Panasonic NA-F70HR2 User manual

Fully Automatic Washing Machine
Operating Instructions
Thank you very much for purchasing Panasonic Product.
Before operating this washing machine, please read these instructions completely,
paying special attentions to Safety & General Precautions.
W9901-8BL00
T0212-0
Printed in Thailand
Model No. NA-F70HR2
NA-F70HR2_EN.indd 1 2/28/12 1:25:38 PM

2
Contents
ITEM PAGE
Safety & General Precautions 3-4
Name of parts 5
Procedures before washing 5
Determining load and detergent levels with the Quick Indication 6
Laundry Detergent 6
How to use liquid detergent 7
How to use bleach 7
How to use softener 7
When putting the softener in or removal of the lint filter is difficult. 7
How to use powdered detergent 8
How to use powdered synthetic detergents [Concentrated Type] 8
“Economy’’ Laundering 8
Laundry Tips 8
Operations Panel 9
Miscellaneous
Options
Normal Course 10
Speedy Course 10
Extra Rinse Course 11
Blanket Course 11
Delicate Course 12
Air Dry Program 13
Reserve Program 13
Child Lock program 14
Cancelling end buzzer after washing 14
Choosing Your Own Laundry Setting 15
Maintenance: Tub Hygiene Course 15
Maintenance: Tub Dry 16
Maintenance 16
Please observe the following Instructions 17
Caution 17
How to install 18
Install The Washing Machine Horizontally 18
Connect the water supply hose 19
Drain Hose Installation Instruction 20
Bottom Cover Installation Instruction 20
Troubleshooting 21
Error Indication 22
Specification 22
NA-F70HR2_EN.indd 2 2/28/12 1:25:38 PM

3
Do not place any burning object including
burning candles or cigarettes, on top or
near the washing machine.
There is a danger of fire or set
deformation.
Do not place the washing machine on
a damp place such as in a bathroom or
exposed to the outside weather.
There is risk of the insulation
deteriorating, electric
shock and overheating, or
breakdowns due to rust.
Never disassemble, repair or remodel this
washing machine.
If you disassemble, repair or
remodel the washing machine
by yourself, it can cause fire or
irregular action that results in
injury.
Consult your dealer for repair.
When you are cleaning your washing
machine, do not apply water directly to
any part of the washing machine.
It will cause short circuit and
electric shock.
Safety & General Precautions
To prevent the risk of danger or material loss or damage to the user of others, make
sure to follow the precautions described below.
Make sure to push the power plug
completely into the power supply outlet.
If the power plug is not completely
pushed into the outlet, this may
cause electric shock and fire due
to overheating.
• Never use a damaged power
cord.
Make sure that the ground is attached to
the power supply outlet.
Otherwise, there is a danger of electric shock
at the time of machine trouble or electricity has
leaked.
• Be sure to ask your dealer about
grounding work.
Never touch the laundry with your hand
during spin until the tub has completely
stopped spinning.
If you touch the laundry, even if
the tub is rotating slowly, there is
a danger of injury if the laundry
becomes entangled with your hand.
Pay particular attention to protecting
children from such injury.
Please do not wash or spin laundry which
stained with gasoline, kerosene, benzine,
paint thinner or the likes of it.
There is a risk of
explosion or fire burn.
Do not use power plug socket or wiring
equipment more than their rated capacity.
When you use the socket or wiring more
than its rated capacity by connecting multiple
appliances, it can cause fire due to overheating.
Never disconnect the power plug by
pulling the power cord. Hold the power
plug as you pull it out.
There is a danger of an electric
shock or short circuit which
may cause a fire.
WARNING
May cause a serious injury or death.
CAUTION
May cause physical injury or damage other items.
WARNING
NA-F70HR2_EN.indd 3 2/28/12 1:25:46 PM

4
Do not put your hand or foot under the
washing machine while the washing
machine is operating.
There is a rotating
mechanism at the bottom
of the machine, so you
could be injured.
Do not climb up or put anything heavy on
the top of the washing machine.
You could be injured
due to set deformation
or breakage of the
washing machine.
Do not wash and spin waterproof sheets
and garments.
(Example) Raincoats, outfits
(coats/jackets and pants) for
fishing and skiing, etc.
The items could be damaged
or you could be injured due to
irregular vibration during the
spin cycle.
Always check the hose connection by
turning on the water tap before starting
washing.
If the fixing screws are loose, it will cause water
leakage that could cause unexpected damage.
Do not pull the power plug out
of the socket or push in the
power plug inside the socket
with wet hand.
It will cause electric shock.
Always pull the power plug
out of the power supply before
doing cleaning or maintenance
of the washing machine.
• Otherwise, there is a risk of
electric shock or injury.
Remove any dust which may accumulate
around the power cord.
When dust has accumulated on and around
the power plug, and the dust gets damp or
wet, the insulation plug become defective
and may causes a fire. Pull out the power
plug, and wipe off dampness with a dry
clean laundry.
• If you are not going to use the washing
machine for a long period of time, pull the
power plug out of the socket.
Do not damage the power cord and
power plug.
(Do not damage, modify, immoderately bend,
twist, pull, or bundle the power cord, do not
put the power cord and power plug close to
heating appliances, do not put anything heavy
on power cord and power plug.)
• If using the damaged power cord it will cause
fire and current shortage.
• Consult your dealer about power cord and
power plug repairing.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not use water with temperature above 50°C.
• The plastic parts will become deform, resulting
in set breakdown.
• Do not connect to the hot water supply.
WARNING
CAUTION
NA-F70HR2_EN.indd 4 2/28/12 1:25:52 PM

