Peavey AAM 1602 User manual

The AAM 802 and 1602 mixers are new compact two bus mixers from Architectural Acoustics.
These mixers are perfect for the small to medium sound reinforcement jobs. Both mixers use a new
“ studio quality ” microphone preamp developed by Peavey Electronics. These mixers have been built
exclusively for the contracting industry and feature all input and output connections on the rear of
the unit, perfect for permanent installations. These mixers are also part of a complete new family of
products from AA, engineered to complement each other.
Features:
• Eight or 16 microphone inputs complete with XLR connectors
• Three band EQ on 1 thru 6, 1 thru 14 with mid sweep
• Three band fixed EQ on 7 thru 8, 15 thru 16
• Two pre and post EQ sends
• Inserts on 1 thru 4, 1 thru 8
• Pad and polarity on 7 thru 8, 15 thru 16
• Mute and PFL on each input
• LED clip, signal, PFL and mute indicated
• Two stereo effects returns
• Precision 60 mm faders on input channels
• Left, right, monitor 1 and 2 and mono out with balanced XLR connectors
• Rugged console design, rack mount included with AAM 802
• 48 V phantom power
• Separate tape in and out
AAM™802
AAM 1602
Compact two-bus mixers

AAM 802/1602 COMPACT CONSOLE
Specifications:
Input Specifications:
Function Input Z Input Gain Input Levels Bal/ Connector
(ohms) Settings Min** Nominal* Max UnBal.
Min
Microphone 2.2 k Max. Gain -74 dBu -54 dBu -37 dBu Bal. XLR: Pin 1 Gnd,
(150 ohms) (58 dB) Pin 2 (+),
Min. Gain Pin 3 (-)
(10 dB) -27 dBu -6 dBu +10 dBu
Line Input 10 k Max. Gain -54 dBu -34 dBu -17 dBu Bal. 1/4" TRS; Tip (+),
(10 k ohms) (38 dB) Ring (-),
Sleeve Ground
Min. Gain -6 dBu +14 dBu +31 dBu
(-10 dB)
Insert 10 k N/A -16 dBu +4 dBu +22 dBu Unbal. 1/4" TRS; Tip Send,
Return (0) dB) Ring Return,
Sleeve Ground
Stereo Line 10 k Max. Gain -26 dBu +4 dBu +22 dBu Unbal. 1/4" TS; Tip (+),
Input (30 dB) Sleeve Ground
Aux Returns 10 k N/A -26 dBu +4 dBu +22 dBu Unbal. 1/4" TS; Tip (+)
(0 dB) Sleeve Ground
Tape 10 k N/A -26 dBu -10 dBV +12 dBu Unbal. RCA Phono
(10 dB)
0 dBu=0.775 V (RMS)
** Min. input level (sensitivity) is the smallest signal that will produce nominal output (+4 dBu) with channel and master
level controls set for maximum gain.
* Nominal settings are defined as all controls set a 0 dB (or 50% rotation for rotary pots) except the gain adjustment pot,
which is as specified.

Output Specifications:
Function Minimum Output Level Bal/ Connector
Load UnBal.
Ohms Min** Max
Main L/R 600 +4 dBu +22 dBu Bal. 1/4" TRS: Tip (+),
Ring (-)
Sleeve Ground
+4 dBu +22 dBu Bal. XLR: Pin 1 Ground
Pin 2 (+),
Pin 3 (-), (Bal.)
Monitors 600 +4 dBu +22 dBu Bal. 1/4" TRS: Tip (+)
Ring (-),
Sleeve Ground
+4 dBu +22 dBu Bal. XLR: Pin 1 Ground,
Pin 2 (+),
Pin 3 (-), (Bal.)
Mono 600 +4 dBu +22 dBu Bal. 1/4" TRS: Tip (+),
Ring (-),
Sleeve Ground
+4 dBu +22 dBu Bal. XLR: Pin 1 Ground
Pin 2 (+),
Pin 3 (-), (Bal.)
Effects 600 +4 dBu +22 dBu Unbal. 1/4" Phone: Tip (+),
Sends Sleeve Ground
Channel 600 +4 dBu +22 dBu Unbal. 1/4" TRS: Tip Send,
Insert Send Ring Return,
Sleeve Ground
Headphone 8 +4 dBu +22 dBu Unbal. 1/4: TRS: Tip Left,
(No load) Ring Right,
Sleeve Ground
Tape 2.2 k +4 dBu +22 dBu Unbal. RCA Phono
0 dBu=0.775 V (RMS)
Gain:
Mic Input Gain Adjustment Range: 10 dB to 58 dB
Mic Input to L/R Balance Output 78 dB (Max. Gain)
Mic Input Longest Path 93 dB (Max. Gain)
Line Input Gain Adjustment Range: -10 dB to 38 dB
Line Input to L/R Bal. Output 60 dB (Max. Gain)
Line Input to longest Path 73 dB (Max. Gain)
Stereo Line Input Gain Adjustment Range 10 dB
Stereo Line Input to L/R Balance Output 36 dB (Max. Gain)
Stereo Line Input Longest Path 46 dB (Max. Gain)
Aux Return to L/R Balance Output 34 dB (Max. Gain)
Frequency Response:
Mic Input to L-R Output 11 Hz to 42 kHz +0 dB/-1 dB
Total Harmonic Distortion (THD):
<0.008% 20 Hz to 20 kHz Mic to L-R Output (10 Hz to 80 kHz BW)

Hum and Noise:
Output Residual Noise S/N Ratio Test Conditions
Ref. 0 dBu
Master L/R -100 dBu 104 dB All faders down
-88 dBu 92 dB Master fader nominal,
Channel faders down,
All channels muted
-84 dBu 88 dB All controls nominal,
mic gain min.
Mono -90 dBu 94 dB All faders down
-88 dBu 92 dB Master fader nominal,
Channel faders down,
All channels muted
Monitors -102 dBu 106 dB All faders down
-90 dBu 94 dB Master fader nominal,
All channels muted
Effects -95 dBu 99 dB All controls off
Sends
-82 dBu 86 dB All channel sends nominal
(Hum and Noise Measurements: 22 Hz to 22 kHz BW)
Equivalent Input Noise (EIN):
-129 dBu (Input terminated with 150 ohms)
Crosstalk:
>80 dB adjacent input channels (20 Hz — 20 kHz)
>70 dB left to right outputs (20 Hz — 20 kHz)
Common Mode Rejection Ration (Mic Input):
50 dB min. (20 Hz to 20 kHz)
70 dB type @ 1 kHz
Meters:12 segment, peak reading
(0 dB = +4 dBu)
Signal/Overload Indicators:
Red LED lights 2 dB below clipping
Dimensions (H x W x D):
AAM 802: 5.500" x 15.000" x 16.500" (13.97 cm x
38.10 cm x 41.91 cm)
AAM 1602: 5.500" x 23.000" x 16.500" (13.97 cm
x 58.42 cm x 41.91 cm)
Weight:AAM 802: 13.7 lbs. (6.21 kg)
AAM 1602: 19.7 lbs. (8.93 kg)
Features and specifications subject to change without notice.
Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301
[phone] • FAX [phone] • http://aa.peavey.com
©2001 Printed in the U.S.A. 02/01