Partilink HR-11 User manual

HR - 11
HDMI 2.0 Repeater
Usermanual
Partilink Technology Co., Ltd Copyright @2016

www.partilink.com

Partilink Technology Co., Ltd Copyright @2016
-
1
-
Table of Contents
1. Introduction 2
2. Features & Application 3
3. Specifications 4
4. Hardware Description 5
5. Installation 5
6. Package Contents 6

Partilink Technology Co., Ltd Copyright @2016
-
2
-
1. Introduction
HR-11 is a HDMI 2.0 repeater which extends HDMI 2.0
signal of any HDMI cable by regenerating the HDMI
signal up to 15M before it outputs to the HDMI monitor
or projector and it cleans out the digital noise in your
picture. Up to 10 units can be cascaded for longer
extension.
Just connect the repeater with the computer HDMI
graphic port via a HDMI male to male cable to input
HDMI signal and connect with the HDMI display or
projector via a HDMI male to male cable to output
HDMI signal. The repeater is to place near the display
or projector to remove any noise which is generated
with a long HDMI cable.

Partilink Technology Co., Ltd Copyright @2016
-
3
-
2. Features & Application
Apply to improve the video quality when source from
PC, laptop, DVD player and connecting with HDMI
display or projector
HDCP 1.4 and 2.2 compliant
Serial data rate up to 6.0 Gbps, capable of
supporting ultra-high resolution 4K/ 2K @60 Hz
format
Retiming capability allows for clean regenerated
signals for transmission
Adaptive and programmable input equalization
supporting long and short cables
Maintains highest HDMI single link video resolution
4K60 4:4:4
Remove noise generating by long HDMI cable for
better video quality
CEC/ ARC pass through

Partilink Technology Co., Ltd Copyright @2016
-
4
-
3. Specifications
MODEL NO. HR-11
DESCRIPTION HDMI 2.0 Repeater Box
INPUT INTERFACE HDMI x 1
Resolution 3840 x 2160/ 4096 x 2160 @60Hz 4:4:4
OUTPUT INTERFACE
HDMI x 1
Resolution 3840 x 2160/ 4096 x 2160 @60Hz 4:4:4
VIDEO BANDWIDTH
18 Gbps
HDCP VERSION 1.4 and 2.2 Compliant
LED INDICATOR LED x 1, Green, Red and Orange for Status Indication
AUDIO Digital Audio Output over HDMI
POWER
Power Supply DC5V
Power Consumption 1W (max.)
Power Jack Φ1.3mm
ENVIRONMENT Operating Temperature 0~45℃
Operating Humidity 20~90%
Storage Temperature -20~60℃
DIMENSION 43 x 81 x 22.9 mm (W x L x H)
** Product specifications are subject to change without notice.

Partilink Technology Co., Ltd Copyright @2016
-
5
-
4. Hardware Description
■HR-11
5. Installation
Connect the source to the HDMI input port of repeater
with a HDMI 2.0 male to male cable and connect the
HDMI 2.0 display or projector to the HDMI output port
of repeater with a HDMI 2.0 male to male cable.
Connect the 5V DC power supply to the power input
port of the HDMI 2.0 repeater. *Please NOTE the
repeater can also consume the power from the
source device without external power supply when
extension without cascade mode, but it still base on
the installation environment if the power from the
source device sufficient or not.
LED indicator: The LED colors indicate the installation
and activated status. The LED is red when power on;
HDMI input
HDMI output
LED Indicator
5V DC
power input

Partilink Technology Co., Ltd Copyright @2016
-
6
-
the LED is green when the cables are connected
securely; the LED is orange when both power on and
cables connected and activated.
 Up to 15m HDMI male to male cable connected to the
input port and up to 10 units of the repeater can be
cascaded for longer extension. *Please NOTE: The
repeater can also consume the power from the
source device without external power supply when
extension without cascade mode, but it still depends if
the power from the source device sufficient or not in
the installation site.
6.Package Content
1. HR-11 HDMI 2.0 repeater (1)
2. 5VDC power supply (1)
3. User manual (1)