Panasonic CJ-HDR104 User manual

HD Analog Recorder
Quick Start Guide
Model No. CJ-HDR104
CJ-HDR108
Version 1.0.2

i
Table of Contents
1Hardware Installation and Connection .........................................................................1
1.1 Check Unpacked DVR .........................................................................................1
1.2 About Front Panel and Rear Panel ....................................................................1
1.3 HDD Installation.....................................................................................................1
1.4 Front Panel.............................................................................................................2
1.5 Rear Panel..............................................................................................................3
2Local Login........................................................................................................................4
3Web....................................................................................................................................5

ii
Welcome
Thank you for purchasing our HD Analog Recorder (DVR)!
This quick start guide will help you become familiar with our DVR in a very short time.
Before installation and operation, please read the following safeguard and warning carefully!

iii
Important Safeguard and Warning
1．Electrical safety
All installation and operation here should conform to your local electrical safety codes.
The product must be grounded to reduce the risk of electric shock.
We assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
2．Transportation security
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and
installation.
3．Installation
Keep upwards. Handle with care.
Do not apply power to the DVR before completing installation.
Do not place objects on the DVR.
4．Qualified engineers needed
All the examination and repair work should be done by the qualified service engineers.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
5．Environment
The DVR should be installed in a cool, dry place away from direct sunlight, inflammable,
explosive substances and etc.
This series product shall be transported, storage and used in the specified environments.
6. Accessories
Be sure to use all the accessories recommended by manufacturer.
Before installation, please open the package and check all the components are included.
7. Lithium battery
Improper battery use may result in fire, explosion, or personal injury!
When replace the battery, please make sure you are using the same model!
Before your operation please read the following instructions carefully.
Installation environment
Keep away from extreme hot places and sources；
Avoid direct sunlight；
Keep away from extreme humid places；
Avoid violent vibration；
Do not put other devices on the top of the DVR；
Be installed in well ventilated place; do not block the vent.

1
1Hardware Installation and Connection
Note: All the installation and operations here should conform to your local
electrical safety rules.
1.1 Check Unpacked DVR
When you receive the DVR from the forwarding agent, please check whether there is any visible
damage. The protective materials used for the package of the DVR can protect most accidental
clashes during transportation. Then you can open the box to check the accessories.
Please check the items in accordance with the list. Finally you can remove the protective film of
the DVR.
1.2 About Front Panel and Rear Panel
For detailed information of the function keys in the front panel and the ports in the rear panel,
please refer to the User’s Manual included in the resource CD.
The model in the front panel is very important; please check according to your purchase order.
The label in the rear panel is very important too. Usually we need you to represent the serial
number when we provide the service after sales.
1.3 HDD Installation
This series DVR has only one SATA HDD. Please use HDD of 7200rpm or higher.
You can refer to the User’s Manual for recommended HDD brand.
Please follow the instructions below to install hard disk.
1. Loosen the screws of the
upper cover and side panel.
2. Fix four screws in the HDD
(Turn just three rounds).
3. Place the HDD in accordance with
the four holes in the bottom.
4. Turn the device upside down
and then turn the screws in
firmly.
in the chassis.
5. Fix the HDD firmly.
6. Connect the HDD cable and
power cable.

2
Note:
You can connect the HDD data cable and the power cable first and then fix the HDD in the
device.
Please pay attention to the front cover. It adopts the vertical sliding design. You need to
push the clip first and then put down.
1.4 Front Panel
The front panel is shown as below. See Figure 1-1.
Figure 1-1
Please refer to the following sheet for front panel button information.
Name
Icon
Function
Power button
Press this button to boot up or shut down the device.
USB port
Connect to USB2.0 storage device, mouse and etc.
Up
Down
/
Activate current controls, and then move up, move down
or jump.
Change setup, increase/decrease numeral.
Assistant function such as PTZ menu.
Switch channel when playback.
Left
Right
/
Switch current activated controls, move up and down.
When device is in 1-channel playback mode, use it to
control playback control bar process.
Cancel
ESC
Go to previous menu, or cancel current operation (Close
the top interface or controls).
When playback, click it to restore real-time monitor mode.
Confirm
ENTER
Confirm current operation
Go to default button
Go to the menu.
7. Put the cover in accordance
with the clip and then place the
upper cover back.
8. Secure the screws in the
rear panel and the side panel.

