peerless-AV DS-S555-3X2 User manual

12014-07-28 #:009-9088-6 (2020-01-14)
ENG
DS-S555-3X2
46" - 55"
(117 - 140 cm)
600 lb
(272 kg)
MAX

22014-07-28 #:009-9088-6 (2020-01-14)
Symbols
ENG
WARNING
ENG
x3
Screws must get at
least three full turns
and t snug.
ENG
Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
2
+1/2
4
3
ENG
Display center.
ENG
3/8"
(10mm)
3/8"
(10mm)
ENG - This product is designed to be installed on solid concrete. Hardware is included for solid concrete
installation. Before installing make sure the supporting surface will support the combined load of the equipment
and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product
may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to
safely lift and position equipment. This product is intended for indoor use only. Use of this product outdoors could
lead to product failure or personal injury. Be careful not to pinch ngers when operating the mount. For support
please call customer care at 1-800-865-2112.
WARNING

32014-07-28 #:009-9088-6 (2020-01-14)
ENG Parts (Before beginning, make sure you have all parts shown below).
Parts List
Part #Description Qty
Apedestal 2 147-T1426
Bcolumn 2 146-T1131
Ccover 2 145-T1809
Dleft adaptor bracket 6 146-T1609
Eright adaptor bracket 6 146-T1608
Fside support bracket 2 145-T1807
Gvertical support bracket 4 145-T1806
Hcomputer cover 1 145-T1930
Icomputer shelf 1 145-T1931
Jdual cross support 2 146-T1905
Kcord bracket 4 146-T1321
Lknob 4 560-1160
Mcross support 2 146-T1904
Nplate connections 4 145-T1821
OM8 x 16mm socket button screw 68 520-9527
PM8 square nut 32 530-1066
Qcover clip 8 590-0317
RM5 x 10mm type-f, socket pin screw 14 520-1164
S1/4" power bit 1 560-0263
T5mm allen wrench 1 560-9640
Unylon shoulder washer 24 590-2233
VM6 x 12mm socket pin screw 24 520-1050
W4mm allen wrench 1 560-9646
XM6 x 35mm screw 8 520-0717
Yrawl bolt #6913 8 5M9-381-H03
ZM8 x 20mm screw 4 520-1754
C (2)
cover
B (2)
column
G (4)
vertical support
bracket
F (2)
side support
bracket
A (2)
pedestal E (6)
right adaptor
bracket
D (6)
left adaptor
bracket

42014-07-28 #:009-9088-6 (2020-01-14)
M (2)
cross support
W (1)
4mm allen
wrench
H (1)
computer cover
J (2)
dual cross
support
O (68)
M8 x 16mm
P (32)
M8 square nut
Q (8)
cover clip
R (14)
M5 x 10mm
S (1)
1/4" power
bit
T (1)
5mm allen
wrench
U (24)
nylon shoulder
washer
V (24)
M6 x 12mm
N (4)
plate
connections
I (1)
computer shelf
rawl bolt
Y (8)
M6 x 35mm
X (8)
K (4)
cord
bracket
L (4)
knob
Z (4)
M8 x 20mm

52014-07-28 #:009-9088-6 (2020-01-14)
1
x2
X (4)
AB

62014-07-28 #:009-9088-6 (2020-01-14)
DISPLAY HEIGHT
TIGHTEN
CONNECTING
HARDWARE
2-1
2-2
O (6)
P (4)
G (4)
G
1/8"
(3mm)
1/8"
(3mm)
x4
T
T

72014-07-28 #:009-9088-6 (2020-01-14)
3-1
x2 x2
Q (4)
C
3-2
K (2)
L (2)
TOP VIEW
TIGHTEN
CONNECTING
HARDWARE
KL

82014-07-28 #:009-9088-6 (2020-01-14)
4
ENG - When installing Peerless mounts on a concrete oor, the oor must be at least 8" thick with a minimum
compressive strength of 2000 psi. Never attach concrete expansion anchors to concrete covered with plaster,
drywall, or other nishing material.
WARNING

92014-07-28 #:009-9088-6 (2020-01-14)
4
Y (8)
4-1
Align base. Mark mounting holes.
ENG
4-3
Align base. Install using concrete anchors
provided.
ENG
3/8"
(10mm)
55.00"
(1397mm)
ENG Maximum 35 ft • lb (47 N.M.).
55.00"
(1397mm)
4-2
Drill mounting holes into
supporting surface
(3" (76mm) minimum
depth required).
ENG
3/8"
(10mm)
3"
(76mm)
3/8"
(10mm)

10 2014-07-28 #:009-9088-6 (2020-01-14)
5-1
5-2
5-3
J
M
O (4)
O (4)
P (4)
P (2)
Z (2)
N (2)
x2
x2
x2
T
T
T