peerless-AV SS560M Guide

Flat Panel Stand
for 32" to 65" Flat Panel Displays
The Flat Panel Stand is designed to provide ideal display viewing position, centralize audio video
components and match the décor of any environment. The full line of accessories enables each
stand to be fully tailored to meet specific requirements; whether video conferencing from a
boardroom or presenting on a trade show floor. And the internal cable management hides all
the AV cabling, providing a clean, clutter-free look.
Display size: 32" - 65" Max load: 150lb (68kg)
SS560M
Continous vertical
adjustment for perfect
viewing height
Incremental tilt of -2°, 0°
and +5° makes it simple
to set multiple angles for
preferred viewing and
aids in reducing screen
glare
Metal or tinted tempered
glass shelf provides
storage space for A/V
components. These
shelves are designed to
hold up to 50 pounds
each, ensuring equipment
and user safety.
Internal cable
management for clean,
clutter free look
Feet with a hard plastic
base with steel casing
FEATURES
VERTICAL ADJUSTMENT
Continous vertical adjustment
for perfect viewing height
COMPONENT PLACEMENT
Metal or tinted tempered glass
shelf provides storage space for
A/V components. These shelves are
designed to hold up to 50lb each,
ensuring equipment and user safety.
Internal cable
management
INCREMENTAL TILT
Incremental tilt of -2°, 0°
and +5° makes it simple
to set multiple angles for
preferred viewing and aids
in reducing screen glare

A R C H I T E C T S S P E C I F I C A T I O N S
Flat Panel Stand stand shall be a Peerless model SS560M/G and shall be installed where indicated on the plans. It shall be constructed of heavy gauge cold rolled steel
and finished with scratch resistant black or silver fused epoxy. Assembly and installation shall be done according to instructions provided by the manufacturer.
PACKAGE SIZE (W x H x D) PACKAGE SHIP WEIGHT PACKAGE UPC CODE PACKAGE CONTENTS UNITS IN PACKAGE
SS560M/SS560G 57.7" x 19.2" x 7.7"
(1466 x 488 x 196mm)
SS560M: 87.3lb (40.2kg)
SS560G: 88.8lb (40.2kg)
SS560M:
SS560G:
735029277330
735029277347
Stand, metal or tinted
glass shelf, optional
universal adapter plate,
assembly and screen
attachment hardware
1
Package Specifications
DIMENSIONS (W x H x D ) PRODUCT WEIGHT LOAD CAPACIT Y FINISH AVAILABLE COLORS
SS560M/SS560G 35.6" x 63" x 26.9"
(904 x 1600 x 683mm)
SS560M: 74lb (33.6kg)
SS560G: 72lb (32.6kg)
150lb display (68.3kg)
50lb per shelf (22.6kg)
Scratch
resistant
fused
epoxy
SS560M:
SS560G:
Black stand with metal shelf
Black stand with tinted glass shelf
Product Specifications
Model Numbers WARRANTY: Limited 5-year
All dimensions = inch (mm)
SS560M Flat Panel Stand with metal shelf for 32" to 65" Flat Panel Displays
SS560G Flat Panel Stand with tinted glass shelf for 32" to 65" Flat Panel Displays
Accessories
ACC313: Metal Shelf
ACC318: Tinted Glass Shelf
ACC319: Video Conferencing Shelf
ACC314: Laptop Arm
ACC315: Base Shelf
ACC320: 20' Electrical Cord Wrap
ACC316: Safety Belt
40.00"
(864mm)
59.84"
(1520mm)
10.81"
(275mm)
27.45"
(697mm)
30.75"
(781mm)
28.75"
MAX.
(730mm)
17.05"
MAX.
(433mm)
ADAPTER PLATE
18.00"
(457mm)
1.25"
(32mm)
0.85"
(22mm)
0.75"
(19mm)
VERTICAL BRACKET
15°
ISOMETRIC VIEW
FRONT VIEW SIDE VIEW SIDE VIEW
15° TILT

Models: SS560M
Installation and Assembly: 32" - 65" Flat Panel Display Stand
Max UL Load Capacity:
150 lb (68 kg) display
50 lb (22.7 kg) per shelf
ISSUED: 02-25-11 SHEET #: 009-9052-2 10-30-11
2300 White Oak Circle • Aurora, Il 60502 • [phone] • Fax: [phone] • www.peerlessmounts.com

2 of 41 ISSUED: 02-25-11 SHEET #: 009-9052-2 10-30-11
NOTE: Read entire instruction sheet before you start installation and assembly.
Table of Contents
Parts List............................................................................................................................................................................ 3, 4
Assembling Cart .....................................................................................................................................................................5
Attaching Universal Adapter Plate....................................................................................................................................... 10
Installing Adapter Brackets ..................................................................................................................................................11
CordManagement ............................................................................................................................................................... 13
Tools Needed for Assembly
•level
•phillips screwdriver
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US
customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact
your local distributor.
• This product should only be installed by someone of good mechanical aptitude, and fully understands
these instructions.
• Never exceed the Maximum UL Load Capacity on page 1.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
• The cart is not affixed or secured to the floor, and may therefore tip over and/or fall if display and/or stand is shaken
or hit. Always monitor children and do not let children play alone around stand as they could get hurt by a falling
display. Not recommended for use in areas with heavy traffic.
WARNING

