Pandigital PANSCN05 User manual

Photo, Slide & Negative Converter
Quick Start Guide
Use “Scan2PC Manager” Software (scan directly to PC)
Double-click on
PDSCAN/
Pandigital/Ulity/
Scan2PC_Setup_
Vxxxx.exe
Insert Pandigital SD
card (included with
scanner), and then
power on.
Scan to PC Manager
window opens.
Select Scan2PC,
set locaon to save
scanned images,
and then click Apply.
Scan your photos or
filmstrips. The scanned
images will be saved in
PHOTO1 folder.
QG-E-PANSCN05_v1.0_08-09
Connect to PC (access scanned images on memory card)
1 2 3 4
Insert memory card
and power on
Connect USB cable Windows Vista
Select “Always do
this...” and “Open
folder to view files”
Windows XP
Select “Open folder
to view files...”
In the Windows Explorer
window, double-click on
the drive associated with
the scanner (i.e., PDSCAN),
and PHOTO1 folder which
contains the scanned images.
OR
Converter
PC
System
requirements:
Windows XP,
Vista, Windows 7
32-Bit
(not supported
on Macintosh)
10MB free
hard disk space
1 2 3 5
Scan Photos (directly onto memory card)
Insert original level
and flat into feed slot.
5
1
Plug in Insert memory card Power on
2 3
Wait for
blinking
to stop
6
Power/Status card
light will flash as
scan is processed.
Wait for
blinking
to stop
before
inserng
another original
4
Connect USB cable
A Windows Explorer
window will open
Converter
PC
Note:
To avoid changing Windows Explorer sengs on your PC,
scan all photos before connecng USB cable to PC to complete transfer.
It is recommended to use
the plasc sheath for old
photos or for those that
may be slightly curled
4
Scan 35mm Negatives & Unmounted Slides (directly onto memory card)
The filmstrip or slide
will be fed into the slot
and scanned.
5
1
Plug in, insert memory
card, and power on
as per steps 1-3 above.
2 3 6
Power/Status card
light will flash as
scan is processed.
Wait for
blinking
to stop
before
inserng
another filmstrip
Slide the paper guide
lever all the way to
the right side of the
feeding slot.
4
Align the negave &
slide adapter with the
grooves and then
gently insert all the way
into the feeding slot.
Wait unl lights are in
ready state, and then
insert the negave or
unmounted slide into
the adapter.
Be careful not to bend
the metal parts on the
adapter
CUSTOMER SUPPORT - Check our website,
http://www.pandigital.net/support,
for Customer Support telephone number
NOTE: Complete User Guide is on the SD card
Located in the Documentaon folder