PAX Aries8 User manual
This document is provided to you for informational purposes
only. All features and specifications are subject to change
without notice. PAX’s name and PAX’s logo are registered
trademarks of PAX Technology Inc. All rights reserved.
The
Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
PAX Technology, Inc. is under license. Other trademarks and
trade names are those of their respective owners.
P/N:200312000000542
PAX TECHNOLOGY INC.
Aries8 Smart Tablet
PAX TECHNOLOGY INC.
Note: Product images shown may be different than actual
product received.
Quick Setup Guide
PAX TECHNOLOGY INC.
Box Contents
Box Contents
• 1 – Aries8 Smart Tablet
• 1 – Power Adapter
• 1 – USB Cable
• 1 – SIM Card Ejector Tool
• 1 –
• 1 – Quick Start Guide
Privacy Shield + Plastic Case
Product Description
Product Description
Power Adapter
USB Cable
SIM Card Ejector Tool
Charging Indicator Light Sensor
LCD
Contactless Card
Tap Area
RF Indicator 8-MP Camera
Keypad
Front View
Left Side View Right Side View
Speaker
Audio Jack
USB
Volume+
Volume-
SIM+Micro SD
SIM/PSAM
PSAM
Bottom View
Magnetic Card/IC Card Slot
Power Button
Top View
Underside View
Micro SD
Privacy Shield+Plastic Case
Privacy Shield
Card Slot Locations
SIM
Insert PSAM
card into slot
Insert SIM or
PSAM card
into slot
Insert Micro SD and/or
SIM card into tray
Responsible Party:
PAX Technology, Inc.
8880 Freedom Crossing Trail
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk
1-877-859-0099
www.pax.us
Note: Power adapter may vary.
This document is provided to you for informational purposes
only. All features and specifications are subject to change
without notice. PAX’s name and PAX’s logo are registered
trademarks of PAX Technology Inc. All rights reserved.
The
Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
PAX Technology, Inc. is under license. Other trademarks and
trade names are those of their respective owners.
P/N:200312000000542
PAX TECHNOLOGY INC.
Aries8 Smart Tablet
PAX TECHNOLOGY INC.
Note: Product images shown may be different than actual
product received.
Quick Setup Guide
PAX TECHNOLOGY INC.
Box Contents
Box Contents
• 1 – Aries8 Smart Tablet
• 1 – Power Adapter
• 1 – USB Cable
• 1 – SIM Card Ejector Tool
• 1 –
• 1 – Quick Start Guide
Privacy Shield + Plastic Case
Product Description
Product Description
Power Adapter
USB Cable
SIM Card Ejector Tool
Charging Indicator Light Sensor
LCD
Contactless Card
Tap Area
RF Indicator 8-MP Camera
Keypad
Front View
Left Side View Right Side View
Speaker
Audio Jack
USB
Volume+
Volume-
SIM+Micro SD
SIM/PSAM
PSAM
Bottom View
Magnetic Card/IC Card Slot
Power Button
Top View
Underside View
Micro SD
Privacy Shield+Plastic Case
Privacy Shield
Card Slot Locations
SIM
Insert PSAM
card into slot
Insert SIM or
PSAM card
into slot
Insert Micro SD and/or
SIM card into tray
Responsible Party:
PAX Technology, Inc.
8880 Freedom Crossing Trail
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk
1-877-859-0099
www.pax.us
Note: Power adapter may vary.
This document is provided to you for informational purposes
only. All features and specifications are subject to change
without notice. PAX’s name and PAX’s logo are registered
trademarks of PAX Technology Inc. All rights reserved.
The
Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
PAX Technology, Inc. is under license. Other trademarks and
trade names are those of their respective owners.
P/N:200312000000542
PAX TECHNOLOGY INC.
Aries8 Smart Tablet
PAX TECHNOLOGY INC.
Note: Product images shown may be different than actual
product received.
Quick Setup Guide
PAX TECHNOLOGY INC.
Box Contents
Box Contents
• 1 – Aries8 Smart Tablet
• 1 – Power Adapter
• 1 – USB Cable
• 1 – SIM Card Ejector Tool
• 1 –
• 1 – Quick Start Guide
Privacy Shield + Plastic Case
Product Description
Product Description
Power Adapter
USB Cable
SIM Card Ejector Tool
Charging Indicator Light Sensor
LCD
Contactless Card
Tap Area
RF Indicator 8-MP Camera
Keypad
Front View
Left Side View Right Side View
Speaker
Audio Jack
USB
Volume+
Volume-
SIM+Micro SD
SIM/PSAM
PSAM
Bottom View
Magnetic Card/IC Card Slot
Power Button
Top View
Underside View
Micro SD
Privacy Shield+Plastic Case
Privacy Shield
Card Slot Locations
SIM
Insert PSAM
card into slot
Insert SIM or
PSAM card
into slot
Insert Micro SD and/or
SIM card into tray
Responsible Party:
PAX Technology, Inc.
8880 Freedom Crossing Trail
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk
1-877-859-0099
www.pax.us
Note: Power adapter may vary.