5
3
2
1
4
5
Procedures before washing
• Check the installation
See pages 18~20 for details.
1 Level the washing machine by adjusting the
adjustable leg and using the leveller as reference.
2 Connect the water supply hose.
3 Turn on the faucet.
4 Plug power cord into socket outlet.
5 Insert the drain hose to drain.
[NOTE]
Before installation, please make sure to install
the bottom cover. See page 20 for details.
Ag Air–Filter is to eliminate
the particulate matter from
the air and make the filter
antibacterial with Ag effect.
(It’s not meant to make
clothes antibacterial directly.)
Name of parts
Bleach / Liquid
Detergent Inlet
Lint Filter A
Leveller
Tub
Feeding Valve
Lid
Pulsator
Power Cord
Power Plug
Operation Panel
Adjustable Leg Drain Hose
Accessories
Water Supply Hose (1)
Length: 1.0 m
Bottom Cover (1)Water Tap Adaptor (1)
Note: Water Tap Adaptor is set
to the Water Supply Hose.
Hose Hole Cover A (1)
Screw (2)
Note: For Bottom Cover
Lint Filter B
Ag Air-Filter
NA-F70HR2_EN.indd 5 2/28/12 1:25:55 PM

6
1Put the laundry into the
machine. 2Allow the machine to churn the laundry for 5 seconds. 3Detergent volume indications.
Press the [Power On/Off] button
and then press the [Start/
Pause] button after putting in
the laundry.
The pulsator operates for about
5 seconds without any water in
the tub to measure the amount
of laundry. If there is already
water in the tub, the machine
will not operate and the water
level will be set to 51L.
The display will indicate the
appropriate water level to the
laundry. Add the appropriate
amount of detergent according
to the detergent volume
indicated.
Determining load and detergent levels with the Quick Indication
Detergent indicator
The indicates the number of scoop of compact powdered laundry detergent formula to be inserted
using the measuring scoop in the tub (1 scoop = about 40 grams).
For information concerning other types of laundry detergent, see the table below.
The pulsator operates without water in the washing tub in order to
measure the amount of laundry.
• According to laundry load, put in the detergent then close the lid.
For better detergent dissolve, put in at the area of water feeding.
Change the water level setting in the following cases:
• When placing the wet laundry inside the tub, the water level will be indicated 51L even though the laundry
weight is light.
• When you put in light weight laundry or laundry that doesn’t absorb water easily (laundry made of synthetic
fiber and mixed fiber, etc.).
Laundry Detergent
Detergent type
Water level
(Laundry
volume)
Synthetic detergents
Powdered
detergent
Concentrated type Liquid type
(25gper 30L of water) (25ml per 30L of water) (40ml per 30L of water)
One measuring scoop
(40g)
Powder
Concentrated
liquid
Non
Concentrated
liquid
Powder
51L
(Approx. 7.0kg)1 1/6scoops approx. 43ml approx. 68ml approx. 68g
41L
(Approx. 3.0kg)5/6scoop approx. 34ml approx. 55ml approx. 55g
33L
(Approx. 2.0kg)4/6scoop
approx. 28ml approx. 44ml approx. 44g
24L
(Approx. 1.2kg)1/2scoop
approx. 20ml approx. 32ml approx. 32g
18L
(Approx. 0.5kg)2/6scoop
approx. 15ml approx. 24ml approx. 24g
16L
(Approx. 0.3kg)1/6scoop
approx. 13ml approx. 21ml approx. 21g
• The figures in parentheses in the water level column indicate the approximate weight of the laundry load.
• Please use the standard amount of laundry detergent as printed on the detergent container.
• Some laundry detergents have their own prescribed methods of use. Please read the instructions to your
laundry detergent.
• When a large quantity of suds is produced, use less detergent or switch to a low-suds detergent.
NA-F70HR2_EN.indd 6 2/28/12 1:26:03 PM

