Pantum TEMPZOOM V User manual


PANTUM MALAYSIA SDN BHD
Page 1
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
USER MANUAL
10.2-inch ANDROID SMART THERMAL SCANNER"
Automatic Body Temperature Detection
Version 1.0
MODEL-V
HIGHLIGHT
•Smart thermal scanner make use of thermal, infrared,
environment temperature and AI features concept.
•Quick body temperature measurement result in two
(2) seconds. This system is benefit for quick
scanning, no human error and high privacy.
•The system trigger alert automatically once the body
temperature is exceed the threshold.
•Connection with internet and CMS system with
encryption makes easy for recording, tracking,
analyses and statistic up to three (3) months.
•Integrate with NFC for door access
•10.2-inch IPS technology LED display.
•Omron thermal sensor with RoHS Certificate of
Compliance.


PANTUM MALAYSIA SDN BHD
Page 2
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
Table of Contents
Page
User Manual with Highlight
01
Table of Contact
02
Disclaimer
03
About the Manual
03
Warning and Precaution
03
Packaging Check List
03
Hardware Specification
04
Hardware Overview
05
User Interface Overview
05
Temperature Screening Procedure
06
Temperature Screening Hints
06
Smart Thermal Scanner Software Setting
07
Android Related Setting
08 - 09
CMS Cloud Control System
09 - 10
Diagram
10


PANTUM MALAYSIA SDN BHD
Page 3
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
Declaimer
This manual contains information on the operation and maintenance of the Pantum Malaysia equipment. The copyright in
all documents, drawings, etc.
The contents of this manual must be read as a whole before starting the operation and maintenance of the supplied
equipment. If any of the content(s) of the manual seems unclear or incomplete, please contact Pantum Malaysia before
starting the operation and maintenance.
It is an essential pre-requisite for the satisfactory operation and maintenance that the operating and maintenance
personnel are fully familiar with the design and the said personnel have received thorough training in operation and
maintaining the machine/unit/equipment. It is further essential for the safe operation of the machine/unit/equipment that
personnel has read, understand and followed the safety instructions contained in the manual.
This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
Pantum Malaysia periodically changes the information herein which will be incorporated into new additions/amendments to
the manual. Pantum Malaysia reserve the right to add, delete, amend or modify the information contained in the manual
from time to time in the form of circulars, letters, notes, etc. for better operation and safety of the machine/unit/equipment.
The said additional or amendments are meant for improvement / better operations of the machine/unit/equipment and
such amendments shall not give any right to claim any compensation or damages under any circumstances.
The products will be updated from time to time without prior notice. If there is any issue related to the product, please
contact us.
PANTUM MALAYSIA SDN BHD
Tel!: [phone]
About the Manual
This manual introduces the operations of TEMPZOOM MODEL-V product. All figures displayed are for illustration purposes
only. Figures in this manual may not be exactly consistent with the actual product.
Warning and Precaution
๏The operation temperature of Smart Thermal Detector is 10 - 40 ℃(50 – 104 °F). Using this machine in extreme
environment may lead to damage of the machine
๏When Smart Thermal Detector shows elevated temperature (Yellow or Red), adjust the position to measure again /
use other thermometer to measure the temperature accurately. If you have other signs of illness, Please consult your
doctor immediately
๏Smart Thermal Detector is designed to be a rapid screening tool for temperature. This product is not designed to
diagnose any disease or as a substitute for the consultation of the doctor
๏Insert the power adapter fully into the main socket
๏Do not touch the power adapter with wet hands
๏Do not expose this machine to rain or excessive moisture. This machine must not be exposed to dripping or splashing
water
๏Do not expose this machine to direct sunlight and other sources of heat
Packaging Checklist
10.2-inch ANDROID SMART THERMAL SCANNER
ITEM
DESCRIPTION
QUANTITY
1
Smart Thermal Scanner
1
2
DC 12V Power Adapter
1
3
User Manual
1
4
Smart Thermal Scanner Wall Mount with Accessories
1