3
Name
Icon
Function
Assistant
FN
One-window monitor mode, click this button to display
assistant function: PTZ control and image color.
In menu control interface click to switch PTZ control
menu.
In motion detection setup, working with Fn and direction
keys to realize setup.
Backspace function: in numeral control or text control,
press it for 1.5seconds to delete the previous character
before the cursor.
In HDD information interface, click to switch HDD record
time and other information.
Realize other special functions.
Power indicator
POWER
Light turns on when power connection is OK.
Network indicatior
NET
Light turns on when network connection is abnormal.
Alarm indicator
ALARM
Light turns on when alarm occurs.
HDD indicator
HDD
HDD error occurs or HDD capacity is below specified
threshold value or HDD being overwritten.
The light turns on to alert you, please check HDD status at the
GUI.
1.5 Rear Panel
The 4-channel series rear panel is shown as below. See Figure 1-2.
Figure 1-2

4
The 8-channel series rear panel is shown as below. See Figure 1-3.
Figure 1-3
Please refer to the following sheet for detailed information.
SN
Icon
Name
Note
1
Power on-off button
Power on/off button.
2
VGA
VGA video output
port
VGA video output port. Output analog video
signal. Can connect to the monitor to view analog
video output.
3
AUDIO IN
Audio input port
Connect to audio input device such as speaker.
4
VIDEO IN
Video input port
Connect to analog camera, video input signal.
5
Power input port
Input 12V DC.
6
USB2.0 port
Connect to USB storage device, mouse, burning
DVD-ROM and etc.
7
A
RS485（RS-485）
communication port
RS485_A port. It is the cable A. You can connect
to the control devices such as speed dome PTZ.
B
RS485_B.It is the cable B. You can connect to the
control devices such as speed dome PTZ.
8
Network port
100M Ethernet port
9
HDMI
High definition
media interface
High definition audio and video signal output port.
It transmits uncompressed high definition video
and multiple-channel data to the HDMI port of the
display device.
10
AUDIO OUT
Audio output port
Connect to video output device such as sound
box.
2Local Login
After system booted up, default video display is in multiple-window mode.
Click Enter or left click mouse, you can see the login interface. See Figure 2.
System consists of two accounts:
Username: ADMIN. Password: 12345 (administrator, local and network)
Username: default. Password: default (hidden user)

5
Note:
For security reason, please modify password after you first login.
Within 30 minutes, three times login failure will result in system alarm and five times login failure
will result in account lock!
Figure 2
3Web
Open IE and input DVR address in the address column. For example, if your DVR IP is
10.10.3.16, then please input http:// 10.10.3.16 in IE address column.
System pops up warning information to ask you whether install webrec.cab control or not. Please
click yes button.
If you can’t download the ActiveX file, please modify your IE security setup.
After installation, the interface is shown as below. See Figure 3.
Please input your user name and password.
Default factory name is ADMIN and password is 12345.
Note: For security reasons, please modify your password after you first login.
Figure 3

6
For detailed operation information, please refer to the User’s Manual included in the resources
CD.
Note
For detailed operation introduction, please refer to our resource CD included in your
package for electronic version of the User’s Manual.
This quick start guide is for reference only. Slight difference may be found in the user
interface.
All the designs and software here are subject to change without prior written notice.
All trademarks and registered trademarks mentioned are the properties of their
respective owners.
If there is any uncertainty or controversy, please refer to the final explanation of us.
Please visit our website or contact your local service engineer for more information.