Particle PM2.5 User manual

1 - Description
This device is an air quality detector included several measures, intel-
ligent induction, and cloud data storage. It can detect PM2.5, PM10,
CO2, HCHO, TVOC, temperature and humidity. This device uses laser
scattering weight test method, with professional structure design,
professional fan, and original particle. It can sensitively and precisely
detect and monitor PM2.5 and PM10, helping you know your indoor
air quality. It uses professional CO2 Sensor, can remind you to open
windows when indoor concentration of CO2 is too high. HCHO can
detect formaldehyde and TVOC can detect indoor harmful gas, help
you know environmental pollution. In order to detect PM2.5, PM10,
CO2, HCHO, TVOC at the same time, it adopts reliable power supply
circuit to ensure all measures are precise and stable and work time is
as long as possible. This device adds rich experience of intelligence.
Wi-Fi module is optional. With cloud data storage, mobile phone you
can have a remote view of real-time data and access device controls.
Noise detection module is equipped. You can awaken device to start
measure by generate a slight noise when device is sleeping.
2 - Features
Model 1 Model 2 Model 3
Measure Mass Concentration of
PM2.5/PM10/HCHO üüü
Measure CO2 ü ü
Measure HCHO üüü
Measure TVOC ü ü
Measure Temperature & Humidity üüü
Wi Optional Optional Optional
3”TFT LCD Display, 240*400 Pixels üüü
5000 groups of sampling data
1 - Description
This device is an air quality detector included several measures, intel-
ligent induction, and cloud data storage. It can detect PM2.5, PM10,
CO2, HCHO, TVOC, temperature and humidity. This device uses laser
scattering weight test method, with professional structure design,
professional fan, and original particle. It can sensitively and precisely
detect and monitor PM2.5 and PM10, helping you know your indoor
air quality. It uses professional CO2 Sensor, can remind you to open
windows when indoor concentration of CO2 is too high. HCHO can
detect formaldehyde and TVOC can detect indoor harmful gas, help
you know environmental pollution. In order to detect PM2.5, PM10,
CO2, HCHO, TVOC at the same time, it adopts reliable power supply
circuit to ensure all measures are precise and stable and work time is
as long as possible. This device adds rich experience of intelligence.
Wi-Fi module is optional. With cloud data storage, mobile phone you
can have a remote view of real-time data and access device controls.
Noise detection module is equipped. You can awaken device to start
measure by generate a slight noise when device is sleeping.
2 - Features
Model 1 Model 2 Model 3
Measure Mass Concentration of
PM2.5/PM10/HCHO üüü
Measure CO2 ü ü
Measure HCHO üüü
Measure TVOC ü ü
Measure Temperature & Humidity üüü
Wi Optional Optional Optional
3”TFT LCD Display, 240*400 Pixels üüü
5000 groups of sampling data

3 - Specications
Particle Measure
Particle Channels PM2.5 / PM10
Mass Concentration Range 0-2000µg/m³
Resolution 1µg/m³
CO, Measure
Range 0-9999ppm
Accuracy ±5% or ±75ppm
Resolution 1ppm
HCHO
Range 0.00-5.00mg/m³
Accuracy ±5% F.S
Resolution 0.01mg/m³
TVOC Measure
Range 0.00-9.99mg/m³
Accuracy ±5% F.S
Resolution 0.01mg/m³
Temperature & Humidity Measure
Temperature Range -20-70ºC(-4-158ºF)
Temperature Accuracy ± 2ºC
Temperature Resolution 0.1ºC
Humidity Range 0-100%RH
Humidity Accuracy ±3.5%RH(20-80%RH) ±5%RH(0-
20%RHor 80-100%RH)
Humidity Resolution 0.1%RH
Intelligent Sensor
Noise Detect Sensor A slight noise can awaken device
Wi-Fi
Connection Properties 802.11b, 802.11g, 802.11n on 2.4GHz
Maximum Bit Rate 11Mbps@11b, 54Mbps@11g, 72Mb-
ps@11n
Encryption WPA2
3 - Specications
Particle Measure
Particle Channels PM2.5 / PM10
Mass Concentration Range 0-2000µg/m³
Resolution 1µg/m³
CO, Measure
Range 0-9999ppm
Accuracy ±5% or ±75ppm
Resolution 1ppm
HCHO
Range 0.00-5.00mg/m³
Accuracy ±5% F.S
Resolution 0.01mg/m³
TVOC Measure
Range 0.00-9.99mg/m³
Accuracy ±5% F.S
Resolution 0.01mg/m³
Temperature & Humidity Measure
Temperature Range -20-70ºC(-4-158ºF)
Temperature Accuracy ± 2ºC
Temperature Resolution 0.1ºC
Humidity Range 0-100%RH
Humidity Accuracy ±3.5%RH(20-80%RH) ±5%RH(0-
20%RHor 80-100%RH)
Humidity Resolution 0.1%RH
Intelligent Sensor
Noise Detect Sensor A slight noise can awaken device
Wi-Fi
Connection Properties 802.11b, 802.11g, 802.11n on 2.4GHz
Maximum Bit Rate 11Mbps@11b, 54Mbps@11g, 72Mb-
ps@11n
Encryption WPA2

