peerless-AV KIP586-3LG-EUK User manual

12016-08-03 #:180-9087-1
ENG
KIP586-3LG(-S)-EUK

22016-08-03 #:180-9087-1
This page was intentionaly left blank
ENG

32016-08-03 #:180-9087-1
ENG - Before installing make sure the supporting surface will support the combined load of the equipment and
hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail.
Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift
and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to
product failure or personal injury. Be careful not to pinch fingers when operating the mount. For support please
call customer care at 1-800-865-2112.
WARNING
Symbols
ENG
WARNING
ENG
x3
Screws must get at
least three full turns
and fit snug.
ENG
Tools Needed for Assembly.
ENG
1
2
ENG To properly tighten screws: Tighten until screw
head makes contact, then tighten another 1/2
turn. Do not overtighten screws.
4
+1/2
3
Do not overtighten screws.
ENG

42016-08-03 #:180-9087-1
A (1)
main assembly
B (1)
base cover front
J (1)
base cover rear
D (1)
top panel
E (3)
corner cover
C (6)
display bracket F (16)
M8 x 10mm screw
G (8)
10-32 x .375" screw black
H (8)
10-32 x .375" screw zinc
I (5)
cable tie
Parts List KIP586-4LG
Part #
KIP586-4LG-S
Part #Description Qty
Amain assembly 1 151-T1264 151-T1264
Bbase cover front 1 151-P1221 151-4251
Cdisplay bracket 6 151-T1213 151-T1213
Dtop panel 1 151-P1259 151-4259
Ecorner cover 3 151-P1260 151-4260
FM8 x 10mm phillips screw 16 520-1605 520-1605
G#10-32 x .375" philips screw black 8 520-1130 520-1130
H#10-32 x .375" phillips screw zinc 8 520-2130 520-2130
Icable tie 5 590-1168 590-1168
Jbase cover rear 1 151-P1253 151-4253

52016-08-03 #:180-9087-1
1
G or H (4)
B
J
A

62016-08-03 #:180-9087-1
2
F (4)
C (2)
x3 x3

72016-08-03 #:180-9087-1
3

82016-08-03 #:180-9087-1
4
E (3)

92016-08-03 #:180-9087-1
5G or H (3)
D

10 2016-08-03 #:180-9087-1
This page was intentionaly left blank
ENG