Panasonic NA-F80VG8 Product guide

Model No. NA-F80VG8
W9901-9SB10
A0715-2046(V)
Printed in Vietnam
04/2016
Contents
Safety Precautions 2
Part Names 3
Operation Panel 4
Variety of Programs 5
Detergent 6
Washing 7
Washing Options 8
• GIẶT NHẸ (Delicate)
• CHĂN MÀN (Blanket)
• SẤY BẰNG GIÓ 90’ (Air Dry)
• Wash / Rinse / Spin
Convenient Functions 10
Maintenance 10
Installation 12
Troubleshooting 14
Error Display 15
Specications 16
Thank you for purchasing this
product.
- Read these instructions carefully
for optimum performance and
safety before use.
- Keep this manual for future
reference.
Operating & Installation
Instructions
Fully Automatic Washing Machine
(Domestic use)

2
Safety Precautions
May cause serious
injury or death.
Never do the following about the
power plug and cord
(To prevent re or electric shock)
● Do not plug in or unplug the power cord with
wet hands.
● Do not hold or pull on the cord when
removing the plug from the socket.
● Do not use a power cord or plug that is
damaged. If the power cord is damaged, it
must be replaced by the manufacturer, its
service agent or similarly qualied persons in
order to avoid a hazard.
Observe the following about the
power plug and cord
(To prevent re or electric shock)
● Use a socket that satises the rating
requirement solely for this appliance. Do not
use a plug adaptor or extension cord.
● Always fully insert the power plug into the
socket.
● Wipe the power plug periodically with a dry
cloth. (Accumulated dust collects moisture,
which may cause insulation failure, resulting
in re.)
● Unplug the power cord before cleaning.
Never disassemble, repair or modify
the appliance yourself.
● In case of malfunction or failure, immediately
stop use, unplug the power cord, and ask
your nearest service centre for repair.
Do not allow children to use on their
own.
● This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
● Children should be supervised to ensure that
they do not play with the appliance.
Keep away from re.
Do not put ammable materials or
clothes with such things attached in
the tub. Keep them away from the
appliance.
(To prevent explosion or re)
● For example: Kerosene, gasoline, benzine/
thinner, alcohol, etc.
Do not touch the tub until it
completely stops.
(To prevent injury)
● If the tub does not stop within 15 seconds
when the lid is opened during spin process,
switch off the appliance immediately and call
a service person.
Provide a ground.
(To prevent electric shock by short circuit)
● Ask a service person to do the grounding
work.
● In case of a 2-pin power cord, establish a
ground.
Keep magnets and magnetized
objects away from the operation
panel.
The tub may rotate even when the lid is open,
resulting in injury.
Read and follow these safety precautions.
WARNING

Safety Precautions Part Names
3
Part Names
May cause injury or
property damage.
Do not wash, rinse, or spin
waterproof sheets or clothes.
(To prevent injury, damage to the main unit,
walls, oor or laundry, or water leakage if the
appliance falls over or oscillates extremely while
spinning)
● Raincoats, wet suits, etc.
Observe the following
● Locate away from direct sunlight or heat.
(To prevent malfunction or deformation)
● New hose-sets supplied with the appliance
are to be used and old hose-sets should not
be reused.
● Be careful not to get your ngers caught
when opening and closing the lid.
● Do not insert your hands or feet under the
main unit.
(To prevent injury by rotating parts)
● Do not climb or put heavy objects on the
appliance.
(To prevent deformation and breakage
resulting in injury)
● If the lid is broken, immediately stop using the
appliance.
(To prevent deformation and breakage
resulting in injury)
● Do not connect to the hot water supply.
● Do not directly pour hot water of 50 ºC or
higher into the tub.
● Do not obstruct the openings of the bottom
face with carpet, etc.
Turn off the water faucet after
operation.
(To prevent water leakage)
This appliance is only suitable for
textiles labelled washing machine
washable.
External drain
water hose
(P. 12)
Pulsator
Lint lter
(P. 10) Water supply valve
(P. 13)
Lid
Operation
Panel (P. 4) Softener
inlet
(P. 6)
Power cord
and plug
(P. 13)
Bleach inlet
(P. 6)
Detergent case
(P. 6)
Adjustable leg
(P. 13)
Tub
Accessories
●Water
supply
hose (1)
●Water tap
adaptor (1) ● External drain water
hose (1)
● Bottom cover (1) ● Screw (1)
For the bottom cover
CAUTION