7
How to use liquid detergent
Put in the liquid detergent according to the water level
into the bleach / liquid detergent inlet.
Bleach / Liquid Detergent Inlet
[NOTE]
•Liquid detergent, like powdered
detergent is not easily dissolved
and can leave scum along the
inside of the washing tub, so be
sure to rinse thoroughly.
■Liquid bleach
•Dilute fully with water and pour in before
pressing [Start/Pause].
■Powder bleach
• Place directly into the tub during fill.
•Follow the instruction on the
bleach container.
Bleach / Liquid Detergent inlet
Cassette case
Balancer case
Softener Inlet
How to use bleach
Adding softener
Please put it in before beginning the wash.
• Because the (Concentrated) type is sticky and adheres to the
opening, dilute with 3 times the amount of water.
• Do not use softener which is solidified or separated from liquid.
(To avoid softener or water from remaining in the softener
compartment.)
• Pour it in slowly. When it is difficult to add, turn the wash tub
to the right to locate the Softener Inlet in a more convenient
position (see the following clause for details), or release the
cassette case from the Balancer case and pour into it.
• Cassette case can be removed by pulling the top toward inside.
How to use softener
[Please note]
• Please do not let the softener sit in the water for a long time.
• Please do not open the lid during the spin cycle. If the lid is opened, softener will be added too early
and then its effectiveness will decrease.
• If rinsed water is used, results will not be as effective.
• Softener is automatically added to the tub at the end of the rinse cycle.
When putting the softener in or removal of the lint filter is difficult.
The wash tub can be turned lightly to a convenient position.
•How to turn the wash tub.
1. Push the power switch on.
2. After 15 seconds with a sound “click”, rotate
the wash tub.
[NOTE]
•The wash tub does not rotate while filled with
water.
• The wash tub does not rotate after pushing
the [Start/Pause] button.
• The water filled after 15 seconds is drained
automatically.
Table of softener quantities
(Normal) ..............20 ml softener per 30L of water. (Concentrated) ... 6.6 ml softener per 30L of water.
Water level 51L 41L 33L 24L 18L 16L
Softener
Normal Approx. 34ml Approx. 27ml Approx. 22ml Approx. 16ml Approx. 12ml Approx. 11ml
Concentrated Approx. 11ml Approx. 9ml Approx. 7ml Approx. 5ml Approx. 4ml Approx. 4ml
NA-F70HR2_EN.indd 7 2/28/12 1:26:07 PM

8
“Economy’’ Laundering
Using wash water twice
Wash lightly soiled laundry in the first load.
Wash heavily soiled laundry in
the second load.
1. Put the laundry in the tub, and press [Power On/Off]
button.
2. Press [Process] button for [Wash] and press
[Start/Pause] button.
3. Put in the detergent.
4. Wash finishes.
✻Take the wet laundry out.
5. Load the laundry.
6. Press [Power On/Off] button to carry out
washing, rinsing and spinning. Add the
detergent a little when you increase the
water level or refilling water.
7. Wash finishes.
✻ Remove the laundry.
8. Put wet laundry which has been washed back into
the tub again.
9. Press [Process] button for [Rinse] and [Spin], then
press [Start/Pause] button.
10. Close the lid and wait until laundry will be completed.
➜
➜
Laundry Tips
Brush off laundry before washing
them.
Turn inside out any garments which
give off lint or lint balls.
Press down lightly on
bulky items while the tub
is filling with water to get
them thoroughly soaked.
Put a little detergent on a brush and
lightly scrub the tough stains off
collars and cuffs.
Put laundry with lace attached,
lingerie, nylon stockings, chemical
fiber transparent fabrics etc. in a
washing net.
For laundry which has long cord or
clasps attached, tie the cords on
aprons, pillow covers and the like,
and fasten clasps.
POWDERED SYNTHETIC DETERGENT
[CONCENTRATED TYPE]
Color transfer and color fading will occur if the detergent directly in
contact with the laundry (for a long time) such as when using Soak
program or soak the clothes. Please use white handkerchief, etc.
to wrap the detergent before put it into the tub.
How to use powdered synthetic detergents [Concentrated Type]
How to dissolve
1. Fill the washing machine tub with water one level below the water level that will be used.
(For low water level setting, the same water level will be used.)
2. Add the powdered detergent and let the machine run for about 3 minutes.
3. Put the laundry in and begin washing at the desired level. Set the [Water Level] button.
Dissolving hard-to-dissolve detergent
1. Pour 5 liters of water at about 30°C into a container.
2. Dissolve the detergent by adding it little by little while churning the water.
•
In order to keep it from hardening or sticking, mix it well and dissolve it, then pour it into the washing tub.
[Warning]
• Powdered detergent is not easily dissolved compared to synthetic detergent, be certain to rinse
thoroughly. If it is not rinsed well laundry may be tinged with yellow or smell of detergent. If too much
detergent is added, or if it is added directly to cold water, scum and clumps which are not completely
dissolved will stick to the inside of the tub and hose. These may float up and dirty the laundry.
How to use powdered detergent
NA-F70HR2_EN.indd 8 2/28/12 1:26:10 PM