PANTUM MALAYSIA SDN BHD
Page 4
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
Hardware Specification
Model
MODEL-V
Screen size
10.2-inch
Resolution
1280 x 800
Panel Technology
IPS LCD Display
Contrast
1:800 (Typ.)
Brightness
250 cd/m²
Surface
Anti-Glare Tempered Glass
CPU
Cortex - A7 Quad Core 1.2GHz
GPU
Mali 400 MP4
Memory
1 GB
Storage
8 GB
Operation System
Android 7.1
Internet Connection
Wi-Fi 2.4Ghz / LAN
Audio
10W
Interface (Input / Output)
DC Power x 1
3.5mm Audio x 1
Micro SD Card x 1
USB x 2
RJ45 x 1
Measuring Distance
10 - 35 cm
Measuring Accuracy
±0.3°C (Typ.)
Thermal Detector Sensor
OMRON MEMS Thermal sensor with RoHS Certificate of Compliance
Optical Sensor
200 MP Full HD Camera
Distance Sensor
Laser range sensor, 940nm laser classified as class 1 under operation condition by IEC
60825-1: 2014-3rd edition
Environment Thermometer
Platinum Resistance Temperature Detector, comply with DIN EN60751
NFC Sensor
NXP MFRC522, support ISO/IEC 14443A/MIFARE® cards
Power Adapter
Input: AC 110 - 220V
Output: DC12V 2A
Power Consumption
12 Watt
VESA Mounting (mm)
75 x 75
Net Dimension (mm)
H382 x W243 x D27
Gross Dimension (mm)
H500 x W295 x D83
Net Weight (kg)
1.5
Gross Weight (kg)
2.0
Certificates
CE, FCC
Warranty
One (1) year warranty against manufacturing defect
Accessories
Smart Thermal Scanner x 1
DC12V Power Adapter x 1
User manual x 1
Smart Thermal Detector wall mount x 1
Option Accessories
Floor stand, Mobile stand, Wall mount bracket, Desktop mount bracket


PANTUM MALAYSIA SDN BHD
Page 5
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
FRONT VIEW
BOTTOM CONNECTION VIEW
Hardware Overview
1
Thermal Detector Sensor
6
DC Power Input
2
Distance Sensor
7
3.5mm Audio Out
3
Environment Thermometer
8
Micro-SD Card Slot
4
Optical Sensor
9
USB Port
5
10.2-inch LED Display
10
USB Port
6
NFC Secsor
11
RJ45 LAN Port
User Interface Overview
1
Temperature Detection Standard
2
Temperature Detection Area
3
Setting
4
Date and Time
5
NFC Card Information
1
2
3
4
5


PANTUM MALAYSIA SDN BHD
Page 6
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
Temperature Screening procedure
1. Tap NFC card on the NFC Sensor if you would like to record detection with your
personal detection (if applicable)
2. Move your head towards the Smart Thermal Scanner until your face covered most
area of the human shaped frame of the detection area (The distance between
device and a user whose height 140cm to 180cm is recommended to be 30 cm.
User may slightly move forward and backwards to improve the quality of facial
image capture) Detection area will shows a scanning animation when the distance
is appropriated. If no scanning animation is shown, move your head closer to the
machine. The Screening will start immediately once the animation is shown. (Note:
During enrolment and verification, please remain nature face expression and
standing posture.)
3. Try to keep the face in the centre of the screen during registration. Please face the
face infant of the camera stay still wait for 1 seconds until the face register and
display shows the screening result.
4. Display shows below screening result regarding to the use body temperature
32°C - 37.3°C
(89.6°F - 99.1°F)
GREEN "
Normal Body Temperature
37.4°C - 38°C
(99.2°F - 100.4°F)
YELLOW "
Mild Fever
38.1°C - 42°C
(100.5°F - 107.6°F)
RED"
High Fever
Temperature Screening Hints
To ensure temperature screening result accurate, please avoid below environment factors#
Factors
Effects
Room temperature too high / too low
Deviations will be found in measuring result
Obstruction found between the face and the measuring device
Measure unsuccessfully
Measuring too far
Inaccurate measuring result
Users should avoid measuring temperature in the cases below, wait for 20 minutes before measuring the temperature
Situation
Effects
After intense exercise
Measure result will be high
After hot bath
Measure result will be high
After long time exposure to directly sunlight
Measure result will be high
Wearing too many clothes / not enough cloths
Measure result will be high / low
Note: The distance between device
and a user whose height 140cm to
180cm is recommended to be 30
cm. User may slightly move forward
and backwards to improve the
quality of facial image capture