4
Operation Panel
Program selection
(P. 5)
Wash/Rinse/Spin (P. 9)
Start/Pause
Water level/
detergent volume
The detergent volume guideline
corresponding to the water level
indication is shown below.
(: 1 scoop of detergent)
Detergent volume
Water level
Child Lock lamp (P. 10)
Water level/
remaining time
Indicates the selected program (No.)
After starting operation, indicates
the water level according to the
amount of laundry.
After approx. 5 seconds, indicates the
approximate remaining time (min).
TỰ KHỞI ĐỘNG LẠI
(Auto Restart) lamp
In case of a power
failure during operation,
operation will resume
from the point where it
was stopped when the
power is recovered.
The lamp lights up when
the operation resumes.
Change water level
During the wash process, press
“Water Level” to change the
water level.
● Some water levels cannot be
selected depending on the
program.
● When the remaining time is
displayed, press “Water Level”
to check the water level.
Preset
Set the time to nish washing (in hours).
e.g.) 8 hours later
● Setting range: 2 - 24 hours later, in
one-hour increments.
(3 - 24 hours later for the
6
GIẶT NGÂM
(Soak) program, 1 - 24 hours later for the
2
GIẶT NHANH (Speedy) program)
●Not available for the following programs:
3 GIẶT NHẸ (Delicate)
4 GIẶT NGÂM NƯỚC XẢ (Fragrance)
5 CHĂN MÀN (Blanket)
8 SẤY BẰNG GIÓ 90' (Air Dry)
9 VỆ SINH LỒNG GIẶT (Tub Hygiene)
●Check where to put in liquid detergent.
(P. 6)
ECONAVI lamp
(P. 8)
Power On/Off
The power turns
off automatically if
you do not press
“Start”/“Pause”
within 10 minutes
after power-on.

Operation Panel Variety of Programs
5
Variety of Programs
Laundry preparation and check
Wash separately
●Clothes losing color easily
●Lint producers1) from lint
collectors2)
1) Lint producers: towel,
sweater, etc.
2) Lint collectors: polyester
pants, eece jacket, etc.
Pre-laundry check
To prevent damage to clothes,
malfunction and drainage failure
●Remove coins, pins, paper clips, nails, etc.
●Fasten buttons and close zippers.
●Do not wash items (such as
paper diapers) other than laundry.
● Reverse clothes with surface
likely to ake off.
● Use a brush to remove pet and
human hair, sand, etc.
● Tie strings, etc.
For delicate underwear only
Use laundry nets
● Underwire brassieres
●Lacy clothes, lingerie and stockings
When using a net
● Do not overpack.
●Put the zipper's slider into the cover.
(To prevent damage to clothes
and the main unit)
● Do not use the 8 SẤY BẰNG
GIÓ 90' (Air Dry) program.
(To prevent uneven drying and wrinkles)
Purpose Program Maximum
capacity
Everyday
clothes Daily washing 1GIẶT THƯỜNG
(Normal) (P. 7)
8.0 kg
Speedy washing
for light soil 2GIẶT NHANH
(Speedy) (P. 7)
8.0 kg
Delicates
Washing
delicates gently
3GIẶT NHẸ
(Delicate) (P. 8)
4.2 kg
Clothes for babies &
people with sensitive skin
Rinsing
thoroughly Baby-care (P. 7)
8.0 kg
Using extra
softener Stronger scent 4GIẶT NGÂM NƯỚC
XẢ (Fragrance) (P. 7)
8.0 kg
Blankets 5 CHĂN MÀN
(Blanket) (P. 8)
4.2 kg
Heavily soiled
clothes
Presoaking to
wash 6GIẶT NGÂM
(Soak) (P. 7)
8.0 kg
Saving water
*To rinse thoroughly, use the 1 GIẶT
THƯỜNG (Normal) or Baby-care program. 7 TIẾT KIỆM NƯỚC
(Water Save) (P. 7)
8.0 kg
Preventing black
mould and smell
Tub drying 8SẤY BẰNG GIÓ 90'
(Air Dry) (P. 9) ―
Tub cleaning 9VỆ SINH LỒNG GIẶT
(Tub Hygiene) (P. 11)
Drying synthetic bre clothes 8SẤY BẰNG GIÓ 90'
(Air Dry) (P. 9) 2.0 kg

