PANELWARE MAPWP150-0E User manual
DEUTSCH
1
ENGLISH
Vorwort
Dieses Handbuch wurde in zwei Sprachen verfaßt. Um Ih-
nen die Handhabung zu erleichtern, ist der deutschsprachi-
ge Teil mit einem dunkelgrauen Balken und der englisch-
sprachige durch einen hellgrauen Balken gekennzeichnet.
Preface
This manual has been written in English and in German. In
order to differentiate between the two languages quickly, the
German section has a dark grey bar and the English section
has a light grey bar.
2
Inhaltliche Änderungen dieses Handbuches behalten wir uns
ohne Ankündigung vor.Die Bernecker und Rainer Industrie-
Elektronik Ges.m.b.H.haftet nicht für technische oder druck-
technische Fehler und Mängel in diesem Handbuch.Außer-
dem übernimmt die Bernecker und Rainer Industrie-Elek-
tronik Ges.m.b.H.keine Haftung für Schäden, die direkt oder
indirekt auf Lieferung, Leistung und Nutzung dieses Materi-
als zurückzuführen sind.
The information contained herein is believed to be accurate
as of the date of publication, however, Bernecker und Rai-
ner Industrie-Elektronik Ges.m.b.H. makes no warranty,
expressed or implied, with regards to the products or the
documentation contained within this book. Bernecker und
Rainer Industrie-Elektronik Ges.m.b.H.shall not be liable in
any event for incidental or consequential damages in
connection with or arising from the furnishing, performance
or use of these products.
51
ENGLISH
PANELWARE
P150 USER'S MANUAL
Version: 1.0 (May 1997)
Model No.: MAPWP150-0E
Windowsis a registered trademark of the Microsoft Corp.
MS-DOSis a registered trademark of the Microsoft Corp.
52
53
ENGLISH
Table of Contents
Preface ........................................................................................................................................................................................1
1 General Information ...............................................................................................................................................................55
1.1 Measurements.............................................................................................................................................................. 56
2 Technical Data........................................................................................................................................................................ 57
3 Installation ..............................................................................................................................................................................58
4 Component Overview ............................................................................................................................................................ 60
5 Component Description ......................................................................................................................................................... 61
5.1 LCD Display .................................................................................................................................................................. 61
5.2 Matrix Keypad...............................................................................................................................................................62
5.3 Controller ...................................................................................................................................................................... 63
5.3.1 Voltage Supply .................................................................................................................................................... 63
5.3.2 Interfaces ............................................................................................................................................................ 64
5.3.3 LEDs.................................................................................................................................................................... 67
5.3.4 Mode Switch Number Dial.................................................................................................................................. 68
5.3.5 Reset Button ....................................................................................................................................................... 69
5.3.6 Contrast Setting .................................................................................................................................................. 69
54
5.3.7 Lithium Battery.................................................................................................................................................... 70
5.3.8 FlashPROM......................................................................................................................................................... 71
6 Connection P150 - PLC ......................................................................................................................................................... 72
6.1 Cabling Schematics ..................................................................................................................................................... 73
7 Connection P150 - PC ........................................................................................................................................................... 76
7.1 Cabling Schematic ....................................................................................................................................................... 77
8 Connection P150 - Printer..................................................................................................................................................... 78
8.1 Cabling Schematic ....................................................................................................................................................... 79
9 Software ................................................................................................................................................................................. 80
9.1 Loading and Starting Panel Programs ........................................................................................................................ 80
9.2 P150 Operating System Update.................................................................................................................................. 82
10 Error Messages ................................................................................................................................................................... 83
11 Other Errors ......................................................................................................................................................................... 85
12 Accessories.......................................................................................................................................................................... 87
13 Conversion Tables................................................................................................................................................................ 92
Index .......................................................................................................................................................................................... 95
55
ENGLISH
1 General Information
The P150 MMI is a powerful and space saving operator
panel. It can be programmed using the PANELWARE Con-
figuration Software (PCS).The P150 MMI functions as an
intelligent panel controller.It is equipped with a 2 x 20 LCD
display, 16 key matrix keypad with key illumination and a
12 key numerical keypad. The operator panel provides a
programming interface (IF0), an RS232 interface (IF1) and
an RS422/485 interface (IF2) to handle communication re-
quirements. The unit is also equipped with a mode dial,
contrast setting, reset button, LED indications for interface
(TxD, RxD), halt and run on the back of the unit.All this is
integrated into a single compact housing (192 x 192).The
unit can be ordered with a blue or black housing.