This document is provided to you for informational purposes
only. All features and specifications are subject to change
without notice. PAX’s name and PAX’s logo are registered
trademarks of PAX Technology Inc. All rights reserved.
The
Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
PAX Technology, Inc. is under license. Other trademarks and
trade names are those of their respective owners.
P/N:200312000000542
PAX TECHNOLOGY INC.
Aries8 Smart Tablet
PAX TECHNOLOGY INC.
Note: Product images shown may be different than actual
product received.
Quick Setup Guide
PAX TECHNOLOGY INC.
Box Contents
Box Contents
• 1 – Aries8 Smart Tablet
• 1 – Power Adapter
• 1 – USB Cable
• 1 – SIM Card Ejector Tool
• 1 –
• 1 – Quick Start Guide
Privacy Shield + Plastic Case
Product Description
Product Description
Power Adapter
USB Cable
SIM Card Ejector Tool
Charging Indicator Light Sensor
LCD
Contactless Card
Tap Area
RF Indicator 8-MP Camera
Keypad
Front View
Left Side View Right Side View
Speaker
Audio Jack
USB
Volume+
Volume-
SIM+Micro SD
SIM/PSAM
PSAM
Bottom View
Magnetic Card/IC Card Slot
Power Button
Top View
Underside View
Micro SD
Privacy Shield+Plastic Case
Privacy Shield
Card Slot Locations
SIM
Insert PSAM
card into slot
Insert SIM or
PSAM card
into slot
Insert Micro SD and/or
SIM card into tray
Responsible Party:
PAX Technology, Inc.
8880 Freedom Crossing Trail
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk
1-877-859-0099
www.pax.us
Note: Power adapter may vary.
This document is provided to you for informational purposes
only. All features and specifications are subject to change
without notice. PAX’s name and PAX’s logo are registered
trademarks of PAX Technology Inc. All rights reserved.
The
Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
PAX Technology, Inc. is under license. Other trademarks and
trade names are those of their respective owners.
P/N:200312000000542
PAX TECHNOLOGY INC.
Aries8 Smart Tablet
PAX TECHNOLOGY INC.
Note: Product images shown may be different than actual
product received.
Quick Setup Guide
PAX TECHNOLOGY INC.
Box Contents
Box Contents
• 1 – Aries8 Smart Tablet
• 1 – Power Adapter
• 1 – USB Cable
• 1 – SIM Card Ejector Tool
• 1 –
• 1 – Quick Start Guide
Privacy Shield + Plastic Case
Product Description
Product Description
Power Adapter
USB Cable
SIM Card Ejector Tool
Charging Indicator Light Sensor
LCD
Contactless Card
Tap Area
RF Indicator 8-MP Camera
Keypad
Front View
Left Side View Right Side View
Speaker
Audio Jack
USB
Volume+
Volume-
SIM+Micro SD
SIM/PSAM
PSAM
Bottom View
Magnetic Card/IC Card Slot
Power Button
Top View
Underside View
Micro SD
Privacy Shield+Plastic Case
Privacy Shield
Card Slot Locations
SIM
Insert PSAM
card into slot
Insert SIM or
PSAM card
into slot
Insert Micro SD and/or
SIM card into tray
Responsible Party:
PAX Technology, Inc.
8880 Freedom Crossing Trail
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk
1-877-859-0099
www.pax.us
Note: Power adapter may vary.
PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
910
PAX TECHNOLOGY INC.
1. To insert card, open card slot cover and insert card
with chip facing up (see page 4). Close card slot cover.
2. To remove card, first push it further into slot. (The card will
then stick out of the slot a little.) Next, push card again to remove
it.
5
6
1. Open tray cover and insert SIM card ejector tool into hole at side
of card tray until tray opens.
2. Take tray out and put the SIM/Micro SD card on the tray in the
direction shown in page 4.
3. Gently push tray back into slot until firmly seated.
Operating System: Android 7.1
CPU: Quad-Core Cortex A53, 1.4GHz
Memory:
1 GB RAM + 8GB Flash
Display: 8-inch, Resolution 800 x 1280 pixels, multi-touch
capacitive screen, supports stylus pen
Audio: Built-in speaker, supports headphone output
Camera: Front camera, 8-mega pixels with flash, auto
focus, high-speed code scanning
Light sensor: Main display automatically adjusts backlight
brightness
Wireless communication: Supports Wi-Fi,
Bluetooth
® wireless
technology, 3G/4G Positioning: Support GPS, Compass, GlONASS
Card slots: SIM/SD 2-in-1 card slot
SIM/PSAM card slot
Micro SD card slot (supports maximum of 128GB)
Magnetic stripe card/IC card slot, 2-in-1,
supports MAG&ICC
Magnetic card reader: Supports Track 1/2/3
IC card reader: Complies with ISO7816 standards, EMV2000 L1
& L2, PBOC3.0
Contactless card reader: Compatible with ISO 14443 Type A&B
Specifications
Specifications
8
Device Location
9
Device Location
Cleaning the Device
1 0
Cleaning the Device
Locate the device on a counter top, desktop or table top. Keep
the device away from direct sunlight, excessive dust, moisture,
and heat. Avoid locating the device near electrical devices that
might introduce interference such as microwave ovens and blow
dryers.