6
Detergent
Putting in detergent
Do not put detergent directly into the tub.
Detergent may remain undissolved.
● The level of foaming depends on conditions
such as load size, degree of soiling, detergent
type, and water hardness.
Putting in bleach
● Do not use chlorine bleach for coloured
clothes to prevent loss of colour.
● After using chlorine bleach, wash the tub with
the 9 VỆ SINH LỒNG GIẶT (Tub Hygiene)
program without bleach. (P. 11)
● Do not use bleach for the 3 GIẶT NHẸ
(Delicate) program.
Putting in softener
● Softener is automatically released during the
nal rinse process.
● To add softener during operation, press
“Pause” rst.
●Up to about 70 ml can be added. To add more
softener, use the 4 GIẶT NGÂM NƯỚC XẢ
(Fragrance) program.
● Close the cover securely after the softener is put in.
●When using
concentrated softener,
dilute it with water
before putting it in.
NOTE
● Softener cannot be used with the 7 TIẾT
KIỆM NƯỚC (Water Save) program.
● Do not use separated or solidied softener.
● If “Pause” is pressed during spin cycle,
the softener will be added too early and its
effectiveness will decrease.
●The softener will not be added automatically if
not put in by the time wash process is complete.
Concentrated
softener Water Water
Put in detergent, bleach and
softener according to the water
level displayed.
● Follow the instructions on each package.
■Bleach / Liquid Detergent (in Preset mode)
■Softener
■Detergent
●Attach the bleach inlet cover if it comes off.
NOTE
● Turn the tub by hand if it is difcult to put
in the softener or bleach inlet. (P. 10)
● When the timer is preset in Preset mode,
put liquid detergent in the bleach inlet.

WashingDetergent
7
Washing
Preparation:
● Check if the washing machine is properly installed. (P. 12)
● Turn on the water faucet.
1After loading laundry
Turn the power on.
2Select a program.
(P. 5)
e.g.)
1
GIẶT THƯỜNG
(Normal) program
● To select the Baby-care
program
→Press “Baby-care”
■Timer preset
3Start.
The pulsator moves without
water and measures the
amount of laundry (approx.
5 seconds).
Water level indication
(approx. 5 seconds)
Remaining time indication
● To check the water level
→Press “Water Level”.
● To check the program
→Press “Program”.
4According to the water level indication
Put in detergent.
●Approx. 20 seconds after the water
level is displayed, water supply begins.
5Close the lid.
Operation ends with beeps.
Set how many hours later to nish
operation. (P. 4)
● 2 minutes after start-up, all indications
except “Preset” turn off.
● To conrm after the timer has been set,
press “Preset”.
● To cancel or change, press “On/Off”.
●The hours that can be set differ depending
on the program.
■After pressing “Start”
● You can change the water level until the
end of the wash process.
● You cannot change the program.
Timer preset 2 13
When the 4 GIẶT NGÂM NƯỚC XẢ
(Fragrance) program is selected
The buzzer sounds before the nal rinse
and operation is paused. Put the desired
amount of softener which has been
diluted with water directly into the tub.
5 beeps
● If the lid is left closed, the buzzer sounds
every 10 minutes for up to 1 hour.
● If the lid is left closed for more than 1
hour, operation resumes.
● The 4 GIẶT NGÂM NƯỚC XẢ
(Fragrance) program cannot be selected
when Child Lock (P. 10) is set.

8
Washing Options
ECONAVI
Available in the 1 GIẶT THƯỜNG (Normal)
program, this function automatically
adjusts the operation time and water
level according to the detected amount of
laundry and water temperature.
ECONAVI will not work if you change the
water level or process settings.
■Lamp indications
• Flashing: Detecting
• Lighted: ECONAVI enabled
• Unlit: ECONAVI disabled
■Switch on/off
1
2 Select the 9 VỆ SINH LỒNG GIẶT
(Tub Hygiene) program.
3 Press and hold for 3 seconds
4 to select (On) or (Off)
56 beeps
* Test conditions:
• 1 GIẶT THƯỜNG (Normal) program
• Comparison between ECONAVI-enabled
operation (amount of laundry: 2 kg, water
temperature: above 35 ºC) and
ECONAVI-disabled operation (amount of
laundry: 8.0 kg (rated capacity), water
temperature: below 15 ºC)
• Test was conducted based on IEC60456
except for water temperature.
GIẶT NHẸ (Delicate)
Use this program to gently wash delicate
clothes and stylish garments.
Load laundry evenly.
● Load lighter items rst and
press them from above.
●Use laundry nets for delicate
underwear only.
● Amount that can be washed
at one time:
55 L 4.2 kg
47 L 3.0 kg
NOTE
● Do not use bleach.
● Use liquid delicate detergent.
●After operation ends, take out clothes immediately.
(To prevent wrinkles and colour staining)
CHĂN MÀN (Blanket)
■Washable blankets
• Material: 100 % synthetic bre or 100 %
cotton
• Weight: 4.2 kgor less
• Blankets with a machine-washable tag
attached
● Put a blanket in the net and load it in the tub.
Roll ● The zipper part
should face up.
(To prevent
damage to the
net)
NOTE
● Use liquid detergent.
● The water level indication shows the
maximum and cannot be changed.
Change process settings Select a program
ECONAVI lamp