56
1.1 Measurements
NOTE:
For the most part, measurements are given as metric values in this manual.There are metric to imperial conversion tables
provided in the last section of the English version of this document.
57
ENGLISH
Model Name P150 MMI
Model Number Blue - 4B1500.00-590, Black - 4B1500.00-590
LCD Display 2 x 20 characters
Matrix Keypads
Matrix Keypad 16 keys (incl.LEDs)
Numerical Matrix Keypad 12 keys
Controller Programmed using PANELWARE software
Supply Voltage 24 VDC (min.18 VDC, max 30VDC)
Interfaces
IF0 RS232 programming interface (not electrically isolated)
IF1 RS232 interface (not electrically isolated)
IF2 RS422/485 interface (electrically isolated)
Operating Temperature 0 to 50°C
Relative Humidity 10 to 90%
Shock According to IEC 68-2-27
Vibration According to IEC 68-2-6
Dimensions 192 mm, 192 mm, 62 mm (W x H x D)
2Technical Data
58
1) Insert mounting pins onto P150 panel. 2) Apply sealant to lip of P150 panel.
3 Installation
59
ENGLISH
3) The cutout measurements are 188 x 188 mm. Place
the P150 in panel cutout so that the lip of the unit face
is pressed against edge of the cutout. 4) Install spring clips onto back of P150 panel in order to
hold it in place.
60
1 Battery
2 Contrast Setting
3 Power Connection
4 Programming Interface (RS232)
5 Reset Button
6 Mode Number Dial
7 RS232 Interface
8 RS422/485 Interface
4 Component Overview
61
ENGLISH
5 Component Description
5.1 LCD Display
The P150 is equipped with a 2 x 20 LCD display.This display is back-lit (black on yellow). A contrast setting is available on
the back of the unit.The characters are 5 mm high.
62
5.2 Matrix Keypad
The P150 has two matrix keypads. The keypad on the left has 16 short-stroke keys with LED indication.The keypad on the
right is a numerical keypad with 12 short-stroke keys labelled with 0 to 9, enter and clear.
63
ENGLISH
5.3 Controller
The controller section of the P150 is equipped with a power connection, three interfaces, backup battery, mode switch,
Reset button, LED indicators and a contrast setting potentiometer.The controller is programmed using PANELWARE Con-
figuration Software (PCS). Downloading programs and updating the operating system is described in detail in "Software".
5.3.1Voltage Supply
PIN Label Description
1+ +24 V
2-GND ^
3WGround
4WGround
Power is supplied to the P150 MMI via a 4 pin terminal block. The ground pins are to be connected with ground using as
short a cable as possible. If the panel is mounted in a cabinet, the length of the cable can be a max. of 15 cm.
64
5.3.2 Interfaces
RS232 Programming Interface IF0
9 Pin D-Type Connector (M)
PIN RS232
1NC
2 RxD
3TxD
4 +5 V
5 GND
6NC
7 RTS
8 CTS
9NC
65
ENGLISH
RS232 Interface IF1
9 Pin D-Type Connector (M)
PIN RS232
1NC
2 RxD
3TxD
4 12 V
5 GND
6NC
7 RTS
8 CTS
9NC
66
RS422/485 Interface IF2
9 Pin D-Type Connector (F)
PIN RS422 RS485
1 SHIELD SHIELD
2TxD NC
3 RxD DATA
4NC NC
5 GND GND
6 +5 V +5 V
7TxD NC
8 RxD DATA
9NC NC
Interfaces IF1 and IF2 are basically only one interface.However, it is routed through a male and female connector because
of the different interface types. All interfaces are equipped with two LEDs which indicate if data is being transmitted or
received (see "LEDs").
67
ENGLISH
5.3.3 LEDs
The P150 MMI is equipped with a RUN LED, a HALT LED and interface LEDs.
68
5.3.4 Mode Switch Number Dial
The number dial is used to set the operating mode for the controller. Different operating modes can be activated by setting
the mode switch number dial to one of the following numbers. These operating modes affect how the unit behaves after a
power-on.
No. Mode Description
0 - 4 Res. Reserved
5 RUN MODE Download/run program
6 BOOTSTRAP MODE Install operating system
7 TEACH MODE Download/run program
8,9 Res. Reserved
A detailed description of the various modes can be found under "Software".
Table of contents