9
Operations Panel
Reserve
• Press the [Reserve]
button to set how many hours later you would like the wash to be completed.
See page 13 for details.
On/Off
• The power automatically turns off when total
operations is finished.
• The power automatically turns off if [Start/
Pause] button is not pressed within 10 minutes after turning on the power.
Water Level
• The appropriate Water Level for the size
and type of your own laundry will be displayed.
• You can adjust the Water Level according to your desired level.
Program
• According to type of laundry and
stain, you can select suitable course yourself.
Caution: If you need to change the [Program] settings after the cycle has already started,
turn the power Off and On it back.
[Water Level • Time] display
•
When the machine is in operation, the time display shows how much time (in minutes) is left and water level.
•
When the programmable timer has been set, this display shows how much time is left until the wash is finished by pressing the [Reserve] button.
• Timer indication on the panel will show longer
time than selected time as it includes water feeding, draining, etc.
•
When pressing [Water Level] button, the number of Water Level such as “16, 18, ...” will be displayed.
Start/Pause
• Press this to start. • Press this to stop in the middle
of the cycle.
Process
• Press to select Wash only, Wash and
Rinse or other individual functions.
• To Perform the
air dry. (p.13)
NA-F70HR2_EN.indd 9 2/28/12 1:26:12 PM

10
Normal Course
Suitable for Normal washing of casual laundry.
1 Press the [Power On/Off] button and put in the laundry.
2 Press the [Start/Pause] button.
After pressing the [Start/Pause] button, the machine starts
“Laundry sensing”. When it is completed, the display indicates
the water level with “L” and in a few seconds the remaining
time with “min” will be indicated. To check the water level,
press the [Water Level] button.
• The light will indicate “Normal’’ Course automatically.
• The machine will measure the load size without
water (laundry sensing).
Z
• The water level will be indicated automatically.
• You can adjust the water level according to your
desired level.
3Put in the appropriate amount of
detergent for the water level.
Then close the lid.
 Add softener. See page 7 for details.
• Different brands of detergent may have different
measuring scoops sizes. If the scoop holds other
than 40 grams, add the amount of detergent
recommended by the detergent makers for the
selected water level. See page 6 for details.
The buzzer lets you know when the washing is finished.
1
2
Speedy Course
Suitable for washing lightly soiled laundry or quick wash.
1 Press the [Power On/Off] button and put in the laundry.
2 Press the [Program] button once for
selecting “Speedy” Course.
• The light will indicate “Speedy” Course.
3 Press the [Start/Pause] button.
After pressing the [Start/Pause] button, the machine starts
“Laundry sensing”. When it is completed, the display indicates
the water level with “L” and in a few seconds the remaining
time with “min” will be indicated. To check the water level,
press the [Water Level] button.
• The machine will measure the load size without
water (laundry sensing).
Z
• The water level will be indicated automatically.
• You can adjust the water level according to your
desired level.
4 Put in the appropriate amount of
detergent for the water level.
Then close the lid.
 Add softener. See page 7 for details.
• Different brands of detergent may have different
measuring scoops sizes. If the scoop holds other
than 40 grams, add the amount of detergent
recommended by the detergent makers for the
selected water level. See page 6 for details.
The buzzer lets you know when the washing is finished.
1
3
2
NA-F70HR2_EN.indd 10 2/28/12 1:26:14 PM

11
1
3
2
1
3
2
Extra Rinse Course
For washing with extra rinse cycle, suitable for baby or people with sensitive skin.
1 Press the [Power On/Off] button and put in the laundry.
2 Press the [Program] button 2 times for
selecting “Extra Rinse” Course.
• The light will indicate “Extra Rinse” Course.
3Press the [Start/Pause] button.
After pressing the [Start/Pause] button, the machine starts
“Laundry sensing”. When it is completed, the display indicates
the water level with “L” and in a few seconds the remaining
time with “min” will be indicated. To check the water level,
press the [Water Level] button.
• The machine will measure the load size without
water (laundry sensing).
Z
• The water level will be indicated automatically.
• You can adjust the water level according to your
desired level.
4Put in the appropriate amount of
detergent for the water level.
Then close the lid.
 Add softener. See page 7 for details.
• Different brands of detergent may have different
measuring scoops sizes. If the scoop holds other
than 40 grams, add the amount of detergent
recommended by the detergent makers for the
selected water level. See page 6 for details.
The buzzer lets you know when the washing is finished.
Blanket Course
Suitable for slow and gentle washing such as Blanket, using high water level.
1 Press the [Power On/Off] button and put
in the laundry.
• Fold the Blanket or put into the laundry net as
recommended in page 12.
2 Press the [Program] button 3 times for
selecting “Blanket” Course.
• The light will indicate “Blanket” Course.
3Press the [Start/Pause] button. • The water level will be indicated automatically at
high level 51L.
4Put in the appropriate amount of Liquid
detergent for the water level.
Then close the lid.
 Add softener. See page 7 for details.
• See page 6 for details.
The buzzer lets you know when the washing is finished.
NA-F70HR2_EN.indd 11 2/28/12 1:26:16 PM

