PDQ ZBRG User manual
Joe's CBridge
Joe's House
PACKAGE CONTENTS
1: pdqSMART Ethernet Bridge
2: Ethernet Cable (1 Meter long)
3: BLE Antenna
4: Power Supply 5V@1A
5: Quick Start Guide
SETUP ZBRG ETHERNET
1: Active pdqSMART Server Account -
https://portal.stp-pdqsmart.com
2: Install pdqSMART-STP App on
Smartphone
3: Add at least 1 PDQ Smart Lock to account
Paste your
Product Label here
PRODUCT LABEL
Paste your
QR here
QR CODE
PLUG IN & POWER UP
1
PAGE 1 OF 2
QUICK START GUIDE
ZBRG ETHERNET BRIDGE
ETHERNET
PORT
BLE
ANTENNA
SOCKET
FACTORY
RESET
POWER
JACK
REGISTER PDQ SMART ETHERNET BRIDGE
TO PDQ SERVER
2
PN 88333 Rev 1 10-2019 PAGE 2 OF 2
Launch
pdqSMART-STP App
on Smartphone. Tap
Circle Plus
Tap SR Bridge Tap SCAN
QR CODE
and scan code.
*QR code is located
under the device
and front of
this guide
Enter user-friendly
device name and
device location.
Tap Register
1 2 3 4
LED INDICATIONS:
EVENT RED WHITE BLUE
Power On Blink for 3 times Blink for 3 times Blink for 3 times
Bluetooth Connection — — Blinking
Connected with
PDQ Smart Server OFF OFF OFF
Remote operation
request is in process — Blinking —
Remote operation completed — Solid for 3 Sec —
Ethernet Cable is unplugged Solid — Solid
IP Address is not assigned — — Solid
Bridge is not registered
with PDQ Smart Server Blinking — Solid
Cannot communicate
with PDQ Smart Server Blinking — —
QUICK START GUIDE
ZBRG ETHERNET BRIDGE
For more information about PDQ: 800.441.9692
Other PDQ Network Router manuals
