Patriot Lighting FL2153 User manual

PACKAGE CONTENTS
SAFETY INFORMATION
SKU Number: 347-2422
Model Number: FL2153
CRAIGORY LED FLOOR LAMP
Questions, problems, missing parts?
For customer service support and the fastest response, please email us at
[email protected]
Before returning to your retailer, call our customer service at 1-888-722-5089
Please Before beginning operation of product, make sure all parts are present. If any part is missing or damaged,
do not attempt to install or operate the product. Contact customer service for replacement parts.
REMINDER: You must use the parts provided for proper installation and safety.
To reduce the risk of fire, electric shock or injury
1. Do not try to alter the plug.
2. Do not use with an extension cord.
3. Do not look directly at the LED light to avoid damage to eyes.
4. Do not cover the product with a cloth, paper, or easily flammable material.
5. Do not place your hands on the LED light, as this will become hot when in use.
6. Unplug the adapter if not in use for a long period of time.
7. Place on a stable surface.
8. Please use only indoors.
9. If light is off or flickering, please check if adapter and DC connection socket is secured.
It can be a Desk Lamp
or Clamp-on Lamp
Hardware Contents Note:
Hardware not shown actual size.
AA. Adapter X 1 BB. Remote Control
X 1
Problem: Light does not come on.
1. Make sure the switch and power supply are on.
2. Check to be sure lamp is plugged in.
FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails due
to a defect in material and workmanship within five years from the date of original purchase, simply bring this lighting
fixture with the original sales receipt back to your nearest MENARDS store. At its discretion, PATRIOT LIGHTING
agrees to have the product or any defective part(s) repaired or replaced with the same or similar PATRIOT LIGHTING
product or part free of charge, within the stated warranty period, when returned by the original purchaser with original
sales receipt. This warranty; (1) excludes expendable parts including but not limited to light bulbs; (2) does not cover
damage that has resulted from abuse or misuse; and (3) does not cover any losses, labor, injuries to persons/property
or costs. This warranty does give you specific legal rights and you may have other rights, which vary from state to state.
R
RR
R
Ensure the Lamp is unplugged before cleaning
1. Use a damp cloth to clean the unit.
2. Do not use detergent or abrasives for cleaning.
3. Do not immerse the unit in water.
CARE AND MAINTENANCE
TROUBLESHOOTING

ASSEMBLY INSTRUCTIONS
1. Screw one lamp pole (C) tightly into the lamp base (A) .
2. Screw another lamp pole (C) tightly into the lamp pole (C).
3. Screw lamp head (B) tightly into the middle lamp pole (C).
B
C
C
A
Power
Color
Bright
Gooseneck
Screw lamp head (B) tightly into lamp base (C).
B
Unwind the clamp to the desired width,
place over a hard surface and tighten.
Screw lamp head (B) tightly into lamp clamp (D).
B
A
D
Instructions for Use
1. Plug the adaptor (AA) into a electrical outlet. Plug the adaptor into the lamp power jack.
2. To turn on the light, gently touch “Power” switch.
3. There are five color temperatures, gently touch “Color” button to adjust the color temperatures.
4. There are five brightness levels, gently touch “Bright” button to adjust the brightness.
5. To adjust the lamp direction by Gooseneck.
10-minute timer indicator
60-second timer indicator
ON/OFF switch
Color temperature button
Brightness button
AA
ON
60S 10M
Bright +
Color -
Bright -
Color +
20% 100%50%
Warm Cool
Mix
ON : ON/OFF switch
60S : 60 seconds timer
10M : 10 minutes timer
Bright + : increase brightness
Bright - : decrease brightness
Color + : increase color temperature
Color - : decrease color temperature
: Night light mode
20% : 20% brightness
50% : 50% brightness
100% : 100% brightness
Warm : Warm color temperature
Cool : Cool color temperature
Mix : Mixing color temperature
Remote control (BB) introduction: require 2 x AAA batteries ( not included )