12
Delicate Course
Suitable for washing soft laundry.
Remark: Amount of laundry that can be washed at one time : 3.5 kg
1 Press the [Power On/Off] button and put in the laundry.
2 Press the [Program] button 4 times for
selecting “Delicate” Course.
• The light will indicate “Delicate’’ Course.
3 Press the [Start/Pause] button. • Water level will be indicated 41L automatically.
• Selection for water level only at 41L and 33L.
4 Put in the appropriate amount of
detergent for the water level.
Then close the lid.
 Add softener. See page 7 for details.
• Different brands of detergent may have different
measuring scoops sizes. If the scoop holds other
than 40 grams, add the amount of detergent
recommended by the detergent makers for the
selected water level. See page 6 for details.
The buzzer lets you know when the washing is finished.
Washable Blanket
Blanket which are made of 100% synthetic fiber or 100% cotton with care symbol.
(Weight per blanket is 4.2kgor less)
Net can be bought in the market from authorized dealer. (AXW22I-8200)
Prepare Before Washing Blanket
1. How to fold blanket:
Fold the blanket in half in the
lengthwise direction.




Fold the blanket again, in thirds,
in the same direction.
230 cm
5 cm
180 cm
180 cm
2. Put the blanket into
the laundry net.
 Roll up the blanket as illustrated.




Put the hem part of blanket into
net first, so the hem part is at
the bottom of the net, and close
the fastener.
3. Put the appropriate
amount of detergent
into the tub.
4. Put the prepared
blanket into the tub.
1
3
2
NA-F70HR2_EN.indd 12 2/28/12 1:26:20 PM

13
Reserve Program
You can select the finishing of the washing course between 2 to 24 hours from the current time.
(Sometimes the operation exceeding the Reserve time because of the water feeding and draining
condition.) [Reserve] program only can use for Normal, Speedy and Extra Rinse Course.
3
1 Press the [Power On/Off] button and put in the laundry.
2 Choose the [Program] that suit to your laundry type.
3 Press the [Reserve] button and select between 2 to 24 hours.
4 Press the [Start/Pause] button. • The machine will measure the load size without
water (laundry sensing).
Z
• The water level will be indicated automatically.
5 Put in the appropriate amount of
detergent for the water level.
Then close the lid.





 Add softener. See page 7 for details.
• The water level indication will go off 5 seconds after
starting the program, but only indicate the end time
of the selected [Reserve] 2 to 24 hours after current
time, which will go off after 2 minutes .
Check the recommended detergent amount before
the indication goes off.
• To check the contents of the Reserve operation,
keep pressing [Reserve] or [Program] or [Process]
button for the time and the course, and [Water Level]
button for the water level and the course.
(The indication will go off after 5 seconds even if you
keep pressing the button.)
The buzzer lets you know when the washing is finished.
Air Dry Program
The air dry is the process to provide air flow utilizing the rotation of the tub and dry the laundry
with this air flow. (Agitation is performed about every 30 minutes to untangle the laundry.)
Remark: • The laundry may not be dry enough depending on the size of the load, type of clothes,
temperature, humidity and installation conditions of the washing machine. (As no heater is
used for this function, some users may feel the laundry is cold and not dry.)
• Clothes for which the Air Dry function may be used - synthetic clothes (2.0kg).
1 Untangle the spun laundry and place them in the tub. Securely close the lid, and
then, press the [Power On/Off] button.
2
Select the Air Dry time by pressing the [Air Dry] button once for 30 min, twice for 60 min
and three times for 90 min.
3 Press the [Start/Pause] button. • The air dry operation is a timer-controlled
program and it completes regardless of how
dry the laundry is. If the laundry is not dry
enough, perform the air dry operation one
more time.
• The remaining time appears on the display.
The buzzer lets you know when the program is finished.
1
4
2
1
3
2
NA-F70HR2_EN.indd 13 2/28/12 1:26:22 PM

