Peachtree Audio DS5.5 User manual

Owner's Manual

OS5.5 Loudspeaker Introduction
Congratulations on your purchase of the Peachtree Audio 085.5 loudspeaker. Your new speakers
represent the latest technologies
in loudspeaker design and manufacturing. The drivers are all
proprietary designs insuring the best possible sound and quality control. This is one reason for
the extended bass response on the satellites as well as the overall balance and extended top-
end bandwidth. The cabinet construction is
MOF (Medium density fber) covered in exotic real wood
veneers.
The
085.5 will provide outstanding performance and years of listening enjoyment.
Hookup is simple.
The positive (+) speaker wire from your amplifier attaches to the positive terminal on the 085.5.
Positive terminals are almost always color coded REO. The negative (-) speaker wire from your
amplifier attaches to the negative terminal
on the 085.5. Negative terminals are almost always color
coded BLACK.
Specifcations
Model Bass Tweeter Power Frequency Impedance Weight Accessories
driver Req. response
055.5 5" long
1" dome 30-150 50HZ· 6 ohms 14.33 Lbsl nla
excursion watts 20KHZ 6.5 KG

Guarantee and Service
Peachtree Audio loudspeakers are guaranteed for aperiod of 5years from the date of original purchase
against manufacturing defects. Signal Path accepts no responsibility for defects arising from accident,
abuse, wear and tear, modifcation or operation outside of specifcations.
No warranty card is necessary. Your sales receipt from an authorized
dealer will satisfy our
requirements for warranty replacement parts. You may also register online at:
Website: www.signalpathint.com
Defective equipment
All speakers should be returned in its original packaging to the supplier, dealer, or the Signal Path
service center. Alocal dealer can handle most speaker repair.
Era will not accept responsibility for damage or loss occurring during transit to or from the parties
claiming under this guarantee.
In the unlikely event that you have aproblem with any Peachtree Audio speaker, please
call for return authorization number before returning products for service. Any speaker
received without
an RA number will be refused.
Contact and Support Information
Signal Path International
2045 120th Ave. NE
Bellevue, WA 98005
Tel: [phone]
Fax: [phone]