Insert the XT60 plug into the DC power input. Controller will initialize and the status LED will turn red (or
blue in older board revision) after 4 seconds. (The 4 seconds wait time duration is on purpose for a new
firmware upload process)
Above 14.5V the Ultimate Powerbox v2 will shut down all output ports to protect your precious equipment
from overvoltage.
USB 3.1 HUB
USB3.1 Hub implementation is an Industrial / Automotive Grade - Temperature Rated (-40°C to +80°C)
USB 3.1 Super-Speed 7-Port Hub Controller.
•4 x USB 3.1 Super Speed and 2 x USB 2.0 High Speed Ports are available at the back of the
controller. The 7th port is used for the internal controller communication.
•Each USB port can provide at max 2.5 Amps of current.
•Multiple Transaction Translators (MTT). One per port
•Each port has a current limit/protection and it will automatically decrease current to 2.5Amps if a
short-circuit detected or a connected device will draw more current than 2.5Amps.
•Each USB port can be switched (VBUS & Data) ON / OFF via the supplied software.
DATA CONNECTIVITY
A USB3 Type B port at the back of the unit accepts the USB3 cable for PC connection.
A 1.8m USB3 type B cable is supplied in the package.
By the time you plug the USB3B cable the UPBv2 spawns 2 x USB Hubs.
1. A USB3.1 Hub which is recognized with the name “USB5807 Hub”
2. A USB2.0 Hub which is recognized with the name “USB2807 Hub”