PANTUM MALAYSIA SDN BHD
Page 7
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
Smart Thermal Detector Software Setting
Connect USB Mouse to the Smart Thermal Scanner for detail settings of the software.
Consult your IT Administrator before the setting.
Click the setting icon by moving the mouse cursor with your
connected mouse
Configuration page will be shown immediately.
Basic Setting "
1. Capture photo when body temperature detected exceed
37.3˚C / 99.1˚F
• By Enabling this function, photo will be captured when
abnormal body temperature is detected (ie: Yellow and
Red).
2. Capture photo when body temperature detected
successfully
• By Enabling this function, photo will be captured after the
detection no matter what the result is detected.
3. Enable smart camera detection
• By Enabling this function, temperature screening will only
be started when human face is detected.
4. Enable measuring over 35cm distance
• By Enabling this function, measurement will be started
even detected distance is over 35 cm.
5. Display in ˚F (Degree Fahrenheit)
• Change display of ˚C into ˚F
Advanced Setting "
It is not necessary to set the advanced configuration in normal
usage. Please contact your local supplier before making any of
the advanced setting.
1. Kiosk – Machine ID
• Enter the Machine ID provided by your local supplier.
Make sure the machine is connected to the internet
before activating.
2. Cloud Server Address
• Enter the CMS web address in order to connect to the
cloud platform. This value is usually pre-configured and
not necessary to configure.


PANTUM MALAYSIA SDN BHD
Page 8
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
Android Related Setting
Smart Thermal Scanner is running in Android platform. Besides those settings in the smart thermal detector software, there
are some basic settings to be set in android.
Connecting into WiFi network "
Smart Thermal Scanner supports connecting to the internet with both WiFi and LAN. Before using the Smart Thermal
Scanner, it is required to set the internet settings in the Android system.
Connect the mouse to Smart Thermal Scanner, right click the
mouse to exit the Smart Thermal Scanner software to go to the
Home screen of Android system.
Click on the Setting to enter the Android settings.
Enter Wi-Fi settings.
Select and enter the required information in order to connect to
the Wi-Fi network.


PANTUM MALAYSIA SDN BHD
Page 9
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
Adjust The Sound Volume
In android settings, go into the Volume settings.
Adjust the sound volume of the machine. It is not recommended
to adjust to higher than 90% volume.
CMS Cloud Control System
Smart Thermal Scanner can upload the information to the Cloud CMS system
Log-in To The CMS System
Use the Account and password provided by the supplier to log-
in to the CMS system.
After log-in, overview of the machine under your account will be
shown on the main page of the CMS.
Machine Status
• Device Status will show all the Smart Thermal Scanner under
the user account.
• Depending the installation location, information can be
entered into the location field for identifying different devices.
• In case of Inactivated device is found, connect the Smart
Thermal Scanner to the internet and activate it. Inactivated
device will not be able to upload the screening result on the
CMS platform.


PANTUM MALAYSIA SDN BHD
Page 10
SMART THERMAL SCANNER
USER MANUAL (Version1.0)
Copyright © 2020 mypantum.com. All rights reserved
Record
• Record will show all of the measuring record measured by
the machine under the account.
• Depending on the requirement, filtering by the NFC card
information / Temperature measuring result / Date & Time to
show the desired measuring result.
• Measuring record will be saved on the Cloud platform for 1
year, with a maximum record of 1 Million.
• Older data will be deleted in order to store the new data.
After showing the desired result, further actions like Saving as
CSV/Excel, printing can be done.
Statistic
Statistic can show the measuring record with by different
grouping method.
Diagram
Front, Side, Top and Bottom view Back view