Pentax OPTIO S4 Instruction manual

Optio54
(PC Connection Manual)
Viewing Your Digital
Camera Images
On Your PC

Introduction
This booklet explains how to view the images you took with the
PENTAX Optio $4 on your PC. Keep this manual in a safe place.
Regarding copyrights
Images taken using the Optio $4 that are for anything other than personal
enjoyment cannot be used without permission according to the rights as
specified in the Copyright Act. Please take care, as there are even cases
where limitations are placed on taking pictures even for personal enjoyment
during demonstrations, industrial enterprise or as items for display. Images
taken with the purpose of obtaining copyrights also cannot be used outside
the scope of use of the copyright as laid out in the Copyright Act, and care
should be taken here also.
Regarding trademarks
•The SD logo _.. is a trademark.
• PENTAX is a trademark of PENTAX Corporation.
• Optio is a trademark of PENTAX Corporation.
• All other brands or product names are trademarks of registered trademarks
of their respective companies.
• Apple, the Apple logo, AppleScript, the Apple Store, Mac, the Mac logo,
Mac OS, Macintosh, and QuickTime are trademarks of Apple Computer,
Inc., registered in the U.S. and other countries.
• This product supports PRINT Image Matching II.
When used in combination, PRINT Image Matching II enabled digital still
cameras, printers and software help photographers to produce images
more faithful to their intentions.
Copyright 2001 Seiko Epson Corporation. All Rights Reserved.
PRINT Image Matching is a trademark of Seiko Epson Corporation.
• Symbols used in this manual have the following meanings:
_ Gives page numbers explaining related operations.
Gives information that is useful to know.
Gives cautions and notes about the operation.
The PC screenshots in this booklet may differ from your PC, depending on
your model.

Your Digital Camera: From Image Capture to Photo Prints 2
Viewing Digital Camera Images on a Windows PC 4
System Requirements ............................................................... 4
Installing the software ............................................................... 5
Displaying and Copying Images to your PC ............................ 8
Disconnecting the Camera from your PC .............................. 12
Viewing Images on a Macintosh 14
iiiiiiiiiiiiiiiiiiiiii_ii
System Requirements ............................................................. 14
Installing the Software ............................................................. 14
Installing the image processing software (ACDSee TM)........ 16
Displaying Images on your Macintosh ................................... 17
Disconnecting your Camera from your Macintosh ............... 18
About ACDSee TM 19
Launching ACDSee TM.............................................................. 19
Viewing using the Browser 20
About the Browser ................................................................... 20
Viewing images in other folders ............................................. 24
Sorting image files ................................................................... 25
Setting detailed display categories ........................................ 26
Viewing a large version of an image (Viewer) 27
About the Viewer ...................................................................... 27
Panorama Image Stitching with ACD photostitcher 29
Printing an image 32
Printing from the Browser ....................................................... 32
Printing from the Viewer .......................................................... 32
Creating and Printing contact sheets .................................... 33
E-mailing your images from ACDSee TM 34
About ACDInTouch 35 i'i iliiiiiiiiiiiiiiiii
il

iiiiiiiiiiiiiiiiiiiiiiiiiHere are some ways to use the inlages
!!!!!!!!!!!!!!!!!!!!!!!!!captured with your digital camera.
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiilUsey°urm°nit°rl
iiiiiiiiiiiiiiiiiiiiiiiiiConnectyourcameratoaTVwith
iiiiiiiiiiiiiiiiiiiiiiiiianAVcabletoenjoyyourpictures
iiiiiiiiiiiiiiiiiiiiiiiii
!!!!!!!!!!!!!!!!!!!!!!!!!
iiiiiiiiiiiii
|
on the screen.
Camera Operating Manual I
I Use your photo shop I 1
Have prints made from your
card images at a photo shop. _ /
• Set DPOF settings on your
camera, and get prints from
your photo shop. _4¢
Camera Operating Manual
• Select the images for prints.
Is your computer... /
• equipped with a standard USB
interface?
• using Windows 98 /98 SE /
Me /2000 /XP as your OS?
Or Mac OS 8.6 or later?
Connect your camera
and computer with a
USB cable, and copy
the entire folder of
camera images to
your computer.
I
ls your computer... "_
using Windows 95 /NT or a Mac I
OS earlier than 8.6? ._
Transfer your images using a
built-in card slot + PC card
adaptor or a card reader.
• Remove the card from the
camera. When transferring
images on the card to a PC
with another device, make
sure to review the user manual
accompanying that device.