Washing Options
9
Wash / Rinse / Spin
Preparation: Turn on the water faucet.
1After loading laundry
Turn the power on.
2According to your purpose
Change process
settings.
● Change the water level
as necessary.
● You cannot select rinse
process alone.
3After closing the lid
Start.
Operation ends with
beeps.
SẤY BẰNG GIÓ 90' (Air Dry)
Water is removed from clothes by the air
blown from the tub rotation.
■Clothes that can be dried
• Material: Synthetic bre
• Weight: 2 kgor less
1After loading clothes and closing the lid
Turn the power on.
2
Select
8
SẤY BẰNG GIÓ
90’ (Air Dry) program.
3Start.
After 90 minutes, drying
ends with beeps.
NOTE
● Clothes may not be sufciently dried
depending on the amount and type of clothes,
the temperature, and the installation condition
of the washing machine.
● Since no heater is used for this function, you
may feel that clothes are cold and half dry.
Contents of Programs
Program Total time
(approx.) Wash Rinse Spin
1 GIẶT THƯỜNG (Normal) 55 min 11 min Twice 5 min
2 GIẶT NHANH (Speedy) 40 min 3 min Twice 3 min
3 GIẶT NHẸ (Delicate) 40 min 9 min Twice 1 min
Baby-care 65 min 11 min Twice 7 min
4 GIẶT NGÂM NƯỚC XẢ (Fragrance) 75 min 11 min Twice 5 min
5 CHĂN MÀN (Blanket) 65 min 13 min Twice 3 min
6 GIẶT NGÂM (Soak) 85 min 39 min 1) Twice 5 min
7 TIẾT KIỆM NƯỚC (Water Save) 90 min 12 min 4 times 5 min
9 VỆ SINH LỒNG GIẶT (Tub Hygiene) 140 min 2) 63 min Twice 30 min
NOTE
●Total time is an estimation.
(When the standard water supply rate is
15 L / min)
● Total time may increase depending on low
water pressure, bad draining conditions, and
the amount and type of clothes.
1) This includes soaking time and washing time.
2) Remaining time of 90 minutes or less will be
displayed.

10
Maintenance Convenient Functions
Cancelling end buzzer
1Pressing down,
press.
Then hold on for
3 seconds. 2 short
beeps
● To reset, do the same procedure. 4 short
beeps
Setting Child Lock
To prevent children from falling into the tub and
drowning, if the lid is opened while the washing
machine is operating, this function sounds a
buzzer until it is closed. Not closing it within 10
seconds ushes the water out.
● This function does not lock the lid and button
operations.
● When water is drained forcibly, “U 99” is
displayed. (P. 15)
1After closing the lid
Turn the power on.
2Press and hold for
5 seconds. 2 short
beeps
●To cancel, do the same procedure. 4 short
beeps
Turning the tub by hand
If it is difcult to reach the softener or bleach inlet.
1Turn the power on.
2When a clicking sound
is heard
Turn the tub.
(Clockwise only)
NOTE
● If there is water in the tub or “Start” is
pressed, the tub cannot be turned.
Lint lter
After each operation
Lint lter
1Remove the
lter.
2Open the lter
and remove
lint.
● If lint is difcult
to remove, soak
and wash the
lter in water.
3Attach the lter in its original
position.
1 2
3 4 Click
NOTE
● Do not wash laundry without the lter.
(To prevent damage to clothes)
● Turn the tub by hand if it is difcult to remove
the lter.
● If the lter is broken, purchase a new one at
nearest Panasonic Service Centre.
● Separate clothes following instructions (P.5)
before operation so that lint can be collected
by the lter.