3 of 41 ISSUED: 02-25-11 SHEET #: 009-9052-2 10-30-11
Before you begin, make sure all parts shown are included with your product.
Parts may appear slightly different than illustrated.
Description Qty. Part Numbe
r
A
screen mount bracket 1 201-1156
Bhook plate 1 201-1157
Cshelf support 1 201-1158
Dbase 1 009-1223
Euniversal plate 1 201-1110
Fadapter bracket 2 201-1510
Gupright 1 580-1180
Htop cover 1 590-1210
I1/4-20 x 12mm decorative screw 14 520-2325
J1/4-20mm nut 10 530-1050
L3/8-16 x 2.5" socket screw 3 520-9550
M7/32" allen wrench 1 560-9715
N4 mm allen wrench 1 560-9646
O8/32 nylock nut 6 530-1038
Pshelf pan 1 009-1225
Q6 mm allen wrench 1 560-9716
Rleft leg 1 009-1296
Sright leg 1 009-1295
Tfoot 4 600-1025
V
joint connector nut 4 530-1037
W
3/8
-
16 x 1.5
"
screw bolt
4
520
-
1329
Parts List
W
3/8-16 x 1
.
5 screw bolt
4
520 1329
X
M10 x .402 ID lock washer 3 540-9424
Z3/16 allen wrench 1 560-0071
A
A
M4 x 12 mm serrated washer head socket pin screw 6 510-1079
BB M4 x 25 mm serrated washer head socket pin screw 4 510-1082
CC M5 x 12 mm socket pin screw 4 520-1064
DD M5 x 25 mm socket pin screw 4 520-1122
EE M6 x 12 mm socket pin screw 4 520-1050
FF M6 x 25 mm socket pin screw 4 520-1211
GG M8 x 15 mm socket button screw 6 520-1068
HH M8 x 40 mm socket pin screw 4 520-1152
II .219 ID x .5 OD x .5 HT spacer 4 540-1057
JJ .344 ID x .75 OD x .5 HT spacer 4 540-1059
KK universal plasma tilt multi washer 6 580-1036
LL M6 x 20 mm socket pin screw 4 520-9554
MM M6 x 30 mm socket pin screw 4 520-1067
NN M8 x 25 mm socket pin screw 4 520-1101
OO M10 x 15 mm socket scre
w
4 520-9262

4 of 41 ISSUED: 02-25-11 SHEET #: 009-9052-2 10-30-11
Z
R
S
G
D
C
V
P
H
X
M
W
L
OO
IJ
O
Q
Parts List continued
MM
GG
Some parts may appear slightly different than illustrated.
AA BB CC HH DD FFEE
KK
JJ
II LL NN
E
F
AB
T
N

5 of 41 ISSUED: 02-25-11 SHEET #: 009-9052-2 10-30-11
Insert right leg (S) into base housing (D) as shown in fig. 1.1. Then align holes in right leg with holes in base
housing (D). Fasten base housing to right leg using two 3/8-16 x 1.5" bolts (W)and two joint connectors (V).
Tighten using 3/16"allen wrench (Z) and 7/32"allen wrench (M) as shown in fig.1.2.
NOTE: Left and right legs can be identified by looking at the cart from the front.
Repeat for left side with left leg (R).
1
S
W
fig. 1.2
V
fig. 1.1
D
S
FRONT OF CART
FRONT OF LEG
Insert feet (T) into holes of support legs (R&S) and hand thread to secure.
R
T
S
2

6 of 41 ISSUED: 02-25-11 SHEET #: 009-9052-2 10-30-11
L
D
G
X
fig. 3.2
CORD
MANAGEMENT
HOLES
fig. 3.1
Attach upright (G) to base (D), as shown in fig 3.1 using three 3/8-16 x 2.5" socket screws (L) and M10 x .402ID
lock washers (X). Tighten screws using 7/32" allen wrench (M).
NOTE: Be sure cord management holes are in the configuration shown in fig 3.2.
3
Loosely attach four 1/4-20 x 12 mm screws (I) and 1/4-20 nuts (J) to shelf support (C).
4
C
I
J

7 of 41 ISSUED: 02-25-11 SHEET #: 009-9052-2 10-30-11
Slide shelf support (C) onto upright (G) so that 1/4-20 nuts (J) slide into slots of upright (G) as shown in figure 5.1
and detail 1. Slide shelf support to desired height, level, then tighten 1/4-20 x 12mm screws (I) using 4 mm allen
wrench (N).
NOTE: MAXIMUM OF TWO SHELVES
Max height of top shelf is 34" from base.
Max height of second shelf is 28" from base.
SLOT
fig. 5.1
C
5
DETAIL 1
J
G

8 of 41 ISSUED: 02-25-11 SHEET #: 009-9052-2 10-30-11
Attaching Metal Shelf
Attach shelf pan (P) to shelf support (C) using six 8/32 nylock nuts (O) as shown below. Use an adjustable wrench
to tighten six 8/32 nylock nuts (O).
O
P
C
• This shelf is intended for use with equipment
weighing no more than 50 lbs. (22.7 kg) that fits
evenly accross the surface of shelf pan (P). Use with
other equipment may result in instability and cause
personal injury or property damage.
WARNING
6