Panio TH-150A-TX User manual

HDMI KVM Chainable Extender
over CAT5e/6
TH150A
User’s Manual
Version 1.0

1. Introduction
Thanks for purchasing the HDMI KVM Chainable Extender over CAT.5e/6. We recommend
that you read this manual thoroughly and retain for future reference.
Features
HDMI KVM Chainable extender over Cat.5e/6 is the innovative solution applied for a wide
variety of HID devices extending in terms of excellent compatibility of “True USB
emulation” technique, even supports the latest 10- point touch screen, and signals extended
up to 150m between with high resolution Full HD 1080p, 1920 x 1080. With cascaded
chainable function, each remote receiver breaks out linking the other 2 remote receivers for
easy expansion. The local video monitoring and local USB Hub ports added for keyboard &
Mouse control, or downstream ports in use.
Extends the HDMI video and True USB HID signals up to 150m via Cat.5e/6
Supports high resolution up to Full HD 1080p, 1920 x 1080@60Hz, DDC, DDC2, DDC2B
Supports excellent True USB HID Emulation for touch screen, wireless
keyboard/mouse...etc. Supports 10-points touch screen
Cascaded-chainable receiver up to 10
layers IR remote control supported
Supports Local HDMI monitoring , Local USB Hub, and both of Audio ports
Each receiver (remote) breaks out linking the other 2 receivers for expansion if
needed EDID default and learning refresh fit to remote display
Package Contents
1. DisplayPort Extender Transmitter x 1
2. DisplayPort Extender Receiver x 1
3. Power Adaptor DC 5V x 2 ( set units ) or 1 ( single unit )
4. User’s Manual x 1

Specification
TH-150A-TX (Transmitter)
TH-150A-RX (Receiver)
Video Out
1 x HDMI (Female)
N/A
Local
Keyboard
1 x USB Type A Female
N/A
Mouse
1 x USB Type A Female
N/A
Console Ports
Speaker
1 x Mini Stereo Jack Female
N/A
(Green)
Local PC Ports
Video In
1 x HDMI (Female)
N/A
USB
1 x USB Type B (Female)
N/A
Video Out
N/A
1 x HDMI (Female)
Keyboard
N/A
N/A
Remote
Mouse
N/A
N/A
Console Ports
Speakers
N/A
1 x Mini Stereo Jack Female
(Green)
HID Device
N/A
1 x USB Type A (Female)
Extend Port
1 x RJ-45
3 x RJ-45
Local
Power
Red LED
N/A
LED
Link
Green LED
N/A
Remote
Power
N/A
Red LED
Link
N/A
Green LED
DDC, DDC2 Monitor
Supports DDC, DDC2, DDC2B
IR
Unidirectional ( from RX to TX )
Category Type & Length
Cat.5e/6, max. Length: 150m
Resolution
Full HD 1080p, 1920 x 1080@60Hz
Operating systems supported
Windows, Linux, Mac OS/OSX and Sun Microsystems
Power Supply
DC 5V / 2A Power Adaptor
Dimension (L x W x H)
135 x 84 x 37mm
135 x 84 x 37mm
Housing Material
Metal
Operating Temperature
32 - 122 F ( 0 - 50 C )
Humidity
0% - 80% RH

2. Detail and Diagram
Detail Picture
Transmitter (TX)-Front Transmitter (TX)-Rear
: Reset button
: Power LED & Link LED
(Solid when link present)
: IR Blaster/ Emitter
: USB Hub Port for local control
: Cat.5e/6 cable connected
Receiver (RX)-Front
: HDMI out for local display
: Audio out ( Local )
: HDMI input ( Source )
: USB type B for PC control
: Connected to Power Adapter DC 5V
Receiver (RX)-Rear
: Reset button
: EDID refresh button
: Power LED & Link LED
(Solid when link present)
: USB Port for HID devices
: Audio Out (Local)
: HDMI output (remote display)
: Cat.5e/6 cable connected either one
: IR Receiver
: Connected to Power Adapter DC 5V