Convenient Functions Maintenance
11
Water supply lter
If water does not ow smoothly
NOTE
● Do not throw away or puncture the
lter to avoid damaging feeding
valve.
● Please clean the feeding valve
frequently if there is impurities in
water supply such as mold, iron,
etc.
● Follow the procedure below to prevent
splashing of water.
1After turning off the water faucet
Turn the power on.
2Start.
3After approx. 40 seconds
Turn the power off.
4Loosen the
nut and
remove the
hose.
Tub
Once a week <SẤY BẰNG GIÓ 90' (Air Dry)>
1After operation ends
Run the 8 SẤY BẰNG GIÓ 90'
(Air Dry) program without
loading laundry. (P. 9)
Once a month <VỆ SINH LỒNG GIẶT (Tub Hygiene)>
Preparation: Turn on the water faucet.
1Without loading laundry
Turn the power on.
2
Select the
9
VỆ SINH
LỒNG GIẶT (Tub
Hygiene) program.
3Start.
When the tub is lled with
water
Pause.
4Put bleach in the tub.
● Use chlorine bleach for
clothes.
Approx. 200 ml
5After closing the lid
Start.
After approx. 2 hours,
tub cleaning ends.
Detergent case
Wash with water.
■How to remove
After pulling the case all
the way out, pull it obliquely
upward to remove it.
5Remove the lter and remove
dirt on the lter.
Water supply lter
Main unit, lid
If stained with detergent or softener
Wipe with a soft cloth.
(To prevent damage to resin parts or metal
corrosion)
● For heavy soil, wipe with a neutral kitchen
detergent.
● Do not splash water.

12
External drain
water hose
Water supply
hose
Water tap adaptor
Water supply
valve screw
Bottom cover
Installation
1. Check the location.
■Avoid the following locations for installation.
• Locations with a possibility of freezing
• Damp locations or locations where it may
be exposed to rain, etc.
(To prevent electric shock or re)
• Uneven or unstable locations
(on blocks, timbers, a table with wheels, etc.)
2. Attach the bottom cover.
1Insert the
bottom
cover along
the guides.
2Fix with a
screw.
Screw
3. Attach the external drain water hose.
1Connect.
Elbow
Do not direct the
elbow upward.
Insert all the way.
2Slide the
hose band
in the arrow
direction.
●Slide all the
way until it
stops. Hose band
NOTE
● Do not put the
hose tip under
water.
● Do not raise the
hose higher than
10 cm above the
oor.
10 cm
or less
● Do not extend
the overall
length to more
than 3 m.
3 m or less

Installation
13
■Make sure to ask a service person for installation. Do not install by yourself.
■If the installation, test run and inspection of the washing machine are not carried out following
this installation method, Panasonic will not be liable for any accident or damage caused.
4. Connect the water tap adaptor and water supply hose.
Water faucet
Water supply hose
Water tap adaptor
CAUTION
● Tighten the nut rmly.
● Do not twist, squash,
modify or cut the hose.
Part A
Flange
Thread
Lever
Claw
Screw
Elbow
Water supply hose
Nut
Water supply
valve screw
1
Connect the water tap
adaptor to the water faucet.
1
Turn part A to the left until approx.
4 mm of the thread becomes visible.
2 Loosen the 4 screws.
3 Connect to the faucet and
tighten the screws.
4
Turn part A to the right and tighten
securely. (To prevent water leakage)
2
Connect the water supply
hose to the water tap adaptor.
Insert the hose into the adaptor
while pushing down the lever,
and hook the claw of the lever on
the ange of the adaptor.
3Connect the water supply
hose to the water supply
valve screw.
1
Hold the elbow and tighten the nut.
2
Check that the elbow is not loose.
5. Connect the power plug and grounding wire.
● Ask a service person to do the grounding work.
● In case of a 2-pin power cord, establish a ground.
6. Check that the washing machine is level.
■Check the balance state using a plummet:
1
Take upper edge of the body as the base. From this
position, release the string to make it vertical to the ground.
2 Take lower edge of the body as the base. Measure
the distance from the edge to the string. The
distance must be less than 10 mm to the left, to the
right, to the front, and to the back of the machine.
■If the washing machine wobbles
3 Turn to
the right
to tighten.
1 Turn the adjustable leg
knob to the left to loosen.
2 Turn the
adjustable leg
to eliminate
wobble. To lowerTo raise
Body
Upper
edge
String
Plummet
Less than 10 mm
Lower
edge
7. Perform a trial operation.
● Check that there is no water leakage, abnormal sounds or error display.