Power
Battery 2400mAh Recharge Li-ion Battey
Work Time Continuous operation about 5 hours
Charging USB 5V/1A
Charging Time About 2 hours when powered o󰀨
Sleep Adjustable Sleep Timer
Others
Display 3 TFT LCD Display, 240*400Pixels
Data Storage 5000 groups of sampling data
Work Temperature 0-50ºC
Storage Temperature -10-60ºC
Size 85*75*155mm
Weight 360g
4 - Function
1 - Machine Function
2 - Key Fuction
Power
Battery 2400mAh Recharge Li-ion Battey
Work Time Continuous operation about 5 hours
Charging USB 5V/1A
Charging Time About 2 hours when powered o󰀨
Sleep Adjustable Sleep Timer
Others
Display 3 TFT LCD Display, 240*400Pixels
Data Storage 5000 groups of sampling data
Work Temperature 0-50ºC
Storage Temperature -10-60ºC
Size 85*75*155mm
Weight 360g
4-Function
1 - Machine Function
2 - Key Fuction

Set/UpKey: Long press to enter/exit the settings screen; Short press
to switch mesurement displaying on screen, or to scroll up in settings/
memory screen.
ON/OFF/ENTER Key: Long press to startup/shutdown; Short press to
enter/exit settings/memory screen.
Memory/Down Key: Long press to enter/exit memory screen; Short
press to switch measurement displaying on screen, or to scroll down in
setting/memory screen.
5 - Power ON/OFF
While o󰀨, Long press ON/OFF/ENTER key until the screen powers on.
While on, Long press ON/OFF/ENTER key until the screen powers o󰀨.
6 - Measure
After startup, the device will keep measuring not stop. Contents of
measure are PM2.5, PM10, CO2, TVOC, HCHO, temperature and
humidity. Device will refresh screen every second and display of PM10,
CO2, TVOC, and HCHO will switch every 15 seconds. You can Short
press ON/OFF/ENTER key to switch display manually. PM2.5, PM10
and CO2 need 3 – 5 seconds warm-up time, TVOC needs 40 seconds
warm-up time. As analog bar shows, air quality has six alarm level. If
air is polluted, device will alarm based and number of measure data
will change color. All alarms are based on real measure data. If Wi-Fi is
enabled, alarm information can be pushed to your mobile phone.
Set/UpKey: Long press to enter/exit the settings screen; Short press
to switch mesurement displaying on screen, or to scroll up in settings/
memory screen.
ON/OFF/ENTER Key: Long press to startup/shutdown; Short press to
enter/exit settings/memory screen.
Memory/Down Key: Long press to enter/exit memory screen; short
press to switch measurement displaying on screen, or to scroll down in
setting/memory screen.
5 - Power ON/OFF
While o󰀨, long press ON/OFF/ENTER key until the screen powers on.
While on, long press ON/OFF/ENTER key until the screen powers o󰀨.
6 - Measure
After startup, the device will keep measuring not stop. Contents of
measure are PM2.5, PM10, CO2, TVOC, HCHO, temperature and
humidity. Device will refresh screen every second and display of PM10,
CO2, TVOC, and HCHO will switch every 15 seconds. You can short
press ON/OFF/ENTER key to switch display manually. PM2.5, PM10
and CO2 need 3 – 5 seconds warm-up time, TVOC needs 40 seconds
warm-up time. As analog bar shows, air quality has six alarm level. If
air is polluted, device will alarm based and number of measure data
will change color. All alarms are based on real measure data. If Wi-Fi is
enabled, alarm information can be pushed to your mobile phone.

