -4 hours), 4oo*-3o_*-20o*-__o-,-.-
• The unitstops recording at apresettime.
• PROGTIMER indicator lightson the unit.
O
• After the unit has been in Rec Pause mode for
5 minutes, itwill stop automaUcally to protect
the tape and the video head.
• The remaining recording time of an OTR can be
displayed by pressing DISPLAY.
EJECT
ACTION _-
NUMBER
Keys
PLAY
REW
PAUSE/
SLOW
Q_ QD QD
(5O(30(30
mmm
-- DISPLAY
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
TRACKING
-- ADD/DLT
-- FF
STOP
REC
SPEED

Connections you'll need to make. Recording (Editing) unit
Playing (Source) VCR iiiiiiiiii!i
1
2
Insert pre-
recorded tape. Insert blank tape with
record tab.
•Dubbing tapes protected
with Copy Guard wilJhave
poor quality results.
Select "LINE" mode.
See "Selecting Input Mode" below.
_Press PLAY then Press REC, then
PAUSE at starting REC PAUSEPAUSE/SLOW
_ point to put in immediately to put in
Standby mode. SLOW Standby mode.
(Perform operation of steps 4 and 5 on both units at same time,)
4Press PLAY
to start dubbing. P_ iPress PAUSE/SLOW
to start dubbing.
SLOW
IPress STOP
to stop dubbing. ]Press STOP
to stop dubbing.
J
_rized exchanging
and/or copying of copyrighted
recordings may be copyright
/ infringement.
Method 1:
Press CH AV. The display will change as follows.
1,_.2<--_3
Method2:
a PressACTION for MAIN MENU.
b Press AV<l,to select"TV", then press
ACTION for SET UP TV screen.
cPress AV to select "INPUT SELECT," and
then press • to select "TUNER" or "LINE."
dPress ACTION twice to exit this mode, 13

k'J LwJ _l:_ _AqLO_
Press POWER on the remote or unit.
Use CH &V or
number keys to
select a channel.
_'Ready Check List
[] All connections aremade,
[] Your unit is pluggedin.
3Press VOL + or VOL
-to adjust volume.
VOL+/VOL-
Color and picture intensity levels are adjusted so the screen
is easier on your eyes during night time use.
Press NITE to set
NIGHT mode.
• NIGHTmode may be
selectedwhen watchingTV
or playingatape.
Press NITE to cancel.
• Previoussettingsarerestored.
• NIGHTmode iscanceled
when poweristurned offer
powerfailure occurs.
mtlilil_ • _.......
Jack
POWER
•Using the 100 key
When selecting CABLE channels100 to 125 withthe numberkeys,first press the 100
key,and then enterthe remaining twodigits,
•Rapid Tune
Press R-TUNE to display the last channelyouwerewatching,
•Audio Mute
Press MUTE to instantly mute the sound, Press again to restore the previous sound level.
• Phones
Connect an earphone (not supplied) or headphones (not supplied) to the Phones Jack,
14

I i LO LIOJlL r o oJb.-lqJIJIL:. llq
Press ACTION to display MAIN MENU.
21)Press AV• • to
select "TV."
2) Press ACTION to
display SET UP TV
screen.
POWER
MUTE
VOL UP/_
DOWN
ACTION j
100 KEY
I _ Nr_
ooo
NITE
/RAPID
TUNE
SELECT/SET
• :CH UP
_:CH DOWN
:VOLUP
• :VOL DOWN
\CH •V
Picture Adjustment
•COLOR Control
Adjust colorintensity,
•TINT Control
Adjust for naturalflesh tones,
•BRIGHTNESS Control
Adjust picturebrightness,
•PICTURE Control
Adjust pictureintensity by
adjustingboth contrastand
color level in the proper
balance,
•SHARPNESS Control
Adjust picture sharpness,
31)Press &V to select VIDEO ADJUST.
2) Press • to display
screen.
41) Press •V to select
an adjustment item.
(See below left.)
2) Press • • to
adjust.
To Reset Picture
Controls.
Press AV and • to
select and set
"NORMAL."
All controls return to
their factory settings.
Press ACTION three times to exit.
15

This unit can be set to automatically power on in one of 2
modes (TV, Playback, or FM radio).
YOU can also combine the On-Timer with aone minute
alarm that gradually increases in volume,
Press PROG to display SET PROGRAM
screen,
1)Press AI,V to select
"ON TIMER."
Press • to display
screen.
_IP Ready Check List
[1 Thedock issetto thecorrecttime.
3
• ON-TIMER mode
selection order
_,_CH02--CH03.,'"CH125"_
CH01 PLAY
I_FMg--FM8 -,...FMI ._,J
1)Press AV to select
desired settings.
2) Press • to set theI
ON-TIMER TIME or
ON-TIMER mode.
• Make sure a tape is
inserted if Playback mode
isselected,
• See "FM Radio" on
pages 20 and 21 for
instructions on how
to preset FM stations.
4Press AY to select
ALARM "ON" or
"OFF."
TIMER
CFIA_I' ON T_MER
indicator
When "ON" is selected,
an alarm wilt graduatty increase involume for one
minute or until canceled by pressing any button
(including VOL + -),
TO Make Corrections,
use Ay and • • to move back and correct.
Press PROG to set ON TIMER.
•"ON TIMER SET" is displayed.
•ON TIMER Indicator Dightson the unit.
TO Cancel ON-TIMER,
Repeat steps 1and 2. Then, press ADD/DLT to
clear the time in step 3. Now, press PROG to end.
"ON TIMER END" briefly appears on-screen.
16
• If no b'dt_onon the remote or _nR
(including a button used to tam off
the alarm) is pressed within 60
minutes after unit tarns itself On,
it will turn itself back off.