I Use your image data I
Use your e-mail software to attach images to e-mails, or
use them on your homepage.
,_ ACDSee TM 1_4_p 19-35
View Images |
Edit Images [
Save processed images[. Z
E-mail Images |
Manipulate images |
Print images J
* These operations also can be performed using
commercially available image editing software. See
the instructions provided with the software for more
details.
• See the operating manual of your
email software for details on how to
make attachments to emails.
• See the operating manual of the
software you are using for details on
how to use images on your
homepage.
I Use your printer I
Print images from your
computer to your printer.
Some printers can print
directly from cards.
• For details, see the
operating manual of the
printer you are using.
Images sent to the computer can be
saved onto a CD-R or other media.
il

_) You can use the provided USB cable (I-USBT) or a card reader totransfer your digital camera's images to the PC, and you can edit and
.........................print your images using the image viewing software. Here, the
method for viewing images with the provided software (S-SW14)is
explained.
The following software is included in the CD-ROM (S-SW14)
provided.
• USB driver
• Image viewing /editing software (ACDSee TM)
• QuickTimeTM
iiiiiiiiiiiiiiiiiiiiiiii_
• OS: Windows 98 /98 SE /Me /2000
• Windows XP Home Edition /Professional
CPU: Pentium or higher recommended
[ Memory: 64MB minimum
Hard Disk space: 40MB minimum
• USB port must be standard equipment
To play movie pictures, you need UirectX 8.0 or higher and Media
Player (standard equipment with your OS), or quickTime 6.0 or
higher. (Media Player alone is sufficient on Windows Me !XP)
You can download UirectX from the following websites.
www.microsoft.com/windows/directx
, The software cannot be used on Windows 95/NT.
We recommend Usingthe AC Adapter D_AC8when connecting
You[ camera to your Pc: Your image data could be corrupted if
your battery run out during image transfer.
|

iiiiiiiiiiiiiiiiiiiiiiiii'
The procedures for installing the necessary software are explained.
If YOUare using W!ndows 2000 OrW!nd0ws XP (Profess!0nal), d_
°_ Please Login as an administrator user before starting installation.
Refer to your PC's operating manual for instructions on how to togin.
1 Turnonyourcomputer.
2Insert the CD-ROM (S-SW14)into your CD-ROM drive.
The PENTAX Software Installer screen will appear.
, Ifthe PENTAX Software Installer screen is not displayed
Follow the procedure below to display the screenl
1) Double click the [My Computer] icon on the desktop.
2) Double click the [CD-ROM Drive (S:SW!4)] icon:
3) Double click the [Setup.exe] icon.
3 Click your applicable
language.
You can choose the language from
the following: English, French,
German, Spanish, Italian, Japanese
and Chinese.
4Click the [USB Driver] on the
Software Installer screen.
The InstallShield Wizard screen will
appear.
Follow the instruction on the screen.
Complete InstallShield Wizard
screen will appear. _oo_ E
• I

iiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiii_
HHHHHHHHHHHH_
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiil7
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
11111111111111111111111118
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
ijjjjjjjjjjjjjjjjjjjjjjj!_0o_,,j,s
|
Click [Next] and then click [Finish].
Reboot your computer after the screen closes.
Turn your camera off and plug the USB cable into your
camera and into an available USB port on your
computer.
Turn your camera on.
Your computer will automatically detect the camera as new
hardware and window will display a notification confirming
[Hardware Found : PENTAX OPTIO $4] (Windows XP) or [Search
for the best driver for your device (Recommended)] (Windows 98 /
98SE /Me /2000) in the task bar recognized area to begin the
installation.
Double click [My Computer] on the desktop.
When the installation is completed, your camera can then be found
in the [My Computer] window as [Removable Disk].
Make sure that "Removable Disk" is displayed in the [My computer]
window.
In the case of Windows XP, if the SD Memory Card /
MultiMediaCard has a volume labe! attached; the content of the
volume label will be disp!ayed instead of [Removable Disk[. If the SD
MemorY Ca[d /Mu!tiMediaCard is new and has not been formatted;
the manufacturer and capacity of the card may be displayed.