7 - Shutdown, Sleep and Awaken
7-1. Shutdown/Sleep
Device can be set to auto power o󰀨 or auto sleep. If there is a long
time without operation, device can auto power o󰀨 or auto sleep to save
on battery consumption. Devices with Wi-Fi can be set to auto sleep,
when sleeping the device will keep uploading measure data.
7-2. Awaken by key
Unit can awake from shutdown status by long press of ON/OFF/
ENTER key. Device with Wi-Fi can awake from sleep status by short
press of any key.
7 - Shutdown, Sleep and Awaken
7-1. Shutdown/Sleep
Device can be set to auto power o󰀨 or auto sleep. If there is a long
time without operation, device can auto power o󰀨 or auto sleep to save
on battery consumption. Devices with Wi-Fi can be set to auto sleep,
when sleeping the device will keep uploading measure data.
7-2. Awaken by key
Unit can awake from shutdown status by long press of ON/OFF/
ENTER key. Device with Wi-Fi can awake from sleep status by short
press of any key.

7-3. Awaken by noise
Noise also can be used to awaken the device. For example, striking a
table can awaken device from sleep mode. Units can awake by noise
within 30 minutes after shutdown.
8 - Memory
On measure screen, Long press MEM/DOWN key to enter/exit mem-
ory screen. Memory screen will dynamically display the latest curve
of measurement data. To view the static measurement data, you can
short press ON/OFF/ENTER key. On static memory screen, the device
will display static curve of measurement data, and you can short press
Up/Down key to view the detail of historical data one by one.
The device can record up to 5000 measurement points to memory,
which contents are PM2.5, PM10 and record time. On the memory
screen, one curve include can contain eight measurement points,
the bright spot for the data point, dark spot for connection, dot for the
current data. You can short press the Up/Down key to see before and
after historical data.
7-3. Awaken by noise
Noise also can be used to awaken the device. For example, striking a
table can awaken device from sleep mode. Units can awake by noise
within 30 minutes after shutdown.
8 - Memory
On measure screen, Long press MEM/DOWN key to enter/exit mem-
ory screen. Memory screen will dynamically display the latest curve
of measurement data. To view the static measurement data, you can
short press ON/OFF/ENTER key. On static memory screen, the device
will display static curve of measurement data, and you can short press
Up/Down key to view the detail of historical data one by one.
The device can record up to 5000 measurement points to memory,
which contents are PM2.5, PM10 and record time. On the memory
screen, one curve include can contain eight measurement points,
the bright spot for the data point, dark spot for connection, dot for the
current data. You can short press the Up/Down key to see before and
after historical data.

9 - Settings
On measure page, long press SET/Up key to enter/exit settings page.
On the settings screen, short press Up/Down key to scroll through
items list and short press ON/OFF/ENTER key to enter the submenu of
item. To exit from submenu, short press ON/OFF/ENTER key to con-
rm all setting items then exit and back to the main menu of settings
screen.
9-1. Time Settings
Unit can be set for the following: Time format (12 hours or 24 hours),
AM/PM, date and time. Short press Up/Down key to change time set-
tings, and short press ON/OFF/ENTER key to conrm, after conrming
all settings, the unit returns to the main menu of settings screen.
9-2. Measure Mode Settings (Models with WiFi)
Device’s measurement can be set to regular measure mode or monitor
measure mode, default is regular measure mode. In regular measure
mode, device will auto power o󰀨. In monitor measure mode, device will
auto sleep but measuring and uploading data will continue.
9-3. Auto Power O󰀨 / Auto Sleep Settings
9 - Settings
On measure page, long press SET/Up key to enter/exit settings page.
On the settings screen, short press Up/Down key to scroll through
items list and short press ON/OFF/ENTER key to enter the submenu of
item. To exit from submenu, short press ON/OFF/ENTER key to con-
rm all setting items then exit and back to the main menu of settings
screen.
9-1. Time Settings
Unit can be set for the following: Time format (12 hours or 24 hours),
AM/PM, date and time. Short press Up/Down key to change time set-
tings, and short press ON/OFF/ENTER key to conrm, after conrming
all settings, the unit returns to the main menu of settings screen.
9-2. Measure Mode Settings (Models with WiFi)
Device’s measurement can be set to regular measure mode or monitor
measure mode, default is regular measure mode. In regular measure
mode, device will auto power o󰀨. In monitor measure mode, device will
auto sleep but measuring and uploading data will continue.
9-3. Auto Power O󰀨 / Auto Sleep Settings

