Panduit Net-Verse D Series User manual

© Panduit Corp. 2016 INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
V00029LF
Page 1 of 4
Net-Verse D-Type E-Rails
Part Number(s) : D2ER* & D5ER*
Tool List:
• T25 Torx driver
M5x0.8 x 10mm
Pan Head Torx Screw
Qty: 10
Front of
Cabinet
Net-Verse
D -Type
Cabinet
D*ER*
Installed
Can be installed in
Front or Rear of Cabinet
E-Rails
Qty: 1 Left & 1 Right
E-Rail Center Monting Brackets
Qty: 1 Left & 1 Right

© Panduit Corp. 2016 INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
V00029LF
Page 2 of 4
Install E-Rails on 600mm wide Cabinets
(3) M5 Button Head Screw
(use T25 Torx bit)
Install M5 Button Head Screws
to 2.7 ± 0.3 N·m [23.9 ± 2.7 in-lbs]
1
2
• Attach hooks on top and middle of E-Rails into grooves in the Cabinet frame
• Adjust the E-Rails to desired position and secure with M5 screws to 2.7 ± 0.3 N·m [23.9 ± 2.7 in-lbs].
Cabinet
frame groove
E-Rail
Hook

© Panduit Corp. 2016 INSTALLATION INSTRUCTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
V00029LF
Page 3 of 4
Install E-Rails on 800mm wide Cabinets
• Attach the E-Rail Center Mounting Brackets to the E-Rails with a 3.0mm offset for 800mm Wide Cabinets. Attach with
(1) M5 screw tightened to 2.7 ± 0.3 N·m [23.9 ± 2.7 in-lbs] per E-Rail.
• Attach the hooks on top of E-Rails and the Center Mounting Brackets into grooves in the Cabinet frame.
• Adjust the E-Rails to desired position and secure with M5 screws to 2.7 ± 0.3 N·m [23.9 ± 2.7 in-lbs].
3.0mm
(1) M5 Button Head
Screw per E-Rail.
(use T25 Torx bit)
Install M5 Button
Head Screws to
2.7 ± 0.3 N·m
[23.9 ± 2.7 in-lbs]
E-Rail Center Mounting Bracket
Top View showing 3.0mm offset
1

© Panduit Corp. 2016 INSTALLATION INSTRUCTIONS V00029LF
Page 4 of 4
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
E-mail:
[email protected]
Phone:
866-405-6654
www.panduit.com
TOP AND BOTTOM
(2) M5 Button Head Screw
(use T25 Torx bit)
Install M5 Button Head Screws
to 2.7 ± 0.3 N·m [23.9 ± 2.7 in-lbs]
MIDDLE
(2) M5 Button Head Screw
(use T25 Torx bit)
Install M5 Button Head Screws
to 2.7 ± 0.3 N·m [23.9 ± 2.7 in-lbs]
2