WARNING:
Do not use industrial strength or abrasive cleaner as it may
damage or scratch the screen.
• Do not immerse tablet in water (or liquid).
• Do not spray water or cleaner into card reader or ports.
• To clean screen, apply distilled water or mild glass cleaner onto
a soft, lint-free cloth and gently wipe screen.
• To clean tablet, apply distilled water or plastic-safe cleaner onto
a soft, lint-free cloth and gently wipe tablet.
Installation and Usage TipsInstallation and Usage Tips
11
• Base functionality is not available while the device is connected
to a computer or when it is being charged using a Type C plug.
•Use the included USB cable with power adapter to charge the
device, otherwise the device may not operate normally.
• Avoid exposing the device to an excessively hot, humid, dusty,
or strong electromagnetic environment.
• Do not vibrate, shake, or drop the device.
• Do not insert or unplug any part of the device while it is
powered on. This may cause damage to an internal circuit.
• Please contact PAX technical support for assistance with the
device.
• Before using magnetic stripe card/IC / contactless card, check
if there is any suspicious person nearby, if so, let the relevant
personnel know.
Caution: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment. In a domestic environment,
this product may cause radio interference in which case the user
may be required to take adequate measures.
Power on: Press and hold the power button for three seconds
until screen display lights up and tablet powers up.
See page 3 (Top View) for the location of the power button.
Power off: Press and hold the power button for three seconds.
Select “Power off”.
Charge: Plug USB cable into USB port (see page 2, Left Side
View for the location of the USB port) or place the tablet onto its
base to charge the tablet.
Charging indicator: Charging indicator light displays charging
status:
• Red indicator – Tablet is charging.
• Green indicator – Charging is complete.
• Red and green indicators flashing alternately – Charging problem.
(See page 2 for the location of the Charging indicator.)
Power
Power
Card Readers
Card Readers
4
Magnetic stripe card: Insert magnetic stripe card into card slot
and push to the end with magnetic stripe facing down, then pull out
card at a constant speed to swipe card.
Smart card: Insert card with IC chip facing up, then push it to the
end of the card slot. Leave card inserted until prompted to remove.
Contactless card: When prompted, hold contactless card over
center of contactless logo area.
Privacy Shield
7
Privacy Shield
Caution: While the installation of a privacy shield is not required,
they do offer additional protection.
Please Note: Once installed, the higher privacy shield will be fixed
and cannot be removed, while the lower privacy shield can be
removed.
1. Align the four pegs on the privacy shield with the four mounting
slots around the keypad.
2. Press the privacy shield firmly to secure it into place.
Privacy Shield Mounting Slots
Mounting Slots
High Privacy ShieldLow Privacy Shield
Working Environment:
Operating temperature：0℃～50℃；
Relative humidity：5%～96%(Non-condensing)
Storage Environment:
Storage temperature：-20℃～70℃；
Relative humidity：5%～96% (Non-condensing)
Power Adapter: Input: 100‐240VAC, 50Hz/60Hz
Output: 5V/2A
SIM/PSAM Card Slots
SIM/PSAM Card Slots
SIM/Micro SD Card Tray
SIM/Micro SD Card Tray
PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
910
PAX TECHNOLOGY INC.
1. To insert card, open card slot cover and insert card
with chip facing up (see page 4). Close card slot cover.
2. To remove card, first push it further into slot. (The card will
then stick out of the slot a little.) Next, push card again to remove
it.
5
6
1. Open tray cover and insert SIM card ejector tool into hole at side
of card tray until tray opens.
2. Take tray out and put the SIM/Micro SD card on the tray in the
direction shown in page 4.
3. Gently push tray back into slot until firmly seated.
Operating System: Android 7.1
CPU: Quad-Core Cortex A53, 1.4GHz
Memory:
1 GB RAM + 8GB Flash
Display: 8-inch, Resolution 800 x 1280 pixels, multi-touch
capacitive screen, supports stylus pen
Audio: Built-in speaker, supports headphone output
Camera: Front camera, 8-mega pixels with flash, auto
focus, high-speed code scanning
Light sensor: Main display automatically adjusts backlight
brightness
Wireless communication: Supports Wi-Fi,
Bluetooth
® wireless
technology, 3G/4G Positioning: Support GPS, Compass, GlONASS
Card slots: SIM/SD 2-in-1 card slot
SIM/PSAM card slot
Micro SD card slot (supports maximum of 128GB)
Magnetic stripe card/IC card slot, 2-in-1,
supports MAG&ICC
Magnetic card reader: Supports Track 1/2/3
IC card reader: Complies with ISO7816 standards, EMV2000 L1
& L2, PBOC3.0
Contactless card reader: Compatible with ISO 14443 Type A&B
Specifications
Specifications
8
Device Location
9
Device Location
Cleaning the Device
1 0
Cleaning the Device
Locate the device on a counter top, desktop or table top. Keep
the device away from direct sunlight, excessive dust, moisture,
and heat. Avoid locating the device near electrical devices that
might introduce interference such as microwave ovens and blow
dryers.
