Peak RADIX User manual
IT’S TIME FOR BETTER TATTOOING…
FROM THE GROUND UP.
MANUAL
WIRELESS FOOTSWITCH
TABLE OF CONTENTS
PEAK RADIX DIAGRAM
TECHNICAL SPECIFICATIONS
KEY FEATURES
HOW TO USE YOUR PEAK RADIX
WARRANTY INFORMATION
PAGE 1
2
3
3
4
5
PEAK RADIX DIAGRAM
USB INPUT
PAGE 2
STATUS
INDICATOR
POWER/PAIRING
BUTTON
Net Weight: 160g
Dimensions: 4” diameter
Pairs to Surge Power Supply with RF signal
Durable zinc alloy puck
Wirelessly compatible with the Peak Surge Power Supply
Rechargeable with USB-C cable
Charges fully in 1 hour
Operates for up to 2 months on 1 full charge
Lightweight and compact
TECHNICAL SPECIFICATIONS & KEY FEATURES
TECHNICAL SPECIFICATIONS
KEY FEATURES
PAGE 3
HOW TO USE YOUR PEAK RADIX
PAGE 4
CONNECTING YOUR RADIX TO THE PEAK SURGE POWER SUPPLY
UNPAIRING THE RADIX FROM THE SURGE
Press down on the top of your Radix footswitch, then quickly double-press the button on the bottom of the footswitch
to turn it on. A slow blinking red light on the top of your Radix will indicate your footswitch is ready for pairing.
Press and hold the +/- buttons on your Surge power supply. Wait until the display screen on the power supply shows
“RF.”
Press down on the top of your Radix, then single-press the button on the bottom of the footswitch. A rapid blinking
red light will appear on the top of your Radix footswitch. The display screen of your Surge power supply will say “LN.”
Wait for the rapid blinking light on the top of your Radix footswitch to turn off. When pairing is complete, your Surge
power supply will return to the home screen.
Press down and hold the button on the bottom of your Radix footswitch to turn it back on.
Make sure your Radix footswitch is on, then press and hold the +/- buttons on your Surge power supply. Wait
until the display screen shows “RF”
Press the power button on your Surge. The screen will say “CL.”
Once unpaired, the screen of your Surge power supply will return to the home screen.
1
2
3
1
2
3
4
5
If you experience any technical issues or your Peak Radix footswitch requires repairs, please contact our customer
service team at 410-712-0145. After our customer service team provides you with a return authorization, you can
download and fill out our Peak Repair Order Form:
Mail your completed repair order form, footswitch, and invoice as proof of purchase to 7410 Coca Cola Dr STE
108, Hanover, MD 21076. You can also direct any questions or concerns regarding issues with your Peak Radix
footswitch to info@peakneedles.com.
If you purchased your Radix less than a year ago, we will replace it with a brand new model. If your item is older
than a year, it is unfortunately no longer protected under our one-year warranty.
WARRANTY INFORMATION
WARRANTY INFORMATION
PAGE 5
Table of contents
Other Peak Switch manuals