This section describes the procedures for installing ACDSee TM
which lets you view and edit recorded images on your computer.
Whe n multiple accounts have bee n Setup in Windows 2000 or
Windows XP, !0gin bythe authority of the administrator before
installing the software.
1Turn your computer on.
2 Insert the CD-ROM (S-SW14) into your CD-ROM drive.
3 Double-click [My Computer] on the desktop.
4 Double-click the [CD-ROM drive (S-SW14)] icon.
,5 Double-click [Setup.exe].
6 Click your applicable language.
You can choose the language from the following: English, French,
German, Spanish, Italian, Japanese and Chinese.
7 Click [ACDSeeTM].
The Setup screen will appear.
Follow the on-screen guidance and _00 _t"_'r'_'F-:I::_.........
enter the registration information. _s_s/,_::,',_'o_!°'_._.o:1_<;_r'
Reboot your PC after installation
foinish.
If a message such as the one
shown on the right is displayed,
click [Install Quick Time] to first
install Quick Time 6.0.
_r_0 The panoramic image software "Photostitcheril, the image layout
........... and printing software '!FotoSlate:', and the image editing software
"FotoCanvas" also are installed when you install ACDSee TM. il

iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
An explanation of how to display /copy images using ACDSee TM is
ED shown below.
.........................1Turn your computer on.
Turn your camera off, and connect it to the PC with the
USB cable.
iiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiii
|
To view images recorded on a card, insert the SD Memory Card /
MultiMediaCard into the camera.
Turn your camera on.
The Device Detector screen is displayed automatically.
If the Device Detector screen is not displayed, display /copy the
images following the steps in "When the Device Detector screen is
not displayed." on the 9 page.
Confirm that [Copy images to
hard drive] and [Launch
ACDSee TM] are checked, and
click [Next].

Confirm that [My Pictures] is
selected for [Create folder in:],
and click [Next].
The image is copied to the PC, and
the ACDSee TMBrowser starts.
iiiiiiiiiiiiiiiiiiiiiiii
When the Device Detector screen is not displayed.
4Double-click the [ACDSee TM]
icon on the desktop. ,_3D_ee for
PENTAX
5 Double-click [My Computer].
6Double-click [Removable Disk]
(If the SD Memory Card /
MultiMediaCard has a volume
label name, then select that
name).
|

iiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiii_
HHHHHHHHHHHH_
iiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiii
HHHHHHHHHHHH_
iiiiiiiiiiiiiiiiiiiiiiiil_
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii9
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
10
il
Double-click the [DCIM] folder.
Double-click the [xxxPENTX]
folder.
(xxx is a 3-digit number.)
Select the image you wish to
view from the Browser.
(Browser)
Double-click the image to enlarge
(Viewer).
(Viewer)
Select the image you wish to copy from the Browser or
Viewer.

11 Select [Copy To...] from the
[Edit] menu.
The Copy Files screen will appear.
12 Click [More>>], and select the
target folder.
13 Click[OK].
The image is copied to the PC.

iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
HHHHHHHHHHHH_1
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii2
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii4
iiiiiiiiiiiiiiiiiiiiiiiiis
iiiiiiiiiiiiiiiiiiiiiiiii
il
Double-click the [Unplug or
eject hardware] icon in the task
bar recognized area.
The [Remove Hardware] screen will
appear.
Confirm that [PENTAX USB
DISK Device] is selected and
click [Stop].
The [Stop Hardware Device] screen
will appear.
Confirm that [PENTAX USB
DISK Device] is selected and
click [OK].
A message will appear.
Click [OK].
Turn off the camera and
disconnect the USB cable from
your camera and PC,
"The computer is downloading the camera's image data with the
camera is connected te the computer and the camera flash status
lamp (red) is flashing. Image data may be damaged if you d sconnect
the camera during such conditions_
In the event that an error message is displayed in Step 4, confirm that
the flash status lamp has turned off and then disconnect the camera.