WARNING:
Do not use industrial strength or abrasive cleaner as it may
damage or scratch the screen.
• Do not immerse tablet in water (or liquid).
• Do not spray water or cleaner into card reader or ports.
• To clean screen, apply distilled water or mild glass cleaner onto
a soft, lint-free cloth and gently wipe screen.
• To clean tablet, apply distilled water or plastic-safe cleaner onto
a soft, lint-free cloth and gently wipe tablet.
Installation and Usage TipsInstallation and Usage Tips
11
• Base functionality is not available while the device is connected
to a computer or when it is being charged using a Type C plug.
•Use the included USB cable with power adapter to charge the
device, otherwise the device may not operate normally.
• Avoid exposing the device to an excessively hot, humid, dusty,
or strong electromagnetic environment.
• Do not vibrate, shake, or drop the device.
• Do not insert or unplug any part of the device while it is
powered on. This may cause damage to an internal circuit.
• Please contact PAX technical support for assistance with the
device.
• Before using magnetic stripe card/IC / contactless card, check
if there is any suspicious person nearby, if so, let the relevant
personnel know.
Caution: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment. In a domestic environment,
this product may cause radio interference in which case the user
may be required to take adequate measures.
Power on: Press and hold the power button for three seconds
until screen display lights up and tablet powers up.
See page 3 (Top View) for the location of the power button.
Power off: Press and hold the power button for three seconds.
Select “Power off”.
Charge: Plug USB cable into USB port (see page 2, Left Side
View for the location of the USB port) or place the tablet onto its
base to charge the tablet.
Charging indicator: Charging indicator light displays charging
status:
• Red indicator – Tablet is charging.
• Green indicator – Charging is complete.
• Red and green indicators flashing alternately – Charging problem.
(See page 2 for the location of the Charging indicator.)
Power
Power
Card Readers
Card Readers
4
Magnetic stripe card: Insert magnetic stripe card into card slot
and push to the end with magnetic stripe facing down, then pull out
card at a constant speed to swipe card.
Smart card: Insert card with IC chip facing up, then push it to the
end of the card slot. Leave card inserted until prompted to remove.
Contactless card: When prompted, hold contactless card over
center of contactless logo area.
Privacy Shield
7
Privacy Shield
Caution: While the installation of a privacy shield is not required,
they do offer additional protection.
Please Note: Once installed, the higher privacy shield will be fixed
and cannot be removed, while the lower privacy shield can be
removed.
1. Align the four pegs on the privacy shield with the four mounting
slots around the keypad.
2. Press the privacy shield firmly to secure it into place.
Privacy Shield Mounting Slots
Mounting Slots
High Privacy ShieldLow Privacy Shield
Working Environment:
Operating temperature：0℃～50℃；
Relative humidity：5%～96%(Non-condensing)
Storage Environment:
Storage temperature：-20℃～70℃；
Relative humidity：5%～96% (Non-condensing)
Power Adapter: Input: 100‐240VAC, 50Hz/60Hz
Output: 5V/2A
SIM/PSAM Card Slots
SIM/PSAM Card Slots
SIM/Micro SD Card Tray
SIM/Micro SD Card Tray
PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
910
PAX TECHNOLOGY INC.
1. To insert card, open card slot cover and insert card
with chip facing up (see page 4). Close card slot cover.
2. To remove card, first push it further into slot. (The card will
then stick out of the slot a little.) Next, push card again to remove
it.
5
6
1. Open tray cover and insert SIM card ejector tool into hole at side
of card tray until tray opens.
2. Take tray out and put the SIM/Micro SD card on the tray in the
direction shown in page 4.
3. Gently push tray back into slot until firmly seated.
Operating System: Android 7.1
CPU: Quad-Core Cortex A53, 1.4GHz
Memory:
1 GB RAM + 8GB Flash
Display: 8-inch, Resolution 800 x 1280 pixels, multi-touch
capacitive screen, supports stylus pen
Audio: Built-in speaker, supports headphone output
Camera: Front camera, 8-mega pixels with flash, auto
focus, high-speed code scanning
Light sensor: Main display automatically adjusts backlight
brightness
Wireless communication: Supports Wi-Fi,
Bluetooth
® wireless
technology, 3G/4G Positioning: Support GPS, Compass, GlONASS
Card slots: SIM/SD 2-in-1 card slot
SIM/PSAM card slot
Micro SD card slot (supports maximum of 128GB)
Magnetic stripe card/IC card slot, 2-in-1,
supports MAG&ICC
Magnetic card reader: Supports Track 1/2/3
IC card reader: Complies with ISO7816 standards, EMV2000 L1
& L2, PBOC3.0
Contactless card reader: Compatible with ISO 14443 Type A&B
Specifications
Specifications
8
Device Location
9
Device Location
Cleaning the Device
1 0
Cleaning the Device
Locate the device on a counter top, desktop or table top. Keep
the device away from direct sunlight, excessive dust, moisture,
and heat. Avoid locating the device near electrical devices that
might introduce interference such as microwave ovens and blow
dryers.
