Percussion Play Rainbow Trio User manual

1. Attach the steel mount to
the rear of the instrument
with the M8 x20 screws and
2 part security caps. (1.1)
(See Assembly Guide)
Wall Fixed
Ground Surface
KS1,2
KS1 –700mm
KS2 –850mm
Installation Instructions
(1.1)
Instrument
Components:
5. Attach the 1 pair of beater
to the saddle strap on the leg.
(1.3)
(1.3)
7 Kg
Pair Small Red
Beaters X1
Weight of heaviest part 7kg (Metallophone)
BS EN 1176
4. Fix through Plate with
fixings supplied in correct
orientation and height for
intended Key stage. Cover
Fixings with 2 Part Caps
supplied
Spares available from
percussionplay.com or from your
local distributor
Rainbow Trio
Metallophone
Page 1 of 2
1m
1m
1m
Install Instrument with 1m free space (from widest point) around it.
Metric Conversion:
700mm/ 28”
850mm/ 33”
1m/ 39”
M6x20 Security Screw
x2
M6 Saddle Strap
x1
2 Part Cover Cap
x4
M8x20 Security Screw
x4
Fence Fix
Components: 2 Part Cover Cap
x4
M8x20 Security Screw
x4
M8x40 Security Screw
x8
M8 Barrel Nut
x8
3.Fix Metallophone onto
Plastic railing mounts at
desired height for users using
screws provided (See
Assembly Guide)
2. Attach Railing Mount to
Fence with M8x40 and
Barrel Nuts provided. Make
sure this is locked tightly into
place (See Assembly Guide)

COMPONENTS LIST:
2 Part Cover Cap X8
Saddle Strap X1
M6x20 Pin torx X2
M8 Nyloc nut X4
M8x20 Pin torx X8
M8x40 Pin torx X8
M8x16 Barrel Nut X8
Assembly Guide PPCADE
(1.1)
7 Kg
Pair Small Red
Beaters X1
Rainbow Trio
Metallophone
Page 2 of 2
BS EN 1176
Thread Lock Solution
Required (Not Supplied)
Thread Lock Solution
Required (Not Supplied)
Instrument
Components:
M6x20 Security Screw
x2
M6 Saddle Strap
x1
2 Part Cover Cap
x4
TX 30 Driver Bit
x1
TX 40 Driver Bit
x2
Tools:
Spares available from
percussionplay.com or from your
local distributor
Wall Fixed
M8x20 Security Screw
x4
Fence Fix
Components: 2 Part Cover Cap
x4
M8x40 Security Screw
x8
M8 Barrel Nut
x8