paws & pals DELUXE PET STROLLER User manual
PET STROLLER
For accurate structure and to avoid injury to yourself, your pet or your home please read
care guides, books and research quality care outside of these instruction manuals. Contact
a pet professional with any additional care questions.
For questions and inquiries please contact our customer service email:
• FOR PETS ONLY
• Not intended to be used as a restaining device for agressive or
dangerous animals that dig, chew or paw aggresively.
• Do not leave your pet unattended.
• Pet gear is not liable for any damage caused by aggresive,
destructive, immature or untrained animals.
Do not use near an open or exposed flame.
• Failure to follow these warnings and the instructions could result
in serious injury or death.
• Always apply the brake whenever the stroller is stationary.
• Do not overload as stroller may become unstable; maximum
weight capacity of pet using is 33 pounds.
• This stroller is designed for one pet only.
• Before making adjustments to stroller ensure that pet’s body is
clear of any moving parts.
• Do not hang bags from handles as this may cause the product to
become unstable.
• Do not use on escalator or stairs; fold stroller and carry.
• Ensure stroller is completely erected and check that all locks are
engaged before placing pet in stroller.
PAWS & PALS ©
LOS ANGELES, CA
213-986-8562
PAWSANDPALS.COM
DELUXE
INSIDE
COMPONENT INCLUDES
• HANDLE
• CUP HOLDER
• CANOPY
• STORAGE BASKET
• FOOT BOARD
• REAR WHEEL
• FRONT WHEEL
CLEANING AND MAINTENANCE
• UNSNAP BUTTON ON STROLLER
• TAKE APART THE CATNOPY
• REMOVE THE CUSHION
• WIPE STROLLERS GENTLY
1. OPENING THE STROLLER: RELEASE THE
FOLDING HOOK, LIFT THE HANDLEBAR, UNFOLD
THE STROLLER AND LOCK IN BOTH JOINTS.
2. INSTALLING THE FRONT WHEEL: FIX THE
WHEEL AXLE POSITION AT U TUBE GROOVE AND
ATTACH HOOK-SHAPED GASKET. TIGHTEN THE
NUTS ON BOTH SIDES. MAKE SURE THE GASKET
IS TIGHTENED BY THE TWO NUTS.
3. INSTALLING THE REAR WHEEL: INSERT THE
AIDED TOOTH ONTO THE AXLE, THEN , ATTACH
THE WHEEL AND, GASKET. INSERT THE CLIP PIN
THROUGH THE HOLE ON THE AXLE, THEN COVER
THE WHEEL CAP.
4. ATTACH THE FOOTBOARD TO THE BOTTOM OF
THE STROLLER AND TIGHTEN THE SCREWS.
5. AIM AT THE STAKE ON THE HANDLE TUBE AND
AFFIX THE CUP HOLDER.
6. TO STEP THE BRAKE POLE DOWN TO STOP THE
STROLLER, AND LIFT IT UP TO RELEASE THE
BRAKE.
7. FASTEN THE SAFETY LEASE WITH THE PET
COLLAR.
8. UNZIP THE MESH TO OPEN THE WINDOW.
9. FOLDING THE STROLLER: UNZIP THE CANOPY
WINDOW, THEN PRESS THE FOLDING BUTTON AS
ARROW DIRECTION TO FOLD THE STROLLER AND
FASTEN THE FOLDING HOOK.