WARNING:
Do not use industrial strength or abrasive cleaner as it may
damage or scratch the screen.
• Do not immerse tablet in water (or liquid).
• Do not spray water or cleaner into card reader or ports.
• To clean screen, apply distilled water or mild glass cleaner onto
a soft, lint-free cloth and gently wipe screen.
• To clean tablet, apply distilled water or plastic-safe cleaner onto
a soft, lint-free cloth and gently wipe tablet.
Installation and Usage TipsInstallation and Usage Tips
11
• Base functionality is not available while the device is connected
to a computer or when it is being charged using a Type C plug.
•Use the included USB cable with power adapter to charge the
device, otherwise the device may not operate normally.
• Avoid exposing the device to an excessively hot, humid, dusty,
or strong electromagnetic environment.
• Do not vibrate, shake, or drop the device.
• Do not insert or unplug any part of the device while it is
powered on. This may cause damage to an internal circuit.
• Please contact PAX technical support for assistance with the
device.
• Before using magnetic stripe card/IC / contactless card, check
if there is any suspicious person nearby, if so, let the relevant
personnel know.
Caution: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment. In a domestic environment,
this product may cause radio interference in which case the user
may be required to take adequate measures.
Power on: Press and hold the power button for three seconds
until screen display lights up and tablet powers up.
See page 3 (Top View) for the location of the power button.
Power off: Press and hold the power button for three seconds.
Select “Power off”.
Charge: Plug USB cable into USB port (see page 2, Left Side
View for the location of the USB port) or place the tablet onto its
base to charge the tablet.
Charging indicator: Charging indicator light displays charging
status:
• Red indicator – Tablet is charging.
• Green indicator – Charging is complete.
• Red and green indicators flashing alternately – Charging problem.
(See page 2 for the location of the Charging indicator.)
Power
Power
Card Readers
Card Readers
4
Magnetic stripe card: Insert magnetic stripe card into card slot
and push to the end with magnetic stripe facing down, then pull out
card at a constant speed to swipe card.
Smart card: Insert card with IC chip facing up, then push it to the
end of the card slot. Leave card inserted until prompted to remove.
Contactless card: When prompted, hold contactless card over
center of contactless logo area.
Privacy Shield
7
Privacy Shield
Caution: While the installation of a privacy shield is not required,
they do offer additional protection.
Please Note: Once installed, the higher privacy shield will be fixed
and cannot be removed, while the lower privacy shield can be
removed.
1. Align the four pegs on the privacy shield with the four mounting
slots around the keypad.
2. Press the privacy shield firmly to secure it into place.
Privacy Shield Mounting Slots
Mounting Slots
High Privacy ShieldLow Privacy Shield
Working Environment:
Operating temperature：0℃～50℃；
Relative humidity：5%～96%(Non-condensing)
Storage Environment:
Storage temperature：-20℃～70℃；
Relative humidity：5%～96% (Non-condensing)
Power Adapter: Input: 100‐240VAC, 50Hz/60Hz
Output: 5V/2A
SIM/PSAM Card Slots
SIM/PSAM Card Slots
SIM/Micro SD Card Tray
SIM/Micro SD Card Tray
PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
910
PAX TECHNOLOGY INC.
1. To insert card, open card slot cover and insert card
with chip facing up (see page 4). Close card slot cover.
2. To remove card, first push it further into slot. (The card will
then stick out of the slot a little.) Next, push card again to remove
it.
5
6
1. Open tray cover and insert SIM card ejector tool into hole at side
of card tray until tray opens.
2. Take tray out and put the SIM/Micro SD card on the tray in the
direction shown in page 4.
3. Gently push tray back into slot until firmly seated.
Operating System: Android 7.1
CPU: Quad-Core Cortex A53, 1.4GHz
Memory:
1 GB RAM + 8GB Flash
Display: 8-inch, Resolution 800 x 1280 pixels, multi-touch
capacitive screen, supports stylus pen
Audio: Built-in speaker, supports headphone output
Camera: Front camera, 8-mega pixels with flash, auto
focus, high-speed code scanning
Light sensor: Main display automatically adjusts backlight
brightness
Wireless communication: Supports Wi-Fi,
Bluetooth
® wireless
technology, 3G/4G Positioning: Support GPS, Compass, GlONASS
Card slots: SIM/SD 2-in-1 card slot
SIM/PSAM card slot
Micro SD card slot (supports maximum of 128GB)
Magnetic stripe card/IC card slot, 2-in-1,
supports MAG&ICC
Magnetic card reader: Supports Track 1/2/3
IC card reader: Complies with ISO7816 standards, EMV2000 L1
& L2, PBOC3.0
Contactless card reader: Compatible with ISO 14443 Type A&B
Specifications
Specifications
8
Device Location
9
Device Location
Cleaning the Device
1 0
Cleaning the Device
Locate the device on a counter top, desktop or table top. Keep
the device away from direct sunlight, excessive dust, moisture,
and heat. Avoid locating the device near electrical devices that
might introduce interference such as microwave ovens and blow
dryers.
