Pearl SLG-10 User manual

The Pearl SLG-100 “Triple-Function” Marching Sling can be worn as a conventional sling,
sling with waist belt for added support and comfort, or a sling with waist belt with two at-
tachment points for maximum stability during high-energy shows.
The sling and waist belt are made of high strength black nylon and each adjusts for accom-
modate virtually all body types.
The SLG100 is ideally suited for today’s Pipe and Traditional Drum Lines and is designed
to work with all Marching Snare and Single Tenor Drums.
Parts Identification :
Shoulder strap with Hook “A”
Waist strap with Velcro closure and Hook “B”
SLG Ring ”C”
Mounting Hook “D”
SLG TWO- STRAP TRADITIONAL
Over the shoulder sling mount with an additional waist support strap for added security
and drum support. The Two-strap traditional position allows for more mobility by keeping
the drum from turning on the body, while keeping the instrument in a traditional slanted
playing position.
a. Attach Waist strap to SLG Ring C using Velcro closure.
b. Drape shoulder strap over right shoulder and adjust length of shoulder strap
where SLG Ring is approximately at left hip.
c. Attach Shoulder strap hook Ato SLG Ring with mounting hook D on opposite
side of ring, and waist strap Velcro closure to the left.
d. Wrap waist strap around back and attach hook B to SLG ring. Adjust
length of waist strap for a snug fit. (see drawing left )
e. Attach hook D to carry hook or angle reduction bar on your drum.
f. Adjust length of straps for comfort and playing position.
SLG-100 Triple Function Sling
The SLG-100 can be set-up in three different
configurations to meet your needs:
A
C
B
D
OVER for more options

SLG-100 Triple Function Sling
ONE- STRAPTRADITIONAL
Over the shoulder sling mount using a single strap for traditional slanted playing position.
This sling can be worn under or over the uniform.
a. Remove waist strap from SLG ring C by releasing Velcro closure.
(set aside)
b. Drape shoulder strap over right shoulder and adjust length of shoulder strap
where SLG Ring is approximately at left hip.
c. Attach Shoulder strap hook A to SLG Ring with mounting hook D on opposite
side of ring. (see drawing left)
d. Attach hook D to carry hook or angle reduction bar on your drum.
e. Adjust length of strap for comfort and playing position.
SLG DOUBLE HOOK MOUNT
Over the shoulder sling mount with an additional waist support strap for added security and
drum support. The Double Hook Mount position allows for maximum mobility, while allow-
ing the instrument to be played in a traditional slanted playing position, or in a more in-front
“Show Style” position. (We recommend using an angle reduction bar on your drum for the
most successful performance in this position)
a. Attach Waist strap to SLG Ring C using Velcro closure.
b. Drape shoulder strap over right shoulder and adjust length of shoulder strap
where SLG Ring is approximately at left hip.
c. Attach Shoulder strap hook A to SLG Ring with mounting hook D on opposite
side of ring, and waist strap Velcro closure to the left.
d. Attach mounting hook D Angle reduction bar in a left side position
(from players view) .
e. Wrap waist strap around back and attach hook B to angle reduction bar on drum
in a right side position (from players view, see drawing right).
f. Adjust length of waist strap to desired length to allow freedom of drum visual
stunts, while still keeping the drum secure on the body.
Mounting options Cont’d:
Page 2