peerless-AV DS-S560-2X2 User manual

12014-07-29 #:009-9087-6 (2020-01-14)
ENG
DS-S560-2X2
46" - 60"
(117 -152 cm)
500 lb
(227 kg)
MAX

22014-07-29 #:009-9087-6 (2020-01-14)
Symbols
ENG
WARNING
ENG
x3
Screws must get at
least three full turns
and t snug.
ENG
Do not overtighten screws.
ENG
Tools Needed for Assembly.
ENG
To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
1
2
+1/2
4
3
ENG
Display center.
ENG
3/8"
(10mm)
3/8"
(10mm)
ENG - This product is designed to be installed on solid concrete. Hardware is included for solid concrete
installation. Before installing make sure the supporting surface will support the combined load of the equipment
and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product
may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to
safely lift and position equipment. This product is intended for indoor use only. Use of this product outdoors could
lead to product failure or personal injury. Be careful not to pinch ngers when operating the mount. For support
please call customer care at 1-800-865-2112.
WARNING

32014-07-29 #:009-9087-6 (2020-01-14)
This page intentionally left blank.ENG

42014-07-29 #:009-9087-6 (2020-01-14)
Parts List
Part #
Description Qty
Apedestal 2 147-T1426
Bcolumn 2 146-T1131
Ccover 2 145-T1809
Dvertical support bracket 4 145-T1806
Eleft adaptor bracket 4 146-1609
Fright adaptor bracket 4 146-1608
Gcomputer cover 1 145-T1930
Hcomputer shelf 1 145-T1931
Idual cross support 2 146-T1905
Jcord bracket 4 146-T1321
Kknob 4 560-1160
LM8 x 16mm socket button screw 40 520-9527
MM8 square nut 16 530-1066
Ncover clip 8 590-0317
OM5 x 10mm type-f, socket pin screw 10 520-1164
P1/4" power bit 1 560-0263
Q5mm allen wrench 1 560-9640
Rnylon shoulder washer 16 590-2233
SM6 x 12mm socket pin screw 16 520-1050
T4mm allen wrench 1 560-9646
UM6 x 35mm screw 8 520-0717
Vrawl bolt #6913 8 5M9-381-H03
Parts (Before beginning, make sure you have all parts shown below).
C (2)
cover
B (2)
column
D (4)
vertical support
bracket
A (2)
pedestal F (4)
right adaptor
bracket
E (4)
left adaptor
bracket
ENG

52014-07-29 #:009-9087-6 (2020-01-14)
G (1)
computer cover
J (4)
cord
bracket
I (2)
dual cross
support
L (40)
M8 x 16mm
M (16)
M8 square nut
N (8)
cover clip
O (10)
M5 x 10mm
P (1)
1/4" power bit
Q (1)
5mm allen
wrench
nylon shoulder
washer
R (16)
M6 x 12mm
S (16)
4mm allen
wrench
T (1)
H (1)
computer shelf
rawl bolt
V (8)
M6 x 35mm
U (8)
K (4)
knob

62014-07-29 #:009-9087-6 (2020-01-14)
1
x2
U (4)
A
B

72014-07-29 #:009-9087-6 (2020-01-14)
2-1
2-2
L (6)
M (4)
D (4)
D
1/8"
(3mm)
1/8"
(3mm)
TIGHTEN
CONNECTING
HARDWARE
DISPLAY
HEIGHT
x4
Q
Q

82014-07-29 #:009-9087-6 (2020-01-14)
3-1 3-2
x2 x2
J (2)
K (2)
TIGHTEN
CONNECTING
HARDWARE
TOP VIEW
JK
N (4)
C

92014-07-29 #:009-9087-6 (2020-01-14)
4
ENG - When installing Peerless mounts on a concrete oor, the oor must be at least 8" thick with a minimum
compressive strength of 2000 psi. Never attach concrete expansion anchors to concrete covered with plaster,
drywall, or other nishing material.
WARNING

10 2014-07-29 #:009-9087-6 (2020-01-14)
4
V (8)
4-1
Align base. Mark mounting holes.
ENG
4-3
Align base. Install using concrete anchors
provided.
ENG
3/8"
(10mm)
55.00"
(1397mm)
ENG Maximum 35 ft • lb (47 N.M.).
55.00"
(1397mm)
4-2
Drill mounting holes into
supporting surface
(3" (76mm) minimum
depth required).
ENG
3/8"
(10mm)
3"
(76mm)
3/8"
(10mm)