CONNECTION DIAGRAM
WOR ING
VIDEO IN MOTION allows the video in motion.
This operation can be done or inserting the backgear (canb s code) or:
1. Every time that the ORANGE wire is connected to a 12 volt, the video is open, for example
by connecting the wire to the backgear positive wire the video is open each time we will
insert the backgear.
This wire must be connected only when the backgear information it is not available in
the canbus net.
2. Every time that the BLUE wire is connected to a 12 volt, the video is open only after the
VOLUMES seq ence (on the steering wheel) it’s carried o t, the seq ence is VOLUME +,
VOLUME —, VOLUME +, VOLUME —, so by connecting the wire to the backgear positive
wire the video is open each time we will insert the backgear and we make the seq ence.
If the steering wheel doesn’t have the seq ence can be made with the LIGHT knob,
LIGHT ON, LIGHT OFF, LIGHT ON, LIGHT OFF.
Video abilitationis disactivated as soon as the 12V polarity on BLUE or ORANGE wire is lost or if we
se only the BLUE wire, each time we manage the VIDEO IN MOTION proced re.
The LED of the module is ORANGE when the ignition is ON.
When the VIDEO is open the LED became GREEN.
CONNECT TO A + 12V PERMANENT
CONNECT TO A GND
CONNECTED TO A + 12V TO OPEN THE VIDEO
CONNECTED TO A + 12V TO OPEN THE VIDEO
AFTER THE VOLUME SEQUENCE (+ - + -)
CONNECT TO CAN H WIRE FROM THE CAR
CONNECT TO CAN H WIRE TOWARD THE RADIO
CONNECT TO CAN L WIRE FROM THE CAR
CONNECT TO CAN L WIRE TOWARD THE RADIO
+ 12 V IGNITION OUTPUT
CONNECTION DIAGRAM
WOR ING
VIDEO IN MOTION allows the video in motion.
This operation can be done or inserting the backgear (canb s code) or:
1. Every time that the ORANGE wire is connected to a 12 volt, the video is open, for example
by connecting the wire to the backgear positive wire the video is open each time we will
insert the backgear.
This wire must be connected only when the backgear information it is not available in
the canbus net.
2. Every time that the BLUE wire is connected to a 12 volt, the video is open only after the
VOLUMES seq ence (on the steering wheel) it’s carried o t, the seq ence is VOLUME +,
VOLUME —, VOLUME +, VOLUME —, so by connecting the wire to the backgear positive
wire the video is open each time we will insert the backgear and we make the seq ence.
If the steering wheel doesn’t have the seq ence can be made with the LIGHT knob,
LIGHT ON, LIGHT OFF, LIGHT ON, LIGHT OFF.
Video abilitationis disactivated as soon as the 12V polarity on BLUE or ORANGE wire is lost or if we
se only the BLUE wire, each time we manage the VIDEO IN MOTION proced re.
The LED of the module is ORANGE when the ignition is ON.
When the VIDEO is open the LED became GREEN.
CONNECT TO A + 12V PERMANENT
CONNECT TO A GND
CONNECTED TO A + 12V TO OPEN THE VIDEO
CONNECTED TO A + 12V TO OPEN THE VIDEO
AFTER THE VOLUME SEQUENCE (+ - + -)
CONNECT TO CAN H WIRE FROM THE CAR
CONNECT TO CAN H WIRE TOWARD THE RADIO
CONNECT TO CAN L WIRE FROM THE CAR
CONNECT TO CAN L WIRE TOWARD THE RADIO
+ 12 V IGNITION OUTPUT