©o©
(2D QD QD
(23 Q_ _
Mm_m
_ O{3B O |
/SLEEP
DISPLAY
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
\ PROG
_-ADD/DLT
This unit can be set for auto power off.
Press SLEEP repeatedly SLEEPTIMER30
to set SLEEP TIMER.
•Pressing DISPLAY with SLEEPTIMER 60
sleep timer set displays _,
remaining time. SLEEPTIMER 90
Press SLEEP repeatedly
until "SLEEP TIMER 00" SLEEPTIMER00
appears to cancel.
You can set a timer alarm up to 60 min. Useful when you are
cooking, etc.
Press TIMER on the unit to display the
instant alarm CANCEL/SET screen.
r1:00 (oneminute)
I
2:00
I one-minute
3ioo increase
i i untillO:OO
9:00
I
i_I01:00 ,,
i
, 15:00
' I five-minute
i
i 20:00 increase
: I until3O:OO
: 2:00
,I
L 30:00
! I
40:00 ten-minute
tI increase
5O:00 until60:00
i I
J00 (Max) t
O
• While timer function is in progress,
you can change channels on the unit
with CH A• while "CANCEL/SET"
screen is not displayed.
2Press CH AV on the
unit with CANCEL/SET
screen displayed to set
alarm. (Time changes in
the order shown left,)
[Remaining Time
• Pressing TIMER repeatedly on the unit
will change display as follows.
To cancel, press TIMER then press ADD/DLT on
the remote while CANCEL/SET screen is displayed,
To increase timer in progress, repeat step 2, Time
will be rounded up to next 1, 5, or 10 minute interval,
(See chart left,)
<Example>
• if current time remaining is 12:15, countdown will
restart from 15:00,
• if current time remaining is 9:15, countdown will
restart from 10:00,
Alarm will sound at 0: 00.
Press any button to stop.
•The volume of the alarm gradually increases
for one minute and then continues to beep
until any button is pressed, 17

Closed Caption is ...
This multFuse system notonlyallowsthe hearingimpairedtoenjoy selectedprograms,
but also makes usefulinformationfrom TV stationsavailable to everyone,
Press ACTION
to display MAIN MENU.
21)Press &Y< • to
select "TV."
2) Press ACTION to
display SET UP
TV screen.
1) Press AV to
select "CAPTION".
2) Press • to display
CAPTION screen.
4
F--ibOFE--'--_CAPCI
TEXT02 TEXTCI
LC_P ct_
1)Press Ak,V to
select CAPTION
MODE.
2) Press •
repeatedly to
select mode.
(See left.)
Press ACTION three times to return
to the normal screen.
Closed Caption Mode
Selections
Caption Mode: CAP C1 or C2
A narration of selected TV
programs is displayed.
Check TV program listings for
CC(Closed Caption)
broadcasts.
Caption Mode: TEXT C1 or C2
The lower hatf of the screen
will be blocked out. When the
TV sta*Jon broadcasts
information, such as program
listings, it will appear in this
space.
Caption Mode: OFF
Closed Caption /Text narration
will not be displayed.
NOTE :
The closed caption or text
signal may be broadcast over
C1, C2, or both. Also, text
contents can vary so you may
wish to try different settings.
Recording and Playing Back a Closed Caption/Text Program
Record: Record normatly.
Closed Caption/Text signal, if present, is recorded automatically.
Playback: Start ptayback. Do above steps to select desired caption mode.
18

_D(!3@
m_
JMUTE
SELECT/SET
• :CH UP
• :CH DOWN
• :VOL UP
• :VOL DOWN
\ACTION
Closed Caption narration, if available, isdisplayed
when MUTE button is pressed for silence.
Press ACTION to display MAIN MENU.
21)Press •V'_ • to
select "TV."
2) Press ACTION to
display SET UP TV
screen.
1)Press AV toselect "CAPTION".
2)Press • to display
CAPTION screen.
41)Press 4,V to
select CAPTION
MODE.
2) Press •
repeatedly to
select "OFF."
5
C°C
1)Press &,V to select
CC ON MUTE,
2) Press • repeatedly
to select desired
mode,
• Each pressof• will
change the display as
shown left.
• The captionmay be
broadcast overCAP C1
or C2,
Press ACTION three times to return to
the normal screen.
Press MUTE to mute the sound and
display closed captioning.
•To cancel, press MUTE again, 19

FM Radio is ..
Thisunithasan FM radiowithbuiit4nantenna,9 stationpreset,and a bandrangeof 87,5-
10&1MHz.Youcanevenset theOn.Timer(page16)towakeup toyourfavoriteradiostation,
Press FM/TV on the remote or
press TIMER/FM twice on the unit
to display FM radio mode.
Press a number
key (1-9) to
select the FM
number.
1)Press CH AT
to select the
desired radio
station. (_ca
_rreSschanges
eqt_ency200
KHz.)
2) Press ADD/
DLT to set the
radio station.
Hold down CH •
orY for afew
seconds, then
release to quickly
Scan for FM
stations in your
are8.
• TOcar_ce{,press
CH A or ql'while
in search mode.
TO Make Corrections,
select station with anumber key, then do
step 3again.
TO exit FM mode,
press FM/TV on the remote or TIMER/FM
twice on the unit.
Make sure FM tuning is done
correctly (see FM Radio Setup).
I Press ACTION
to display MAIN MENU,
1)Press AV_I I_
to select _TV."
2)Press ACTION
to display SET
UP TV screen,
31)Press &T to select FM
ANTENNA.
2) Press _ to
select "INT
(INTERNAL)_
or "EXT
•For cable IV users (EXTERNAL)"
=> "INT"
•For antenna users whichever
=> "EXT" SouRds the
best,
Press ACTION twice to end setup.
0-- II