WARNING:
Do not use industrial strength or abrasive cleaner as it may
damage or scratch the screen.
• Do not immerse tablet in water (or liquid).
• Do not spray water or cleaner into card reader or ports.
• To clean screen, apply distilled water or mild glass cleaner onto
a soft, lint-free cloth and gently wipe screen.
• To clean tablet, apply distilled water or plastic-safe cleaner onto
a soft, lint-free cloth and gently wipe tablet.
Installation and Usage TipsInstallation and Usage Tips
11
• Base functionality is not available while the device is connected
to a computer or when it is being charged using a Type C plug.
•Use the included USB cable with power adapter to charge the
device, otherwise the device may not operate normally.
• Avoid exposing the device to an excessively hot, humid, dusty,
or strong electromagnetic environment.
• Do not vibrate, shake, or drop the device.
• Do not insert or unplug any part of the device while it is
powered on. This may cause damage to an internal circuit.
• Please contact PAX technical support for assistance with the
device.
• Before using magnetic stripe card/IC / contactless card, check
if there is any suspicious person nearby, if so, let the relevant
personnel know.
Caution: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment. In a domestic environment,
this product may cause radio interference in which case the user
may be required to take adequate measures.
Power on: Press and hold the power button for three seconds
until screen display lights up and tablet powers up.
See page 3 (Top View) for the location of the power button.
Power off: Press and hold the power button for three seconds.
Select “Power off”.
Charge: Plug USB cable into USB port (see page 2, Left Side
View for the location of the USB port) or place the tablet onto its
base to charge the tablet.
Charging indicator: Charging indicator light displays charging
status:
• Red indicator – Tablet is charging.
• Green indicator – Charging is complete.
• Red and green indicators flashing alternately – Charging problem.
(See page 2 for the location of the Charging indicator.)
Power
Power
Card Readers
Card Readers
4
Magnetic stripe card: Insert magnetic stripe card into card slot
and push to the end with magnetic stripe facing down, then pull out
card at a constant speed to swipe card.
Smart card: Insert card with IC chip facing up, then push it to the
end of the card slot. Leave card inserted until prompted to remove.
Contactless card: When prompted, hold contactless card over
center of contactless logo area.
Privacy Shield
7
Privacy Shield
Caution: While the installation of a privacy shield is not required,
they do offer additional protection.
Please Note: Once installed, the higher privacy shield will be fixed
and cannot be removed, while the lower privacy shield can be
removed.
1. Align the four pegs on the privacy shield with the four mounting
slots around the keypad.
2. Press the privacy shield firmly to secure it into place.
Privacy Shield Mounting Slots
Mounting Slots
High Privacy ShieldLow Privacy Shield
Working Environment:
Operating temperature：0℃～50℃；
Relative humidity：5%～96%(Non-condensing)
Storage Environment:
Storage temperature：-20℃～70℃；
Relative humidity：5%～96% (Non-condensing)
Power Adapter: Input: 100‐240VAC, 50Hz/60Hz
Output: 5V/2A
SIM/PSAM Card Slots
SIM/PSAM Card Slots
SIM/Micro SD Card Tray
SIM/Micro SD Card Tray
PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
910
PAX TECHNOLOGY INC.
1. To insert card, open card slot cover and insert card
with chip facing up (see page 4). Close card slot cover.
2. To remove card, first push it further into slot. (The card will
then stick out of the slot a little.) Next, push card again to remove
it.
5
6
1. Open tray cover and insert SIM card ejector tool into hole at side
of card tray until tray opens.
2. Take tray out and put the SIM/Micro SD card on the tray in the
direction shown in page 4.
3. Gently push tray back into slot until firmly seated.
Operating System: Android 7.1
CPU: Quad-Core Cortex A53, 1.4GHz
Memory:
1 GB RAM + 8GB Flash
Display: 8-inch, Resolution 800 x 1280 pixels, multi-touch
capacitive screen, supports stylus pen
Audio: Built-in speaker, supports headphone output
Camera: Front camera, 8-mega pixels with flash, auto
focus, high-speed code scanning
Light sensor: Main display automatically adjusts backlight
brightness
Wireless communication: Supports Wi-Fi,
Bluetooth
® wireless
technology, 3G/4G Positioning: Support GPS, Compass, GlONASS
Card slots: SIM/SD 2-in-1 card slot
SIM/PSAM card slot
Micro SD card slot (supports maximum of 128GB)
Magnetic stripe card/IC card slot, 2-in-1,
supports MAG&ICC
Magnetic card reader: Supports Track 1/2/3
IC card reader: Complies with ISO7816 standards, EMV2000 L1
& L2, PBOC3.0
Contactless card reader: Compatible with ISO 14443 Type A&B
Specifications
Specifications
8
Device Location
9
Device Location
Cleaning the Device
1 0
Cleaning the Device
Locate the device on a counter top, desktop or table top. Keep
the device away from direct sunlight, excessive dust, moisture,
and heat. Avoid locating the device near electrical devices that
might introduce interference such as microwave ovens and blow
dryers.