14
Troubleshooting
Symptoms Points to be checked
Time
Time indication
increases or does not
change
● Time indication is approximate. Remaining time is
corrected during operation and displayed.
Operation time is longer
than the time indication.
Operation does not stop
even after the preset time.
●The operation time may be longer if laundry is concentrated
on one side or the water supply or drainage is not good.
(P. 15 “U 11” “U 14”)
Main unit
No operation
● Power failure?
● Is the lid closed completely?
● Has the power fuse blown or the breaker tripped?
● Is the power plug inserted completely?
● Is the water faucet turned on?
● Did you press “Start”?
● Is the timer preset?
Wash
No water supply
● Is the water faucet turned on?
● Water outage?
● Is the water supply lter clogged with dirt? (P. 11)
Water is supplied in the
middle of wash process.
● If the water level drops, water is added automatically.
● With a large amount of laundry, water is added several
times automatically.
The water level is too
high for the amount of
laundry.
● If laundry is wet or there is water in the tub before
operation, the water level may be higher.
The water level is too
low for the amount of
laundry.
● With light clothes (of synthetic bre, etc.), the water level
may be lower.
Rinse/Spin
Operation started with
rinse, but water is not
supplied.
● If there is no water in the tub, water is supplied after spin.
● If there is water in the tub, water is supplied after water
discharge.
Operation suddenly
changes to rinse process
in the middle of spin.
Only spin is desired, but
operation starts with
rinse.
● If clothes are concentrated on one side of the tub, the
washing machine automatically corrects unevenness by
starting rinse process.
(Place clothes as evenly as possible.)
Irregular rotation during
spin
● The tub rotation speed is adjusted to reduce foaming
during spin.
Others
Power failure/
The breaker has tripped.
●Operation will resume from the point where it was stopped when
the power is recovered “TỰ KHỞI ĐỘNG LẠI” (Auto Restart).
Water outage
● When water supply is recovered, remove the water supply
hose, release turbid water from the faucet, and then start
the washing machine.
Cannot select the
4 GIẶT NGÂM NƯỚC XẢ
(Fragrance) program.
● If Child Lock (P. 10) is set, the 4 GIẶT NGÂM NƯỚC
XẢ (Fragrance) program cannot be selected.

Troubleshooting Error Display
15
Error Display
● The buzzer sounds and “U”/“H” and a number are alternately displayed.
● Cancel Child Lock (P. 10) if it is set.
Error display Points to be checked
Water cannot drain.
Check the drain water hose for the following abnormalities:
● Is it crushed?
● Is it clogged with lint?
● Is the hose tip under water?
● Is it partially raised higher than 10 cm above the oor? (P. 12)
● Is the total length longer than 3 m (including the extension hose)?
(P. 12)
When the above problems are solved, you can resume operation by
opening and closing the lid.
The lid is open.
● Did you try to run the washing machine with the lid open?
→Close the lid.
Spin or Air Dry is not possible.
● Are clothes concentrated on one side of
the tub?
→Distribute the clothes evenly and close
the lid.
● Is the washing machine installed on an
unstable or inclined surface?
→ You can resume operation by opening
and closing the lid.
Water cannot be supplied.
● Is the water faucet turned on?
● Water outage?
● Is the water supply lter clogged with dirt? (P. 11)
→You can resume operation by opening and closing the lid.
Water has been forcibly drained.
● Water has been forcibly drained because the lid was open for 10
seconds or more with Child Lock (P. 10) set.
→ Unplug the power cord and plug it in again after 5 seconds.
Inspection is required.
● Unplug the power cord. Then, report the error displayed (2-digit number
after “H”) to a service person.

Specications
http://www.panasonic.com
© Panasonic Appliances Vietnam Co., Ltd. 2016
16
NA-F80VG8
Rated voltage 220 - 240 V
Rated frequency 50 Hz
Rated power consumption 380 W
Standard water amount 66 L
Maximum capacity 8.0 kg
Product dimensions 595 mm (W) x 626 mm (D) x 995 mm (H)
Product weight 34 kg
Pressure of tap water 0.01 - 1 MPa
* Operation is guaranteed with the voltage uctuation from 195 V to 245 V, but not for performance.