14
2. Press
1. While pressing
2. Press the [Program]
button for at least 5 seconds.
1. Press the [Power On/Off] button.
Cancelling end buzzer after washing
1. Press [Start/Pause] button and [Power On/Off] button at the same time, release [Power On/Off] button
and hold [Start/Pause] button at least for 3 seconds. Two times beep sound indicates the end buzzer of
washing has been cancelled.
•Repeat step 1 to activate the end buzzer. Four times beep sound indicates the end buzzer has been
activated.
•When the power cord is unplugged or a power outage occurs, the last setting of the end buzzer will be
remained.
Child Lock program
This is an emergency alarming mode with a continuous buzzer sounds when child open the lid
during operation to prevent a child from drowning (condition where there is a water inside the tub)
by falling into the tub which contains water.
Close the lid to stop the buzzer. If the lid is kept open for more than 10 seconds, the machine will
force drain the water inside the tub assuming that the child had fallen into the tub but make sure
that the drain hose is laid down.
•This is different from the function that lock button operation and the lid.
IN THE CASE OF FORCE DRAINING.
There will be an abnormal alarm (flickering of lamps and buzzer).
Please check inside the tub.
RESET METHOD OF ABNORMAL ALARM.
Button operation cannot be used.
At first, unplug the power cord from the outlet and re-plug it again after 5 seconds.
Please repeat the operation from the beginning because the process had been cancelled.
Please do not leave water inside the tub as [Child Lock] mode does not function in
the following case:
•In the case of power supply off.
•In the case when forget to lay down the drain hose.
•Please close the lid immediately after press the [Start/Pause] button because when the lid is open, there
will be an abnormal alarm and force drain during water feeding.
SETTING METHOD
1. Press the [Power On/Off] button.
2. Press the [Program] button for at least 5 seconds.
The buzzer sounds (two times for setting) and the [Child Lock] indication turns on.
Remark:
CL will be indicated on time display only 2 seconds and then it will be turn off.
CANCELLING METHOD
Repeat the operation 1 and 2.
The buzzer sounds (4 times for cancelling) and the [Child Lock] indication turns off.
[NOTE]
When you press [Program] button, it switches over, from “Normal” to “Speedy”, for example.
To set it back to “Normal”, turn off the power and turn it on again.
NA-F70HR2_EN.indd 14 2/28/12 1:26:24 PM

15
Choosing Your Own Laundry Setting
You can select PROGRAM to wash your own laundry according to your preferences.
1
3
2
This is the course to prevent fungus growth at the washing and spinning tub using the “Chlorine system
bleach for clothing use”, available in most markets, to keep the tub clean.
-Do not use the oxygen system bleach or chlorine
system bleach for kitchen use.
(Too much lather may overflow.)
• Frequency for care : Once a month
• Operation will be continued for 2 and a half hours.
1Press the [Power On/Off] button.
2Press the [Program] button 5 times for
selecting “Tub Hygiene” Course.
• The [Tub Hygiene] light will be indicated.
3Press the [Start/Pause] button.
4When filled up with water, press the [Start/Pause] button, and pour about a cup of
chlorine system bleach for clothing use directly into the washing and spinning tub.
(Approx. 200ml per 50L of water.)
5Close the lid, and press the
[Start/Pause] button.
- Do not operate while clothing is in the washing tub.
-Cancel the “Child Lock” when it is active. Refer to
page 14.
Operation will be finished in 2 and a half hours.
[NOTE]
• Fungus growth at the washing and
spinning tub varies depending on
ambient conditions.
WASH To reuse the wash water.
• After washing, the wash water is left in the tub and the machine stop operation.
SPIN To spin the separately washed laundry.
• If the water is left in the tub, it will drain before spinning.
• If the lid is opened, it will only drain without spin.
WASH
RINSE
To reuse the rinse water.
• After washing and rinsing, the rinse water is left in the tub and the machine stop operation.
WASH
SPIN
To wash with water (without detergent).
• The machine will spin automatically without rinsing after washing.
RINSE
SPIN
To rinse and spin the laundry soaked with detergent.
•
If the water is left in the tub, it will drain and followed by the intermediate spin before start of rinsing.
• In the case, when [Spin] or [Rinse] [Spin] is selected, if there is water in the tub, the machine will start from draining and if
there is no water in the tub, it will start from spinning. So it will take a little while before the machine start operating.
• IN THE CASE WHEN [Child Lock] MODE IS SET.
In some cases, if the lid is opened when the tub contains water, the machine will start force draining. In this case, cancel
the [Child Lock] mode.
Maintenance
To prevent fungus growth at the washing and spinning tub.
“Tub Hygiene” Course
NA-F70HR2_EN.indd 15 2/28/12 1:26:26 PM

16
Lint filter • Remove the accumulated lint regularly. When the filter is full of lint, the filter could
be torn from rubbing with the laundry during washing cycles.
1(Lint filter A)
Remove the lint filter A. 23(Lint filter A) Put the filter back in.
Make sure it clicks into
place.
1(Lint filter B)
Pull out the lint filter B
from the lock.
By using fingers to
press and pull out at
the upper part of the lint filter’s side.
Remove the lint
from the filter.
3(Lint filter B)
Set it back to the
original position.
• Insert the bottom
first as shown in the figure.
• Press down and lock as the arrow.
• When the filter is torn, etc., obtain another one from the place of purchase.
• Turn the wash tub if the filter cannot be removed easily.
Maintenance
To prevent from fungus growth at the outer tub area.
“Tub Dry”
Maintenance
Water supply hose filter / Ag Air-Filter / Lint filter / Main unit and tub
1. Turn off the water faucet.
2. Press the [Power On/Off] button.
3. Press the [Start/Pause] button.
The Water Level will light up a few seconds later.
4. Press the [Power On/Off] button to turn off the power.
5. Loosen the nut.
6. Take off the hose.
7. Clean the filter.
Water supply hose filter
• When water supply seems constricted.
• Be absolutely sure to follow
the procedures as described,
otherwise water will spray out.
• Upper part of the tub
Wipe with a damp cloth.
✻Do not apply water directly.
The floor could get wet.
Main unit and tub
• Main unit
Wipe with a soft cloth. Use a neutral dishwashing liquid or soap for stubborn
places.
✻Do not apply water directly.
✻Do not use cleanser, paint benzine, alcohol, kerosene, etc.
✻Follow any instructions that come with a chemically treated cloth.
Remark: Please be informed do not put laundry inside the tub during this program.
1Press the [Power On/Off] button.
2Press the [Program] button 5 times
for selecting “Tub Hygiene” Course.
• The [Tub Hygiene] light will be indicated.
3Press the [Process] button once for selecting only “Spin”.
4Press the [Start/Pause] button. • Spinning operation will be operated for 30 minutes
The buzzer lets you know when the washing is finished.
1
4
2
3
Ag Air-Filter
✻ Do not wash
with water.
1Remove the filter cover, then
pull out the Ag Air-Filter. 2Remove any kind of dust from the filter.