WARNING:
Do not use industrial strength or abrasive cleaner as it may
damage or scratch the screen.
• Do not immerse tablet in water (or liquid).
• Do not spray water or cleaner into card reader or ports.
• To clean screen, apply distilled water or mild glass cleaner onto
a soft, lint-free cloth and gently wipe screen.
• To clean tablet, apply distilled water or plastic-safe cleaner onto
a soft, lint-free cloth and gently wipe tablet.
Installation and Usage TipsInstallation and Usage Tips
11
• Base functionality is not available while the device is connected
to a computer or when it is being charged using a Type C plug.
•Use the included USB cable with power adapter to charge the
device, otherwise the device may not operate normally.
• Avoid exposing the device to an excessively hot, humid, dusty,
or strong electromagnetic environment.
• Do not vibrate, shake, or drop the device.
• Do not insert or unplug any part of the device while it is
powered on. This may cause damage to an internal circuit.
• Please contact PAX technical support for assistance with the
device.
• Before using magnetic stripe card/IC / contactless card, check
if there is any suspicious person nearby, if so, let the relevant
personnel know.
Caution: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment. In a domestic environment,
this product may cause radio interference in which case the user
may be required to take adequate measures.
Power on: Press and hold the power button for three seconds
until screen display lights up and tablet powers up.
See page 3 (Top View) for the location of the power button.
Power off: Press and hold the power button for three seconds.
Select “Power off”.
Charge: Plug USB cable into USB port (see page 2, Left Side
View for the location of the USB port) or place the tablet onto its
base to charge the tablet.
Charging indicator: Charging indicator light displays charging
status:
• Red indicator – Tablet is charging.
• Green indicator – Charging is complete.
• Red and green indicators flashing alternately – Charging problem.
(See page 2 for the location of the Charging indicator.)
Power
Power
Card Readers
Card Readers
4
Magnetic stripe card: Insert magnetic stripe card into card slot
and push to the end with magnetic stripe facing down, then pull out
card at a constant speed to swipe card.
Smart card: Insert card with IC chip facing up, then push it to the
end of the card slot. Leave card inserted until prompted to remove.
Contactless card: When prompted, hold contactless card over
center of contactless logo area.
Privacy Shield
7
Privacy Shield
Caution: While the installation of a privacy shield is not required,
they do offer additional protection.
Please Note: Once installed, the higher privacy shield will be fixed
and cannot be removed, while the lower privacy shield can be
removed.
1. Align the four pegs on the privacy shield with the four mounting
slots around the keypad.
2. Press the privacy shield firmly to secure it into place.
Privacy Shield Mounting Slots
Mounting Slots
High Privacy ShieldLow Privacy Shield
Working Environment:
Operating temperature：0℃～50℃；
Relative humidity：5%～96%(Non-condensing)
Storage Environment:
Storage temperature：-20℃～70℃；
Relative humidity：5%～96% (Non-condensing)
Power Adapter: Input: 100‐240VAC, 50Hz/60Hz
Output: 5V/2A
SIM/PSAM Card Slots
SIM/PSAM Card Slots
SIM/Micro SD Card Tray
SIM/Micro SD Card Tray
PAX TECHNOLOGY INC. PAX TECHNOLOGY INC.
910
PAX TECHNOLOGY INC.
1. To insert card, open card slot cover and insert card
with chip facing up (see page 4). Close card slot cover.
2. To remove card, first push it further into slot. (The card will
then stick out of the slot a little.) Next, push card again to remove
it.
5
6
1. Open tray cover and insert SIM card ejector tool into hole at side
of card tray until tray opens.
2. Take tray out and put the SIM/Micro SD card on the tray in the
direction shown in page 4.
3. Gently push tray back into slot until firmly seated.
Operating System: Android 7.1
CPU: Quad-Core Cortex A53, 1.4GHz
Memory:
1 GB RAM + 8GB Flash
Display: 8-inch, Resolution 800 x 1280 pixels, multi-touch
capacitive screen, supports stylus pen
Audio: Built-in speaker, supports headphone output
Camera: Front camera, 8-mega pixels with flash, auto
focus, high-speed code scanning
Light sensor: Main display automatically adjusts backlight
brightness
Wireless communication: Supports Wi-Fi,
Bluetooth
® wireless
technology, 3G/4G Positioning: Support GPS, Compass, GlONASS
Card slots: SIM/SD 2-in-1 card slot
SIM/PSAM card slot
Micro SD card slot (supports maximum of 128GB)
Magnetic stripe card/IC card slot, 2-in-1,
supports MAG&ICC
Magnetic card reader: Supports Track 1/2/3
IC card reader: Complies with ISO7816 standards, EMV2000 L1
& L2, PBOC3.0
Contactless card reader: Compatible with ISO 14443 Type A&B
Specifications
Specifications
8
Device Location
9
Device Location
Cleaning the Device
1 0
Cleaning the Device
Locate the device on a counter top, desktop or table top. Keep
the device away from direct sunlight, excessive dust, moisture,
and heat. Avoid locating the device near electrical devices that
might introduce interference such as microwave ovens and blow
dryers.