Auto power o󰀨/auto sleep time can be set to 10-120 minute or no auto
power o󰀨/auto sleep. Devices with WiFi can be set to auto power o󰀨
time in regular measure mode or auto sleep time in monitor measure
mode.
9-4.Unit Settings
Unit of temperature can be set to Celsius(°C) or Fahrenheit(°F), default
is Celsius.
9-5. Alarm Settings
Set points for PM2.5 alarm are 10ppm, 35ppm, 75ppm, 150ppm,
200ppm or no alarm, default is 35ppm. If PM2.5 alarm is enable,
device will beep when concentration of PM2.5 is above the set point
alarm. Devices with WiFi will push alarm information to mobile phone.
9-6. Brightness Settings
Screen brightness can be adjusted. There are ve brightness settings
available.
9-7. Noise Sensor Settings
Noise sensor can be set to enable/disable. If enabled, the device can
be awakened from shutdown/sleep status by noise.
9-8. Language Settings
Language can be set to English or Chinese, default is English.
Auto power o󰀨/auto sleep time can be set to 10-120 minute or no auto
power o󰀨/auto sleep. Devices with WiFi can be set to auto power o󰀨
time in regular measure mode or auto sleep time in monitor measure
mode.
9-4.Unit Settings
Unit of temperature can be set to Celsius(°C) or Fahrenheit(°F), default
is Celsius.
9-5. Alarm Settings
Set points for PM2.5 alarm are 10ppm, 35ppm, 75ppm, 150ppm,
200ppm or no alarm, default is 35ppm. If PM2.5 alarm is enable,
device will beep when concentration of PM2.5 is above the set point
alarm. Devices with WiFi will push alarm information to mobile phone.
9-6. Brightness Settings
Screen brightness can be adjusted. There are ve brightness settings
available.
9-7. Noise Sensor Settings
Noise sensor can be set to enable/disable. If enabled, the device can
be awakened from shutdown/sleep status by noise.
9-8. Language Settings
Language can be set to English or Chinese, default is English.

9-10. About Software
View device’s IMEI number, software version and MAC address.
10 - WiFi (Wi-Fi enable devices only)
10-1. First Connect
If not connected to Wi-Fi, a Wi-Fi symbol will ash at the top right
corner on measure screen. Using a mobile phone, use mobile app to
connect device to Wi-Fi network. If device is connected to Wi-Fi net-
work, Wi-Fi symbol will be solid and measure data will upload to mobile
phone. Mobile app can check real-time measure data, historical data
and control the device.
10-2. Has Connected Wi-Fi
If unit has been connected to Wi-Fi, device will automatically reconnect
Wi-Fi after startup. Mobile phone can be used to remotely check the
status of device, for example whether device is measuring or sleeping
or power o󰀨.
10-3. Reconnect Wi-Fi
If Wi-Fi password has changed or you have to change the connec-
tion to another Wi-Fi network, you can reset Wi-Fi connection in the
settings screen and use mobile phone’s APP to reconnect Wi-Fi. The
process of reconnecting is the same as rst connect steps.
10-4. Wi-Fi Function
Device can be remotely monitored by mobile’s APP. Device can be set
up as monitor measuring mode, in this mode the device will not auto
power o󰀨 but will auto sleep. When device is sleeping, data will con-
tinue to upload to the server and device can be awake by mobile APP,
key press or noise sense.
10-5. Product Service
Maintenance or service is not included in this manual, the product must
be repaired by professionals.
9-10. About Software
View device’s IMEI number, software version and MAC address.
10 - WiFi (Wi-Fi enable devices only)
10-1. First Connect
If not connected to Wi-Fi, a Wi-Fi symbol will ash at the top right
corner on measure screen. Using a mobile phone, use mobile app to
connect device to Wi-Fi network. If device is connected to Wi-Fi net-
work, Wi-Fi symbol will be solid and measure data will upload to mobile
phone. Mobile app can check real-time measure data, historical data
and control the device.
10-2. Has Connected Wi-Fi
If unit has been connected to Wi-Fi, device will automatically reconnect
Wi-Fi after startup. Mobile phone can be used to remotely check the
status of device, for example whether device is measuring or sleeping
or power o󰀨.
10-3. Reconnect Wi-Fi
If Wi-Fi password has changed or you have to change the connec-
tion to another Wi-Fi network, you can reset Wi-Fi connection in the
settings screen and use mobile phone’s APP to reconnect Wi-Fi. The
process of reconnecting is the same as rst connect steps.
10-4. Wi-Fi Function
Device can be remotely monitored by mobile’s APP. Device can be set
up as monitor measuring mode, in this mode the device will not auto
power o󰀨 but will auto sleep. When device is sleeping, data will con-
tinue to upload to the server and device can be awake by mobile APP,
key press or noise sense.
10-5. Product Service
Maintenance or service is not included in this manual, the product must
be repaired by professionals.