3Set it back to the original position
by pressing the left /right sides of
the filter cover.
✻Do not press the middle of the
filter cover.
NA-F70HR2_EN.indd 16 2/28/12 1:26:31 PM

17
Please observe the following Instructions
shut off
After finishing don’t forget:-
• Please shut off the
faucet.
• Please don’t let water
store for a long time.
-This is to prevent water
soaking.
Do not put any type of charger stand
on the washing machine.
• When you place the
charger stand for an
electric toothbrush, etc.,
close to the washing
machine, malfunction
will result.
When you will not use the washing
machine for a long period of time.
• Turn off the power and pull out the
power plug.
Do not use a cover made of vinyl chloride.
(It could damage the plastic or paint.)
• If you intend to use such a
cover, first place a cloth over
the washing machine to keep
it from coming in contact with
the cover.
Do not put in too much detergent.
• Rinsing cannot be
done sufficiently.
• The floor could be wet
by the foam flowing
out of the machine.
Keep condensation from getting on the
floor.
• When the air temperature is
high and the water temperature
is low, condensation will
sometimes run off onto the
floor.
Do not put too much laundry.
• Put laundry completely
into the tub. Never
allow the laundry to
protrude out of the tub.
(This causes torn
laundry or damage to
the plastic parts.)
Do not hold magnets or cards with
magnetic strips near the washing
machine.
• Do not hold cards with magnetic strips near
the washing machine. (The cards may become
unusable.)
• Do not hold a magnet near
the washing machine while it
is in operation.
(The tub may stop spinning.)
If the spinner tub does not stop within
15 seconds after you open the lid
during spinning, immediately stop
using the machine, and contact your
dealer for repair.
Do not spray anything or pour water
over the lid.
• Do not put water, pesticides,
hair products, deodorants, or
any other such liquids on the
lid. (To avoid electric shock and
malfunctions)
Caution
1. It is advisable not to start the machine direct with spinning process but
to start with Normal washing cycle.
2. Please be aware, when the laundry is unbalanced during spinning,
some knocking sound may occur and the spin may stop followed by an
additional automatic rinsing.
3. If the unbalance condition continue for 3 times, the washing machine
will stop functioning automatically.
4. You can manually distribute the laundry evenly to ensure the laundry
are balanced inside the tub.
Cautions on parts
If the supply power cord is damaged. It must be replaced by Service Center or a similarly qualified person in
order to avoid a hazard.
Even LaundryUneven Laundry
NA-F70HR2_EN.indd 17 2/28/12 1:26:36 PM

18
How to install
Placement
Socket outlet
Establish a ground (In case of two-wire power cords)
• When there is a grounding receptacle on power supply
outlet.
• When carbon ground rod (sold separately) is used.
• Do not connect to gas pipe, water pipe, or ground wire
of telephone or lighting rod.
• Reestablish a ground when you change installation
location or move.
• For further information, contact the distributor or service
technician.
Grounding
receptacle Ground
wire
Carbon
ground
• Do not install the washing machine in any extremely damp place such as a bathroom, or in a place exposed
to the weather. There is a danger of electric shock, fire, machine trouble and deformation of machine.
• If machine is installed on the floor, be sure that carpet does not block any openings to prevent it from
closing any ventilation openings.
• Do not install the washing machine exposed to direct sunlight (This could cause machine trouble,
deformation and other problem.)
Install The Washing Machine Horizontally
1Place the washing machine on a flat and secure location.
2Open the lid, leveller is already fix on the Plastic Body surface. Visually check
that the bubble of the leveller is inside the mark from the front and top.
• There is no need
to make a height
adjustment.
Plastic Body Leveller
3Adjust height
When the bubble is largely out of mark
When the bubble is a little out of mark
(Bottom view)
Front side
Adjust using
adjustable leg
4Check the machine for unsteadiness and tightens the adjustable leg knob.
1. Turn the Adjustable Leg Knob towards
(LOOSEN) direction to loose it.
2. Turn the Adjustable Leg to adjust the
levelness.
• When increasing height, turn Adjustable
Leg towards (LOOSEN) direction.
• When decreasing height, turn Adjustable
Leg towards (TIGHTEN) direction.
3. Turn the Adjustable Leg knob towards
(TIGHTEN) direction to tighten it.
Tighten
Adjustable leg knob
Loosen
Adjustable leg
To raise To lower
Bubble
Mark
When the bubble is inside the mark
Power cord
• Make sure to push the power plug completely into the socket outlet. If the power plug is not
completely pushed into the outlet, this will cause electric shock and fire due to overheating.
• The floor is largely inclined against the
direction that the bubble is leaning.
• Let the bubble inside the mark by
placing a board under the leg on
the other side.
Board or a like
In the event that the installation, test run and inspection of the washing machine are not carried out following the
installation method outlined in this manual, the manufacturer will not be liable for any accident or damage caused.
Make sure to establish a ground.
There is a risk of electric shock
caused by a leakage of electricity.
WARNING
NA-F70HR2_EN.indd 18 2/28/12 1:26:41 PM