You can use the provided USB cable (I-USB7) or a card reader to
transfer your digital camera's images to the PC, and you can edit and
print your images using the image viewing software. Here, the
method for viewing images with the provided software (S-SW14) is
explained.
e
The following software is included inthe CD-ROM (S-SW14) provided.
• Image viewing /editing software (ACDSee TM)
OS: Mac OS 9.0 or higher
(requires QuickTime 6.0 or higher)
• CPU: PowerPC 266MHz or higher
Memory: 8MB minimum
Hard Disk space: 6MB minimum
• USB port must be standare equipment
We recommend using the AC Adapter D:AC8 when connecting Your
camera to Your PC. Your image data could be Co[rupted if your
battery run out during image transfer.
Install the required software as follows.
1 Turn on your Macintosh.
2 ,nserttheCD-ROMIS-SW141
into your Mac's CD-ROM drive.
3 Double click the [CD-ROM (S-
SW14)].
The title screen will appear on your
desktop.
iI
.... " :-r
= ............ i
i

4
5
6
Double Click the [Master Installer].
Double-click the [Master Installer] alias icon.
The PENTAX Software Installer screen will appear.
Click your applicable
language.
You can choose the language from
the following: English, French,
German, Spanish, Italian and
Japanese.
7Click [USB Driver].
The USB driver will be installed.
When installation is completed, reboot your Macintosh.
iiiiiiiiiiiiiiii
CCCI
m

iiiiiiiiiiiiiiiiiiiiiiiii6
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii_°o_
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
il
Turn your Macintosh on.
Insert the CD-ROM (S-SW14) in the CD-ROM drive.
Double-click the CD-ROM (S-SW14) icon.
Double-click the [Install ACDSee TM] icon.
Click your applicable language.
You can choose the language from the following: English, French,
German, Spanish, italian and Japanese.
Click [ACDSeeTM].
The Setup screen will appear.
Follow the on-screen guidance to input registration information and
install the software.
When installation is complete, reboot your Macintosh.
Ifthe message [CarbonLib-xxxxx could not be found] is displayed
during installation, you must add the function expansion file called
"CarbonLib" to the function expansion folder in the system folder in
order to install the provided software in Mac OS 8.6 - 9.2.
This error message is appeared when this function expansion file is
not present or when an old version of the file is present.
The latest version of the Carbon Lib is available on the Apple
website. Download the file and then install it onto Mac OS.
Apple website: http:/twww.Apple.com
Contact Apple for detailed information on how to use Carbon Lib.

iiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiii
iiiiiiii
1
2
3
4
5
6
Turn your Macintosh on.
Turn your camera off, and connect it to the Macintosh
with the USB cable.
To view images recorded on a card, insert the SD Memory Card /
MultiMediaCard into the camera.
Turn your camera on.
The camera is recognized as [untitled] ([NO_NAME] in
OS X) on the desktop. The folder name can be
changed.
Double-click the [ACDSee TM] folder on the desktop.
Double-click the [ACDSee TM] program icon.
An image list (Browser) is displayed.
Open the camera folder.
The camera images are in the [untitled] (or volume label name if
the SD Memory Card has one) _ [DClM] > [XXXPENTX] (XXX is
a three-digit number) folder.
An image list of the camera is displayed. iiiiiiiiiiiiii
iiiiiiiiiiiiiiiii

7Select the image to view from the image list.
Double-click the image you selected. A full-size image is displayed
(Viewer).
_r_,,_ If the SD Memory Card /MultiMediaCard has a volume label, th e
.........._ Volume label name will be displayed instead Of ':untitled' .A new SD
Memory Card /MultiMediaCard unformatted may show the
manufacturer name or model number.
ID:_ : ,
........................See your Macintosh user's manual for how to copy or move files.
Please copy images to your Macintosh before editing them.
iiiiiiiiiiiiiiiiiiiiiiiii
1 Drag [untitled] (or the volume label name on the SD
Memory Card /iultilediaCard) to your trash.
Disconnect the USB cable from your camera and your
Macintosh.
il
iiiiiiiiiiiiiiiiiiiiiiiii_
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiii