Panio KD150AM User manual

USB DVI/VGA KVM Extender
With audio over CAT.5-IP
KD150AM
User’s Manual
Version 1.00

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 1 -
Index
1INTRODUCTION...................................................................................................................................... 2
1.1 FEATURES........................................................................................................................... 2
1.2 PACKAGE CONTENTS.......................................................................................................... 3
1.3 SPECIFICATIONS..................................................................................................................4
2 INSTALLATION...................................................................................................................................... 5
2.1 SYSTEM REQUIREMENTS.....................................................................................................5
2.2 PHYSICAL DIAGRAM...........................................................................................................6
2.3 HARDWARE INSTALLATION.................................................................................................7
3 OPERATIONS..........................................................................................................................................8
3.1 ACTIVE CONSOLE SELECTION BY PUSH BUTTON................................................................8
3.2 LED INDICATORS............................................................................................................... 8
3.3 SUN MICRO SYSTEM FUNCTION KEY EMULATION:............................................................9

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 2 -
1Introduction
Thank you for purchasing of USB DVI/VGA KVM Extender with Audio.
This KVM extender supports both of VGA and DVI video input that
resolution up to FULL HD 1080P. The extension distance of the signal of
Video / Audio / IR / Keyboard & Mouse is up to 150 meters over CAT5e/6,
and moreover, for longer distances extending, consecutively added network
switch for an additional 150 meters as many times as you want. No software
is required and furthermore the installation and operation are easily more
than expected. This product, USB DVI/VGA KVM Extender with Audio,
delivers perfect performance and value added to satisfy your need.
The USB DVI/VGA KVM Extender with Audio is composed of a local
unit (transmitter) and a remote unit (receiver). The local unit connects
directly to the computer (or a KVM switch system). The user console
(keyboard, mouse and DVI monitor) attaches to the remote unit. The remote
and local units extend keyboard, mouse, IR, audio and video signal along
with the Cat5e/6 cable. Local unit offers local monitor output according to
the computer (or a KVM switch system) video input.
1.1 Features
1 Extends the Video / Audio / IR / Keyboard and Mouse signal up to 150 meters using
Cat5e/6 cable in terms of peer to peer.
2 Longer distances extending by adding network switch for an additional 150 meters
as many times as you want.
3 Console operation optional - Control your system from both of the local and remote
units or local unit only by front button switch.
4 Push button at local unit to enable/disable remote console.
5 Supports keyboard/mouse connection of USB interface to computer at local side.
6 Supports either VGA or DVI video input - Up to resolution 1920x1080@ 60Hz.
7 Local unit supports VGA or DVI interface monitor according to video input.
8 Remote unit supports DVI-D interface monitor.
9 DDC, DDC2B support.
10 No software or driver installation required.
11 Compatible with most commonly used operating systems like DOS, Windows,
Linux, Mac OS/OSX and Sun Microsystems.
12 Supports BIOS level operation.

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 3 -
13 Plug and Play.
14 Supports Microsoft Intellimouse 3 ~ 5 key mouse & Microsoft Natural Keyboard
Pro series.
15 Support SUN Microsystems function key emulation.
16 Supports True USB HID Emulation for the majority of HID devices.
1.2 Package Contents
The product you purchased should contain the equipment and accessories
shown as follows:
1 1 x KVM Extender- Local Transmitter.
2 1 x KVM Extender-Remote Receiver.
3 2 x VGA to DVI converter.
4 1 x DVI cable
5 1 x Audio/Microphone cable 1.8m
6 2 x External power adaptor DC 5V 2A
7 1 x User’s Manual

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 4 -
1.3 Specifications
Transmitter Receiver
Console
Connectors
Video Out 1 x DVI-I 1 x DVI-D
Keyboard 1 x USB Type A Female 1 x USB Type A Female
Mouse 1 x USB Type A Female 1 x USB Type A Female
Speakers 1 x Audio Jack Female (Pink) 1 x Audio Jack Female (Pink)
Microphone 1 x Audio Jack Female (Green) 1 x Audio Jack Female (Green)
IR Blaster Receiver
PC Connectors Video In 1 x DVI-I N/A
USB USB Type B N/A
Extend Port RJ-45 For Keyboard, Video, Audio, Mouse and IR Extension
LED
TX/RX Active Red LED N/A
TX Active Green LED N/A
Power Red LED Red LED
Link Green LED Green LED
Console Switch Button Switching Sequence:
Local, Local + Remote N/A
DDC, DDC2 Monitor Supports DDC, DDC2B
CAT. Type & Length CAT 5e/6 Max. Length: 150m
Resolution Max. Resolution: Full HD 1080p (1920x1080@60Hz)
Operating systems supported Windows, Linux, Mac OS/OSX and Sun Microsystems
Power Supply DC 5V / 2A Power Adaptor
Dimension (LxWxH) 180x84x36 mm
Housing material Metal
Operating Temperature 32 - 122 F ( 0 - 50 C )
Humidity 0% - 80% RH

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 5 -
2Installation
2.1 System Requirements
Local Console
1 A VGA or DVI interface monitor according to video input
2 USB Keyboard/Mouse.
3 IR blaster (optional)
Precaution:
Local Console VGA video signal input Monitor Supported
Note: The converter must be used connecting to both of Local DVI-IN and DVI-OUT in
synchronization in case of the VGA video input comes into Local DVI ports.
Remote Console
1. A DVI interface monitor.
2. USB keyboard/mouse
3. IR receiver(optional)
4. Microphone and speaker (optional)
Computer
1 A DVI or VGA video port.
2 Type A USB port for keyboard and mouse.
3 Audio port (optional)
4 Operating system: DOS, Windows, Linux, Mac OS/OSX and Sun
Microsystems.
Transmitter Receiver
VGA to DVI Converter
for Local Console VGA
DVI-D
DVI-I
DVI- I

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 6 -
Cables
1 CAT5e/CAT6 cable to connect remote and local unit, the supported
maximum length of this cable is 150 meters with point to point.
Reset Switch :
Press Reset switch when you want to reset the system. This switch must be
pushed with a thin object like the end of a paper clip, or a ball point pen.
2.2 Physical Diagram
Transmitter
Front View
Rear View

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 7 -
Receiver
Front View
Rear View
2.3 Hardware Installation
1 Power off all of devices.
2 Connects your monitor, USB keyboard/mouse to the local unit Transmitter if you
want to control your system at local console possibly.
3 Connects your monitor, USB keyboard/mouse to the remote unit Receiver if you
want to control your system at remote console possibly.
4Connects all audio cable to computer,/KVM, speaker and micphone if necessary.
5Connects IR receiver to Remote Receiver and IR blaster to Local Transmitter if
necessary.
6 Connect remote and local unit by using CAT.5e/CAT.6 cable, the supported
maximum cable length is 150 meters with point to point.
7 Connects the 5V power supply to power on the local unit Transmitter.
8 Connects the 5V power supply to power on the remote unit Receiver.
9 Connects video and USB keyboard/mouse of local unit Transmitter and
computer/KVM.
10 Turn on your computer if it was turned off.

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 8 -
3Operations
3.1 Active Console Selection by Front Push Button
You can press front push button on local unit Transmitter (TX) to switch the active
console of operation, and there are two types of active console configurations:
1. TX Active
You can operate the system only from local unit Transmitter (TX).
2. TX/RX Active
You can operate the system Both of local unit Transmitter (TX) and remote
unit Receiver (RX) at same time.
The default configuration is “Both Console” mode, including both of local and
remote consoles activating. The active console can be shown via of LED indicator,
please refer the description of next sections
3.2 LED Indicators
TX/RX Active Indicator (RED)
Indicates you can control your system from both of the local and remote console.
TX Active Indicator (RED)
Indicates you can control your system from local console only.
Power Indicator (RED)
Indicates the KVM unit is power on.
Link Indicator (GREEN)
Indicates link connection established.

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 9 -
Transmitter (TX) – Receiver (RX) Connection, 150m Full HD 1080p
Extending longer distance Connection with Network Switch, Full HD 1080p

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 10 -
3.1 Sun Microsystems Function Key Emulation:
There are 16 special functions on the Sun Micro system keyboard, the KVM Switch can emulate
these function keys. Here is the mapping table for Sun Micro function key emulation. To active these
emulation, you have to press the LEFT Window KEY first (this key usually is located between the
left [Ctrl] and left [Alt]), then choice the second relative key.
Sun Micro System
Function Key
Emulation Key
Stop L_Win & L_Alt
Props L_Win & L_Ctrl
Compose L_Win & L_Shift
Front L_Win & F1
Open L_Win & F2
Find L_Win & F3
Again L_Win & F4
Undo L_Win & F5
Copy L_Win & F6
Paste L_Win & F7
Cut L_Win & F8
Help L_Win & F11
Power L_Win & F12
Mute L_Win & 1
Volume Down L_Win & 2
Volume UP L_Win & 3

USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 11 -
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any representations or
warranties (implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for
any loss of profit or any other commercial damage, including but not limited to special, incidental, consequential, or other
damages.
No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including
photocopying, recording or information recording and retrieval systems without the express written permission of the
manufacturer.
All brand names and product names used in this document are trademarks, or registered trademarks of their respective holders.
FCC Statement
This device generates and uses radio frequency and may cause interference to radio and television reception if not installed and
used properly. This has been tested and found to comply with the limits of a Class B computing device in accordance with the
specifications in Part 15 of the FCC Rules. These specifications are designed to provide reasonable protection against such
interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation.
If this device does cause harmful interference to radio or television reception, which can be determined by plugging the device in
and out, the user can try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the computer into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.