Parrot Products GT1060P User manual

User Manual
Tel: (RSA) 010 140 4900 / Email: [email protected]
www.parrot.co.za
Graphics Tablet Wired
- GT1060P

1
Connection
Please connect the Graphics tablet to the PC USB 2.0/3.0 port
(Don’t connect to the front USB port of the PC).
Driver installation
1. After “Connection”, Please wait a minute. Then open “My PC” or “MY COMPUTER”,
find the “Pen Driver” CD-ROM. Open the “Tablet_Setup.exe” file to run
the driver installation.
2. Follow the installation wizard step by step to install it.

2
3. In the last wizard page, if you want to download the ‘Paint Tool SAI’ software,
Please Select it, then click ‘Finish.
4. Select the Download Path to save it.
5. When the download is completed, Open the sai.exe file then follow the wizard to install it.
6. If the following icons appear on the desktop, it indicates that the driver
installation is completed.

3
Light Status
The workspace light will light up when the tip of the pen touches the working area or
when the key of the pen is pressed in the induction zone.
Light
Note
1. Don’t use USB HUB or use USB extension cable to connect to PC.
2. If the pen is not used, don’t let the pen touch anything and avoid it
falling from high places.
3. Please don’t use two or more Graphic tablet devices at the same time.
4. In windows 7 system, please turn off flicks.
Key functions
There are 12 programmable keys on the left and 10 media keys on the top of tablet.
Eraser
Zoom
Brush size
Mouse wheel
fwd/back
Ctrl key
TAB key
Brush
Alt key
SPACE key
Mute
Vol +/-
Play/pause
Music Next/Prev
song Calculator
Browse Desktop
Switching

4
Pen setting interface
1. PC and Graphic tablet connection status.
2. Screen Mapping: It can modify the screen mapping area and the graphic tablet work area.
3. Levels Pen Pressure: From 0 to 8192 levels. The curve is used to show the pressure
levels, the levels change with the pressure of the pen.
4. Pressure fine tune: Used to adjust the pressure slightly. Default 0.
Can be used to observe the curve on the left.
5. The key setting of the pen:“-”custom function keys, default Crtl+z. “+”The fixed function key.
(For example Right button function of the mouse)
6. Customizable buttons.

5
Button Configuration
Replace pen nib
1. Remove the pen nib
using the nib removal tool.
2. Insert a new nib. 3. Secure it by pushing on it.
1. Open Driver setting interface; select Dened keys.
Select the key that you want to customize.
1
Use the keyboard to enter the key.
2
Select the Combination key, if needed.
3
Conrm it.
4