Patriot Pro-Series User manual

OWNER’S &
OPERATOR’S
MANUAL
❧
P
PR RO O
-SERIES
-SERIES
CSV’S WITH GAS ENGINES
CSV’S WITH GAS ENGINES

REAR VIEW
The circled numbers here refer to the
numbers in the first column of the parts
list.
42
45
43
1
44
19
6
7
8
8B
5
4
5
9C
5
9
6
37
5
7
637
8
8B
5
9
9C
5
37
15
3
Several patents approved or pending.
page 18
CAUTION: THE ROTOR WILL COAST
EVEN AFTER THE ENGINE IS OFF. MAKE
SURE THE ROTOR IS FULLY STOPPED
AND DISCONNECT THE SPARK PLUG
WIRE BEFORE ATTEMPTING ANY
MAINTENANCE OR SERVICE. IF THE
ROTOR IS STILL TURNING, IT
MAY CAUSE SERIOUS PERSONAL
INJURY.
▲
!
37

FRONT VIEW
The circled numbers here refer to
the first column of numbers in the
parts list.
34
18
41
15
31
32
31 33 (washers)
(screws)
24
46
38
1
40
20230
2922
(screws)
(washers)
25
1026
(screws)
12
30
36
30
13
21
39A
39B
27
30
28 21
14
17
41
32
31
30
33
32
(washers)
(screws)
35
16
30 23
411 3
33
31
Several patents approved or pending.
page 19
CAUTION: THE ROTOR WILL COAST
EVEN AFTER THE ENGINE IS OFF. MAKE
SURE THE ROTOR IS FULLY STOPPED
AND DISCONNECT THE SPARK PLUG
WIRE BEFORE ATTEMPTING ANY
MAINTENANCE OR SERVICE. IF THE
ROTOR IS STILL TURNING, IT
MAY CAUSE SERIOUS PERSONAL
INJURY.
▲
!

Detail of the outboard bearing assembly.
The bearing is sealed and does not need
lubrication.
Both the shredder hopper and the chipper cone are
assembled with the same hardware and wrench.
21
39A
39B
30
32 Screws (inside)
33 Washers (inside)
31 Nuts (outside)
Detail of the shredder hopper.
32
33
31
27 29
page 20
set
screw
lock
collar
bearing
CAUTION: THE ROTOR WILL COAST
EVEN AFTER THE ENGINE IS OFF. MAKE
SURE THE ROTOR STOPS TURNING,
THEN DISCONNECT THE PLUG
WIRE FROM THE ENGINE BEFORE
ATTEMPTING ANY MAINTENANCE OR
CLEAN-OUT. IF THE ROTOR IS STILL
TURNING, IT MAY CAUSE SERIOUS
PERSONAL INJURY.
▲
!
32 Screw
33 Washer
31 Nut