peerless-AV DS-ACC770 Guide

ISSUED: 08-08-11 SHEET #: 125-9230-1
1 of 2
IMPORTANT! Read entire instruction sheet before you start installation and assembly.
Before you start check the parts list below to make sure all of the parts shown are included.
Installation and Assembly:
PC Component Plate for PULL-OUT Video Wall Mounts
Models: DS-ACC770
Open DS-VW765-LAND using instructions provided with DS-VW765-LAND.
Insert and position component plate (A) as shown. Secure component plate to mounting surface using two
screws (B) as shown below.
1
B
A
SIDE VIEW
B
A
DS-VW765-LAND
Description Qty. Part #
A
component plate 1 145-T1407
B#10 x 3/4" wood screw 2 500-9006
C13" black velcro strip 2 560-0232
Parts List
C

ISSUED: 08-08-11 SHEET #: 125-9230-1
2 of 2
© 2011 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
Use two 13" black velcro strips (C) to secure PC component to component plate (A).
Use slots in component plate (A) when securing 13" black velcro strips (C).
2
SLOT
A
PC COMPONENT