19


Connect the water supply hose
The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused.
1.
Loosen the 4 screws on the water tap adaptor just enough to slip the adaptor over the mouth of the faucet.
2. Slip the water tap adaptor over the faucet, keeping it in a straight line with the faucet. Tighten the screws,
applying even pressure all around. When the space behind washing machine is narrow due to a wall or
other obstacle, adjust the back screw to the proper position before slipping the connector over the faucet.
3. Remove the tape and tighten B by turning it to the right.
4. With the water supply hose cover and lever pushed down, slide the hose up onto the proper position
release them before hear it click into place.
5. Pull down on the hose to make sure it will not come off.
6. Turn on the water faucet to check for leaks.
[Note]
• Firmly tighten part B of the water tap adaptor,
otherwise water leakage will result.
•
If a water tap adaptor is already connected,
replace with the attached new one.
• When the hose must be reinstalled (after you
remove, for example), turn B to the left until
about 4 mm of the thread becomes visible, then
carry out the procedure described above.
Screws (4)
Water tap
adaptor
Lever
Water faucet
Water supply
hose cover
Approx. 4 mm
Connect the water supply hose to the
water supply valve screw.
1. Push the water supply hose nut straights onto
the water supply valve screw.
2.
Hold the elbow by lifting it up, screw the nut onto the
water supply valve screw, and firmly tighten the nut.
3. After the nut is tightened, check whether or not
the elbow is unsteady or loose.
4. After tightening, open the faucet to confirm that
there is no water leakage.
[Cautions]
• Firmly tighten the nut, otherwise water leakage
will result.
• Water Pressure Rating :
2.9 x 104– 9.8 x 105Pa
Elbow
Water
Supply Hose
Drain hose
Hose extension
If extended external part is necessary when connecting the drain hose, the length of the drain hose should
be less than 3 m and the height should be below 10 cm.
Do not put hose tip under the
water
Over 10 cm
Below 10 cm.
3 m max.
Good Example
Install the machine 10 cm or more away from the wall.

Nut
Water supply valve screw
NA-F70HR2_EN.indd 19 2/28/12 1:26:45 PM

20
Hose Hole Cover A Bottom Cover
Base
Convex Part
A.Purpose
For safety precaution.
B.How to install Bottom Cover to the Base
Cover (about 1/3 from the bottom) and slightly
bend the upper part toward you so that the
convex part on both sides don’t touch the back
of the body. Then slide it down completely.
4. Securely fasten the 2 screws of the Bottom
Cover to the Base.
1. Lay down the washing machine with the back
body facing to the upside.
2. Adjust the Hose Hole Cover A (accessory) to the
slot at the base.
3. Fix Bottom Cover (accessory) where surface with
UP indication is facing to the washing machine.
And slide down the bottom tip of the Bottom
Bottom Cover Installation Instruction
Drain Hose Installation Instruction (The drain hose is installed inside the bottom of the base.)
1. Lay down the washing machine with the back
body facing to the upside.
Drain Hose
Rear
Tape
To change the drain hose to opposite. (Ex. Changing hose position from right to left.)
1. Lay down the washing machine with the back
body facing to the upside.
2. Remove the screw fixing the hose holder.
3. Remove the hose holder from the base.
Screw
Hose Holder
4. Move the hose holder to opposite side.
Then insert the hose holder to left hose outlet
position of the base.
Front
Caution
Make sure the hose holder is fixed on the base properly
to avoid water leaking caused of the hose damaged.
Note
Make sure to remount the bottom cover after pulling out
the drain hose or changing its position.
Note
Do not remove the hose
holder from the drain hose.
Spread a mat such as cardboard under the body to avoid scratches.
Base
Drain Hose Pull out.
2. Peel off the tape and pull out the drain hose
from the base.
5. Fix the hose holder with screw properly.
Note
Make sure the drain hose
is not twisted.
NA-F70HR2_EN.indd 20 2/28/12 1:26:52 PM