PC LINE P05SRDB09 User manual

Basic Strip Cut Shredder
Quick Start Guide
P05SRDB09
Product Overview
Congratulations on the purchase of
your new PC Line Shredder. Before
commencing the operation, please
check that you have all the items and
familarise yourself with this Quick Start
Guide.
Paper Feed
Shredder Bin
Operating Switch
AUTO OFF REV
Maximun 5 Sheets
AUTO OFF REV
Maximun 5 Sheets
PC Line Shredder_SHD001_091022.i1 1 22/10/09 3:25:16 PM

GB-2
Preliminaries
This product is built to shred paper. It is not built to take staples, credit cards, paper
clips, continuous forms, adhesive labels, transparencies, newspaper, cardboard or any
plastic. Using it for these purposes is likely to cause irreparable damage.
Capabilities Stripcut
Sheet Capacity* 5 (70gsm A4 size paper)
Paper Shred Size 7mm
Continuous Operation 2 minutes
*A4 (70g) paper at 230v, 0.6Amps; heavier paper, humidity or other than rated voltage may reduce capacity.
Operation
Operating Switch must be in the AUTO position to operate the shredder. Insert waste bag for
easy disposal.
What to do if...
Paper jam: Set to OFF, remove shredder head and empty the bin. Place back the shredder head
and follow any or all of the below procedures.
Continuous Operation:
2 minutes maximum
NOTE: Shredder rungs briey
after each pass to clear
entry. Continuous
operation beyond 2
minutes will trigger
60 minutes cool down
period.
AUTO OFF REV
Maximum 5 Sheets
Set to OFF and plug in
AUTO OFF REV
Maximum 5 Sheets
AUTO OFF REV
Maximum 5 Sheets
Check paper amount
Set to AUTO
Feed into paper entry
and release
Set to REV for 2-3 seconds
AUTO OFF REV
Maximum 5 Sheets
AUTO OFF REV
Maximum 5 Sheets

Alternate slowly back and forth
AUTO OFF REV
Maximum 5 Sheets
Set to OFF and unplug
AUTO OFF REV
Maximum 5 Sheets
Set to REV position
Remove shredder
head and cut
hanging shreds.
Replace shredder
head. Plug in.
PC Line Shredder_SHD001_091022.i2 2 22/10/09 3:25:22 PM

GB-3
Keep away from children and pets. Keep hands away from paper entry. Always unplug or
set safety lock when not in use.
Keep foreign objects - gloves, jewelry, clothing, hair, etc. away from shredder operatings. If
object enters top opening, switch to REV to back out object.
Never use aerosol, petroleum based or other ammable products on or near shredder. Do
not use canned air on shredder.
Do not use if damaged or defective.
Do not open shredder head: Danger of electric shock.
Do not place the shredder near or over heat or water source.
Maximum 5 sheets per pass to avoid jams.
Avoid touching exposed blades under the Stripcut shredder head.
The mains socket should be installed near the shredder and should be easily accessible.
Always turn o and unplug the shredder when not in use.
Unplug the shredder before emptying the bin.
•
•
•
•
•
•
•
•
•
•
•
Important Safety Instructions - Read Before Using!
Shredder doesn’t start:
Make sure the Shredder head is on the bin correctly.
Wait 60 minutes for the motor to cool down.
Remove and empty the bin.
Maintenance and Cleaning
The bin should be emptied regularly. Never let the bin become overfull with paper, other-
wise the opreation of the shredder may be aected.
Before emptying the bin, always unplug the shredder and place it in a safe place.
If the bin gets soiled, it can be washed in water, rinsed and dried.
The shredder housing can be cleaned with a cloth very lightly dampened with a mild soap
and water solution after the unit has been switched o and unplugged from the mains. Do
not reconnect the shredder until it has dried fully.
NEVER allow water solution or liquids to penetrate the shredder.
Regular oiling of the shredder is also necessary to ensure proper performance. If you are
running the shredder at or near capacity, we recommend oiling it monthly. Use non-aero-
sol vegetable-based oil in a long nozzle container.
Do not use ammable synthetic oil, petroleum-based products or aerosol lubricants of any
kind in or near the shredder at any time.
•
•
•
•
•
•
•
•
•
•
PC Line Shredder_SHD001_091022.i3 3 22/10/09 3:25:23 PM

Visit Partmaster.co.uk today for the easiest way to buy electrical spares
and accessories.
With over 1 million spares and accessories available we can deliver
direct to your door the very next day.
Visit www.partmaster.co.uk
or call
0870 6001 338
(UK customers only)
Calls charged at National Rate
Note: If you require a replacement for any of the items listed below, please quote
their corresponding part numbers.
Item Part Number
Quick Start Guide 08051S057136001
Shredder Bin 0203PR039000010
This symbol on the product or in the instructions means that your electrical and electronic
equipment should be disposed at teh end of its life separately from your household waste.
There are separate collection systems for recycling in the EU.
For more information, please contact the local authority or your retailer where you
puchased the prodcut.
Specications
Supply Voltage 230V ~50Hz
Rated current 0.6A
Net Weight 1.2kg
PC Line Shredder_SHD001_091022.i4 4 22/10/09 3:25:24 PM