Application
KVM Transmitter
KVM Receiver
HDMI Cable
Local PC
Cat.5e/6 max.150m
USB Cable
HDMI Cable
Connect to Local PC
Keyboard / Mouse
Transmitter Installation
Remote Touch Panel
UTP Cable connected with KVM Transmitter to get the best display quality, please use CAT.5e/6
Cable, and the cable connector node is to connect to Transmitter LINE port (RJ45)
Connect the IR Blaster Emitter cable to the Transmitter Unit IR Port if
necessary. Connects Transmitter with HDMI cable to HDMI connector of PC.
Connects Transmitter with HDMI cable to HDMI connector of Display Monitor if necessary.
Connects Transmitter with USB cable (Type A to Type B), Type A connect to the HDMI
connector of PC, Type B connect to the KVM Transmitter.
USB Keyboard / Mouse plug to the USB connector in front of the KVM
Transmitter Plug DC 5V/2A power adapter.
Local PC Keyboard / Mouse connected
UTP Cable connected
USB Cable connected
IR Blaster /Emitter (Type A to Type B)
Monitor HDMI connected
Power Adapter
HDMI source conected
DC5V/2A

Receiver Installation
UTP Cable connected with KVM Transmitter to get the best display quality, please use
CAT.5e/6 Cable, and the cable connector node is to connect to Receiver LINE port (RJ45)
Connect the IR Receiver cable to the Receiver Unit IR Port if
necessary. Connects Receiver with HDMI cable to HDMI Monitor.
Connects Receiver with USB cable (Type A to Type A) to the USB connector of the
Touch Screen.
Plug DC 5V/2A power adapter.
Monitor HDMI connected
IR Receiver
Power Adapter
Connect to USB of Touch Screen,
DC5V/2A
USB Keyboard or Mouse,
UTP Cable connected
Or wireless KB/MS sensor
Cascade Chain Connection
Use UTP Cable connected with Receiver to link the other two (2) Receiver Units
consecutively to extend another 100m distance, the cable connector node is to connect to
Receiver LINE1 or LINE2 or LINE3 port (RJ45), as long as the LINE port is not
occupied, and user can continue expanding corresponding to custom demand as likely
Cascade/Tree Chain web architecture spread.
Connect the IR Receiver cable or RS-232 to 3.5mm adapter to the Receiver Unit IR Port
or RS-232 port if necessary.
Connect Receiver with HDMI cable to HDMI connector of Display
Monitor. Plug DC 5V/2A power adapter.
Each Receiver with three (3) Line port, one is used for source input, and the other two are used for
expanding source to other receivers. User can choose any LINE port as source input at random,
and use the other two LINE port for expanding source to next tier receiver as long as the LINE port
is not occupied.

Cascaded Chain Diagram
PC
RX
USB Cable
Each Level
HDMI Cable
USB Cable
HDMI Cable
Cat.5e/6 up to 100
RX
RX
Cat.5e/6 up to 100
USB Cable
HDMI Cable
HDMI Cable
USB Cable
Remote Touch Panel
RX USB Cable
HDMI Cable
Local Monitor Remote Touch Panel
RX USB Cable
HDMI Cable
Please be noted these Touch Screen or USB HID devices in the same cascade chain must be
the same in order to avoid signal conflict.
KVM Extender Application
KVM Transmitter
Local PC
KVM Receiver
Cat.5e/6 max.150m
Connect to Local PC Remote Control
Keyboard/Mouse
Connect to USB Keyboard or Mouse
Or Wireless KB/MS Sensor

AV Extender Application
(Connect to HDMI or DisplayPort Receiver)
HDMI Receiver
Model: HD-1002
HDMI Cable
HDMI Out
KVM Transmitter KVM Receiver
DisplayPort Receiver
Cat.5e/6 up to 100m Model: DD-1000R
HDMI Cable
USB Cable
DP Cable
Remote Touch Panel DP Out
Hub Extend Function
PC
Cat.5e/6 up to 100m
RX
USB Cable
HDMI Cable
USB Cable
HDMI Cable
Network Switch
TX
Cat.5e/6 up to 100m
HDMI Cable
Network Switch
RX
USB Cable
HDMI Cable
Local Monitor

Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make any representations or warranties
(implied or otherwise) regarding the accuracy and completeness of this document and shall in no event be liable for any loss of profit
or any other commercial damage, including but not limited to special, incidental, consequential, or other damages.
No part of this document may be reproduced or transmitted in any form by any means, electronic or mechanical, including photocopying,
recording or information recording and retrieval systems without the express written permission of the manufacturer.
All brand names and product names used in this document are trademarks, or registered trademarks of their respective holders.
FCC Statement
This device generates and uses radio frequency and may cause interference to radio and television reception if not installed and used properly. This
has been tested and found to comply with the limits of a Class B computing device in accordance with the specifications in Part 15 of the FCC
Rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no
guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception,
which can be determined by plugging the device in and out, the user can try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the computer into an outlet on a circuit different from that to which the receiver is
connected. Consult the dealer or an experienced radio/TV technician for help.
CE / FCC