WARNING:
Do not use industrial strength or abrasive cleaner as it may
damage or scratch the screen.
• Do not immerse tablet in water (or liquid).
• Do not spray water or cleaner into card reader or ports.
• To clean screen, apply distilled water or mild glass cleaner onto
a soft, lint-free cloth and gently wipe screen.
• To clean tablet, apply distilled water or plastic-safe cleaner onto
a soft, lint-free cloth and gently wipe tablet.
Installation and Usage TipsInstallation and Usage Tips
11
• Base functionality is not available while the device is connected
to a computer or when it is being charged using a Type C plug.
•Use the included USB cable with power adapter to charge the
device, otherwise the device may not operate normally.
• Avoid exposing the device to an excessively hot, humid, dusty,
or strong electromagnetic environment.
• Do not vibrate, shake, or drop the device.
• Do not insert or unplug any part of the device while it is
powered on. This may cause damage to an internal circuit.
• Please contact PAX technical support for assistance with the
device.
• Before using magnetic stripe card/IC / contactless card, check
if there is any suspicious person nearby, if so, let the relevant
personnel know.
Caution: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment. In a domestic environment,
this product may cause radio interference in which case the user
may be required to take adequate measures.
Power on: Press and hold the power button for three seconds
until screen display lights up and tablet powers up.
See page 3 (Top View) for the location of the power button.
Power off: Press and hold the power button for three seconds.
Select “Power off”.
Charge: Plug USB cable into USB port (see page 2, Left Side
View for the location of the USB port) or place the tablet onto its
base to charge the tablet.
Charging indicator: Charging indicator light displays charging
status:
• Red indicator – Tablet is charging.
• Green indicator – Charging is complete.
• Red and green indicators flashing alternately – Charging problem.
(See page 2 for the location of the Charging indicator.)
Power
Power
Card Readers
Card Readers
4
Magnetic stripe card: Insert magnetic stripe card into card slot
and push to the end with magnetic stripe facing down, then pull out
card at a constant speed to swipe card.
Smart card: Insert card with IC chip facing up, then push it to the
end of the card slot. Leave card inserted until prompted to remove.
Contactless card: When prompted, hold contactless card over
center of contactless logo area.
Privacy Shield
7
Privacy Shield
Caution: While the installation of a privacy shield is not required,
they do offer additional protection.
Please Note: Once installed, the higher privacy shield will be fixed
and cannot be removed, while the lower privacy shield can be
removed.
1. Align the four pegs on the privacy shield with the four mounting
slots around the keypad.
2. Press the privacy shield firmly to secure it into place.
Privacy Shield Mounting Slots
Mounting Slots
High Privacy ShieldLow Privacy Shield
Working Environment:
Operating temperature：0℃～50℃；
Relative humidity：5%～96%(Non-condensing)
Storage Environment:
Storage temperature：-20℃～70℃；
Relative humidity：5%～96% (Non-condensing)
Power Adapter: Input: 100‐240VAC, 50Hz/60Hz
Output: 5V/2A
SIM/PSAM Card Slots
SIM/PSAM Card Slots
SIM/Micro SD Card Tray
SIM/Micro SD Card Tray
This document is provided to you for informational purposes
only. All features and specifications are subject to change
without notice. PAX’s name and PAX’s logo are registered
trademarks of PAX Technology Inc. All rights reserved.
The
Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by
PAX Technology, Inc. is under license. Other trademarks and
trade names are those of their respective owners.
P/N:200312000000542
PAX TECHNOLOGY INC.
Aries8 Smart Tablet
PAX TECHNOLOGY INC.
Note: Product images shown may be different than actual
product received.
Quick Setup Guide
PAX TECHNOLOGY INC.
Box Contents
Box Contents
• 1 – Aries8 Smart Tablet
• 1 – Power Adapter
• 1 – USB Cable
• 1 – SIM Card Ejector Tool
• 1 –
• 1 – Quick Start Guide
Privacy Shield + Plastic Case
Product Description
Product Description
Power Adapter
USB Cable
SIM Card Ejector Tool
Charging Indicator Light Sensor
LCD
Contactless Card
Tap Area
RF Indicator 8-MP Camera
Keypad
Front View
Left Side View Right Side View
Speaker
Audio Jack
USB
Volume+
Volume-
SIM+Micro SD
SIM/PSAM
PSAM
Bottom View
Magnetic Card/IC Card Slot
Power Button
Top View
Underside View
Micro SD
Privacy Shield+Plastic Case
Privacy Shield
Card Slot Locations
SIM
Insert PSAM
card into slot
Insert SIM or
PSAM card
into slot
Insert Micro SD and/or
SIM card into tray
Responsible Party:
PAX Technology, Inc.
8880 Freedom Crossing Trail
Building 400, 3rd Floor, Suite 300
Jacksonville, FL 32256, USA
Help Desk
1-877-859-0099
www.pax.us
Note: Power adapter may vary.
Table of contents
