PEERLESS VPM 25-J Guide

ISSUED: 05-19-04 SHEET #: 081-9032-3 02-14-06
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com 1 of 5
Read instruction sheet before you start installation and assembly.
Maximum Load Capacity:
50 lb (22.7 kg)
Models: VPM 25-J, VPM 25-JS,
SVPM 25-J, SVPM 25-JS
DVD/DVR/VCR Mount for
Jumbo®Mount
Installation and Assembly -
DVD/DVR/VCRMOUNT
JUMBOMOUNT
WIDTH (W) HEIGHT (H) MAXIMUM MINIMUM
13.25" - 17.25" 1.5" - 2.75" 17.25" x 2.50" 13.25" x 1.5"
(337 mm - 438 mm) (38 mm - 70 mm) (438 mm x 64 mm) (337 mm x 38 mm
)
INSIDE DIMENSIONS MEDIA PLAYER DIMENSIONS
Installing a DVD/DVR/VCR Mount to a Jumbo®Mount with Threaded Holes in Center of Tray .................... page3
Installing a DVD/DVR/VCR Mount to a Jumbo Mount with Slots in Center of Tray ........................................ page3
Installing a Single DVD/DVR/VCR Mount........................................................................................................... page4
Installing Multiple DVD/DVR/VCR Mounts.......................................................................................................... page5

ISSUED: 05-19-04 SHEET #: 081-9032-3 02-14-06
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com 2 of 5
E
Peel and place four piecesof adhesive foam (H, I) onthe horizontal cross support andvertical adjusters as shown
infigure 1.1 and 1.2.
fig 1.1 fig 1.2
HORIZONTAL
CROSS
SUPPORT
VERTICALADJUSTER
H
I
CG
H
I
D
F
B
A
VPM 25-J VPM 25-JS SVPM 25-J SVPM 25-JS
Description Qty. Part Part Part Part
ADVD/DVR/DVR mount 1 081-0072 081-0076 081-0073 081-0077
Bhanger bracket 1 1255-275 081-4086 1255-275 081-4086
CM5 x .8 x 8 mm self-tapping phillips screw 8 520-1167 520-2167 520-1167 520-2167
D#10-24 x 1/2" carriage bolt 8 520-9523 520-2104 520-9523 520-2104
E#10-24 nylock nut 8 530-9341 530-9342 530-9341 530-9342
F#10 SAE washer 8 540-9400 540-9442 540-9400 540-9442
GM5 x 1" penta-pin™ tool driver 1 – – 520-9249 520-9249
H1.5" x 4.5" x .125" adhesive foam 2 599-1122 599-1122 599-1122 599-1122
I.375" x 12.75" x .125" adhesive foam 2 599-3802 599-3802 599-3802 599-3802
Parts List

ISSUED: 05-19-04 SHEET #: 081-9032-3 02-14-06
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com 3 of 5
Attachhangerbracket(B)underneaththeJumbomountusing four #10-24 carriage bolts (D), #10 SAE washers
(F), and #10-24 nylock nuts (E) as shown in figure 3.1.Attach DVD/DVR/VCR mount (A) to hanger bracket (B)
using M5 x 8 mm screws (C) as shown in figure 3.2.
fig 3.1 fig 3.2 C
B
F
D
Installing a DVD/DVR/VCR Mount to a Jumbo®Mount with Threaded Holes in
Center of Tray
Attach hanger bracket (B) underneath the Jumbo mount using four M5 x 8 mm screws (C) as in shown figure 2.1.
Attach DVD/DVR/VCR mount (A) to hanger bracket (B) using four M5 x 8 mm screws (C) as in shown figure 2.2.
fig 2.1
B
C
CUTAWAYVIEWOF JUMBOMOUNT
C
fig 2.2
Installing a DVD/DVR/VCR Mount to a Jumbo Mount with Slots in Center of Tray
CUTAWAYVIEWOFJUMBO MOUNT
B
TRAY
THREADEDHOLES
CUTAWAYVIEWOFJUMBO MOUNT
TRAY
SLOTS
B
E
A
CUTAWAYVIEWOFJUMBO MOUNT

ISSUED: 05-19-04 SHEET #: 081-9032-3 02-14-06
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com 4 of 5
Adjust size of DVD/DVR/VCR mount (A) to fit media player by loosening vertical and horizontal adjustment screws
whereshownin figure 4.1 on both sides.Insertmedia player and align front ofplayerwith front of TV on Jumbo
mount.Tightenvertical and horizontal adjustment screws whereshownin figure 4.2 on both sides untilplayer
securely fits in mount.
Note: TV and Jumbo mount not shown in illustrations.
MEDIAPLAYER
fig 4.1
fig 4.2
Installing a Single DVD/DVR/VCR Mount
A
A
HORIZONTAL ADJUSTMENTSCREW
VERTICALADJUSTMENTSCREW
HORIZONTAL ADJUSTMENTSCREW
VERTICALADJUSTMENTSCREW

ISSUED: 05-19-04 SHEET #: 081-9032-3 02-14-06
For customer service call 1-800-729-0307 or 708-865-8870.
Visit the Peerless Web Site at www.peerlessindustries.com 5 of 5
If adhesive foam (H) is covering slots, trim foam (H) to expose slots. Insert four carriage bolts (D)into
slots of upper DVD mount (A). Loosely attach lower DVD mount (A) using four #10 SAE washers (F)
and #10-24 nylock nuts (E). This will allow access to the vertical adjustment screws of the upper mount
by being able to easily move the lower mount. Note: TV and TV mount not shown in illustrations.
Installing Multiple DVD/DVR/VCR Mounts
Adjust size of the upper DVD mount (A) to fit media player by loosening screws on both sides. Insert
mediaplayerandalign front of player with front of TV onTVmount.Tightenverticaland horizontal
adjustment screws where shown on both sides until player securely fits in mount.
Note: To access the vertical adjustment screws of the upper mount, slide the lower mount to the side.
Repeatfortheopposite side.
Centerlower DVD mount(A) and securely tightenfour nuts (E). Repeat beginning of this step to install
the media player into the lower DVD mount.
©2004PeerlessIndustries,Inc.Allrightsreserved.
PeerlessandJumboareregisteredtrademarksandPenta-PinisatrademarkofPeerlessIndustries,Inc.
Allotherbrandandproductnamesaretrademarksorregisteredtrademarksoftheirrespectiveowners.
• Do not stack more than three DVD/DVR/VCR Mounts
fromaTV mount.
WARNING
• Stacked load cannot exceed 50 lb.
WARNING
UPPERMOUNT(A)
LOWERMOUNT(A)
H
VERTICAL
ADJUSTMENT
SCREW
DETAIL 1
E
D
F
UPPERMOUNT
LOWERMOUNT
MEDIAPLAYER
HORIZONTAL ADJUSTMENT
VERTICALADJUSTMENT